I guess the hardware is shipping now?  So, time to release.
I never heard back about some calibration details, particularly about
whether the floor level is reliable on many items or just mine...
but I guess it must have been fine if it's shipping.

* wurkkos-ts26:
  calibrated for latest TS26 sample
  wurkkos-ts26: increase default floor to 5/150 to reduce flicker (by request)
  renamed wurkkos-ts25-boost to wurkkos-ts26
  wurkkos ts25-boost: calibrated for 20250210 prototype
  ts25-boost: calibrated for new prototype - battery voltage readings - RGB button aux - less moon flicker (but brighter, less efficient moon) - reduced blink brightness   (old brightness was so high it was throwing off battery readings)
  ts25-boost: reduced visible PWM, made party strobe less blurry
  wurkkos-ts25-boost: calibrated the battery voltage measurements
  attiny1616 mcu_vdivider_raw2cooked: factor in the offset, not just slope
  added wurkkos-ts25-boost (early version made from spec, no clue if it works)

# Conflicts:
#	MODELS

It's the same as &hank-emisar-d3aa, but needed some minor tweaks:

- wait longer before measuring the battery,
  because it's hard to tighten the tailcap fast enough

- ramp adjustments to compensate for slightly different "gear ratio"

It won't light up below DSM 10/32640, and is really unstable.
Wurkkos wants no flickering on the lowest mode, so I raised
the floor to 20/32640, which is as low as it can go.

So, no real "moon" mode on this light.

(side effect: also enables RGB front aux while main LEDs are on,
 since the two are a single circuit internally and can't be separated)
(changed at Hank's request)

(by request)

just getting the latest upstream changes

* trunk:
  ChangeLog for new minor release
  spacing, misc cleanup, made anchors work, fixed bad link
  there's another inherited setting now
  added more info about manual memory remembering channel mode
  space
  added info about simple vs advanced UI, and attiny85 battcheck resolution
  reworded a bit for consistency with the rest of the manual
  made new settings apply to all button LEDs on lights bigger than 8K ROM
  Manual: Add how to check which UI the user is in
  Manual: Document extra digit for battery check
  Manual: Add default for post-off voltage display
  Manual: Add channel mode to manual memory
  Manual: Update options inherited by Simple UI
  Add a feature to make RGB voltage configurable
  Improve manual - add links for navigability, and an FAQ
  Document aux LED settings in Tactical Mode

Improve manual - add links for navigability, and a FAQ
https://github.com/ToyKeeper/anduril/pull/51

* pr51-SiteRelEnby-improve-manual:
  spacing, misc cleanup, made anchors work, fixed bad link
  Improve manual - add links for navigability, and an FAQ

(for some reason, "a name" wasn't working when clicked, but "a id" does)