I guess the hardware is shipping now?  So, time to release.
I never heard back about some calibration details, particularly about
whether the floor level is reliable on many items or just mine...
but I guess it must have been fine if it's shipping.

* wurkkos-ts26:
  calibrated for latest TS26 sample
  wurkkos-ts26: increase default floor to 5/150 to reduce flicker (by request)
  renamed wurkkos-ts25-boost to wurkkos-ts26
  wurkkos ts25-boost: calibrated for 20250210 prototype
  ts25-boost: calibrated for new prototype - battery voltage readings - RGB button aux - less moon flicker (but brighter, less efficient moon) - reduced blink brightness   (old brightness was so high it was throwing off battery readings)
  ts25-boost: reduced visible PWM, made party strobe less blurry
  wurkkos-ts25-boost: calibrated the battery voltage measurements
  attiny1616 mcu_vdivider_raw2cooked: factor in the offset, not just slope
  added wurkkos-ts25-boost (early version made from spec, no clue if it works)

# Conflicts:
#	MODELS

It's the same as &hank-emisar-d3aa, but needed some minor tweaks:

- wait longer before measuring the battery,
  because it's hard to tighten the tailcap fast enough

- ramp adjustments to compensate for slightly different "gear ratio"

(the product name changed upstream)

- changed model number from 0281 to 0171
- cleaned up blink_negative and AUXLED_RGB_DIFFERENT_PORTS a little
  (but the latter needs a complete refactor, as soon as the
   hardware abstraction code can handle aux LEDs better)
- cleaned up USE_LONG_BLINK_FOR_NEGATIVE_SIGN a little
- removed USE_OTG_IN_MOMENTARY since it's not actually used
- moved hw/loneoceans/lume-x1-avr32dd20/* files into hw/hank/lume-x1/
- superficial cleanup on hank/lume-x1/hwdef.*
- removed some of the extra stuff from hank/lume-x1/anduril.h
- adjusted calibration (especially ramp table) on hank-lume-x1
  (ramp shape is pretty close to a D4K-boost now, but with more firefly modes)
  (calibration is based on a sample size of 1, further testing needed)

The [PR](https://github.com/ToyKeeper/anduril/pull/37) has a lot of other
stuff in it, so I'm just picking out the parts needed for this particular
light, and leaving the rest for later.

Will need further edits before merging into trunk.

* 'ff-pl47g2-219' of github.com:jim-p/anduril:
  Add Fireflies PL47G2-219 variant.