It won't light up below DSM 10/32640, and is really unstable.
Wurkkos wants no flickering on the lowest mode, so I raised
the floor to 20/32640, which is as low as it can go.

So, no real "moon" mode on this light.

(by request)

(the product name changed upstream)

- changed from RGB button to RGB front aux
- complete recalibration of voltage sensor
- had to change party strobe timing to make it work again
- still couldn't fix moon, it's flickery AF no matter what I do

* trunk:
  lockout mode now only does momentary moon/low on 1st and 2nd presses, so it no longer flashes on each click while advancing to other functions
  emisar-d3aa: reduced preflash by changing timing of power enable steps
  fix "Error: Missing download info for actions/upload-artifact@v3"
  fixed model number of hank-lume-x1 in MODELS
  Added changelogs for 2025-04-29 release.
  memester egg (was written a long time ago on a whim and never committed,  may as well do it now)
  changed hank-lume-x1 model number back on 2024-09-28 for some reason, and didn't commit... saving now to change branches, but should delete this commit if it turns out there was no reason for it
  hank-lume-x1: minor calibration and cleaning - calibrated party strobe - removed duplicate or commented-out code - added a basic readme
  hank-lume-x1 cleanup and calibration, part 1: - changed model number from 0281 to 0171 - cleaned up blink_negative and AUXLED_RGB_DIFFERENT_PORTS a little   (but the latter needs a complete refactor, as soon as the    hardware abstraction code can handle aux LEDs better) - cleaned up USE_LONG_BLINK_FOR_NEGATIVE_SIGN a little - removed USE_OTG_IN_MOMENTARY since it's not actually used - moved hw/loneoceans/lume-x1-avr32dd20/* files into hw/hank/lume-x1/ - superficial cleanup on hank/lume-x1/hwdef.* - removed some of the extra stuff from hank/lume-x1/anduril.h - adjusted calibration (especially ramp table) on hank-lume-x1   (ramp shape is pretty close to a D4K-boost now, but with more firefly modes)   (calibration is based on a sample size of 1, further testing needed)
  cherry-picked hank-lume-x1 code from https://github.com/loneoceans/anduril/commit/d83ebb75dab8c462b7efa841bccc00a136ff15a2
  merged SammysHP's fix for TS10 lower-Vf LEDs, reverted my fix (they are now two separate build targets)
  wurkkos-ts10-rgbaux: limit max power to 200/255, at Wurkkos's request (because otherwise the light destroys its own LEDs at full power)
  Add Wurkkos TS10 RGB with reduced FET output

(they are now two separate build targets)

Add Wurkkos TS10 RGB with reduced FET output PR #90

* 'wurkkos-ts10-lowfet' of github.com:SammysHP/anduril:
  Add Wurkkos TS10 RGB with reduced FET output

(because otherwise the light destroys its own LEDs at full power)

- battery voltage readings
- RGB button aux
- less moon flicker (but brighter, less efficient moon)
- reduced blink brightness
  (old brightness was so high it was throwing off battery readings)