Tweak a few MT35Mini settings

4 files changed, 101 insertions, 2 deletions

diff --git a/hwdef-Mateminco_MT35-Mini.h b/hwdef-Mateminco_MT35-Mini.h
new file mode 100644
index 0000000..344f658
--- /dev/null
+++ b/hwdef-Mateminco_MT35-Mini.h
@@ -0,0 +1,47 @@
+#ifndef HWDEF_MT35_MINI_H
+#define HWDEF_MT35_MINI_H
+
+/* Mateminco MT35-Mini / Astrolux FT03
+ *           ----
+ *   Reset -|1  8|- VCC
+ * eswitch -|2  7|- Aux LED
+ *  1x7135 -|3  6|- NC
+ *     GND -|4  5|- FET
+ *           ----
+ */
+
+#define PWM_CHANNELS 2
+
+#ifndef SWITCH_PIN
+#define SWITCH_PIN   PB3    // pin 2
+#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
+#endif
+
+#ifndef PWM1_PIN
+#define PWM1_PIN PB4        // pin 3, 1x7135 PWM
+#define PWM1_LVL OCR1B      // OCR1B is the output compare register for PB0
+#endif
+
+#ifndef PWM2_PIN
+#define PWM2_PIN PB0        // pin 5, FET PWM
+#define PWM2_LVL OCR0A      // OCR0A is the output compare register for PB4
+#endif
+
+#define ADC_PRSCL   0x07    // clk/128
+
+// average drop across diode on this hardware
+#ifndef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 7  // add 0.35V
+#endif
+
+// lighted button
+#ifndef AUXLED_PIN
+#define AUXLED_PIN   PB2    // pin 7
+#endif
+
+#define FAST 0xA3           // fast PWM both channels
+#define PHASE 0xA1          // phase-correct PWM both channels
+
+#define LAYOUT_DEFINED
+
+#endif
diff --git a/spaghetti-monster/anduril/MODELS b/spaghetti-monster/anduril/MODELS
index 317bb6a..14392b6 100644
--- a/spaghetti-monster/anduril/MODELS
+++ b/spaghetti-monster/anduril/MODELS
@@ -44,6 +44,7 @@ Model	Name                          	MCU
 0441	ff-e01                        	attiny85
 0511	mateminco-mf01s               	attiny85
 0521	mateminco-mf01-mini           	attiny85
+0531	mateminco-mf35-mini           	attiny85
 0611	blf-q8                        	attiny85
 0612	sofirn-sp36                   	attiny85
 0613	blf-q8-t1616                  	attiny1616
@@ -55,4 +56,4 @@ Model	Name                          	MCU
 
 Duplicates:
 
-Missing:
\ No newline at end of file
+Missing:
diff --git a/spaghetti-monster/anduril/cfg-mateminco-mt35-mini.h b/spaghetti-monster/anduril/cfg-mateminco-mt35-mini.h
new file mode 100644
index 0000000..b409c39
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-mateminco-mt35-mini.h
@@ -0,0 +1,51 @@
+// Mateminco MT35 Mini / Astrolux  FT03
+#define MODEL_NUMBER "0531"
+#include "hwdef-Mateminco_MT35-Mini.h"
+// ATTINY: 85
+
+// this light should be fine running a bit hotter than most
+#undef DEFAULT_THERM_CEIL
+#define DEFAULT_THERM_CEIL 55
+
+// the button lights up
+#define USE_INDICATOR_LED
+// the button is visible while main LEDs are on
+#define USE_INDICATOR_LED_WHILE_RAMPING
+
+// enable blinking aux LEDs
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3  // every 0.128 s
+
+#define RAMP_LENGTH 150
+// level_calc.py fifth 2 150 7135 1 1 120 FET 1 10 2000
+#define PWM1_LEVELS 1,2,2,3,4,5,6,7,8,9,11,13,14,16,18,21,23,26,28,31,35,38,41,45,49,53,58,63,67,73,78,84,90,96,102,109,116,124,131,139,147,156,165,174,184,194,204,215,226,237,249,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2,2,3,4,5,6,7,8,9,10,11,12,14,15,16,17,18,20,21,22,24,25,27,28,30,31,33,35,36,38,40,42,43,45,47,49,51,53,55,57,59,62,64,66,68,71,73,75,78,80,83,86,88,91,94,96,99,102,105,108,111,114,117,120,124,127,130,134,137,140,144,148,151,155,159,162,166,170,174,178,182,186,190,195,199,203,208,212,217,221,226,231,235,240,245,250,255
+#define DEFAULT_LEVEL 46
+#define MAX_1x7135 52
+#define HALFSPEED_LEVEL 20
+#define QUARTERSPEED_LEVEL 10
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 112
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// safe limit ~33% power
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL RAMP_LENGTH
+#define SIMPLE_UI_STEPS 5
+
+// stop panicking at ~40% power
+#define THERM_FASTER_LEVEL 120
+#define MIN_THERM_STEPDOWN 95 // ~600 lumens
+#define THERM_RESPONSE_MAGNITUDE 16  // smaller adjustments, big body.  default = 64
+
+#define DEFAULT_2C_STYLE 1  // enable 2 click turbo (Anduril 1 style)
+
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
diff --git a/spaghetti-monster/anduril/version.h b/spaghetti-monster/anduril/version.h
index c67379c..d6e3f1a 100644
--- a/spaghetti-monster/anduril/version.h
+++ b/spaghetti-monster/anduril/version.h
@@ -1 +1 @@
-#define VERSION_NUMBER "20220105"
+#define VERSION_NUMBER "20220124"