Calibrated ROT66-219b build better.

The ramp on this thing is weird, and likes to stall at channel boundaries.
Also, enabled hard turbo drop, calibrated the level for that,
and turned off blinking button to make room.

1 files changed, 16 insertions, 8 deletions

diff --git a/spaghetti-monster/anduril/cfg-ff-rot66.h b/spaghetti-monster/anduril/cfg-ff-rot66.h
index 8a63719..6cae4fd 100644
--- a/spaghetti-monster/anduril/cfg-ff-rot66.h
+++ b/spaghetti-monster/anduril/cfg-ff-rot66.h
@@ -4,13 +4,18 @@
 #define USE_INDICATOR_LED
 // the button is visible while main LEDs are on
 #define USE_INDICATOR_LED_WHILE_RAMPING
-// enable blinking indicator LED while off
-// (no, it doesn't really make sense on this light)
-#define TICK_DURING_STANDBY
+// enable blinking indicator LED while off?
+//#define TICK_DURING_STANDBY
 
+// If TICK_DURING_STANDBY is enabled...
 // off mode: high (2)
 // lockout: blinking (3)
-#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 2)
+//#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 2)
+
+// ... or if TICK_DURING_STANDBY is turned off:
+// off mode: high (2)
+// lockout: off (0)
+#define INDICATOR_LED_DEFAULT_MODE ((0<<2) + 2)
 
 
 #ifdef RAMP_LENGTH
@@ -25,16 +30,19 @@
 // first 65 steps copied from FW3A
 #define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,7,8,9,10,12,13,14,15,17,19,20,22,24,26,29,31,34,36,39,42,45,48,51,55,59,62,66,70,75,79,84,89,93,99,104,110,115,121,127,134,140,147,154,161,168,176,184,192,200,209,217,226,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
 // remaining steps from this command:
-// level_calc.py 3 150 7135 1 1.4 110.1 7135 4 1 1058.5 FET 1 10 4500
-#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,5,7,8,10,12,14,15,17,20,22,24,26,29,32,34,37,40,43,47,50,54,57,61,65,70,74,79,83,88,94,99,105,111,117,123,130,137,144,151,159,167,175,184,193,202,212,222,233,244,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+// level_calc.py 3 150 7135 1 1.4 110.1 7135 14 1 1058.5 FET 1 10 4500
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,15,17,18,20,21,23,25,27,29,31,33,36,38,41,43,46,49,52,55,58,62,65,69,73,77,81,86,90,95,100,105,111,116,122,128,135,141,148,155,163,170,178,187,195,204,214,224,234,244,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
 #define PWM3_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,4,8,12,16,21,25,30,35,40,45,50,56,62,68,74,81,87,94,101,109,116,124,133,141,150,159,168,178,188,198,209,220,231,243,255
 #define MAX_1x7135 65
 #define MAX_Nx7135 115
 #define HALFSPEED_LEVEL 14
-#define QUARTERSPEED_LEVEL 5
+#define QUARTERSPEED_LEVEL 8
 
 // regulate down faster when the FET is active, slower otherwise
-#define THERM_FASTER_LEVEL 120  // throttle back faster when high
+#define THERM_FASTER_LEVEL 130  // throttle back faster when high
+
+// play it safe, don't try to regulate above the recommended safe level
+#define THERM_HARD_TURBO_DROP
 
 // don't do this
 #undef BLINK_AT_CHANNEL_BOUNDARIES