moved variant builds under their parent, like "d4-219" -> "d4/219"

2 files changed, 0 insertions, 73 deletions

diff --git a/hw/hank/noctigon-kr4-boost/anduril.h b/hw/hank/noctigon-kr4-boost/anduril.h
deleted file mode 100644
index f0c5b92..0000000
--- a/hw/hank/noctigon-kr4-boost/anduril.h
+++ /dev/null
@@ -1,16 +0,0 @@
-// Noctigon KR4 (12V) config options for Anduril
-// (and Noctigon KR1)
-// Copyright (C) 2020-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-// the only things different from dm11-boost are:
-// - e-switch is on a different pin (defined in hwdef)
-// - different model number
-#include "hank/noctigon-dm11-boost/anduril.h"
-#include "hank/noctigon-kr4-boost/hwdef.h"
-#undef MODEL_NUMBER
-#define MODEL_NUMBER "0216"
-#include "hank/anduril.h"
-// ATTINY: 1634
-
diff --git a/hw/hank/noctigon-kr4-boost/hwdef.h b/hw/hank/noctigon-kr4-boost/hwdef.h
deleted file mode 100644
index 1ee2627..0000000
--- a/hw/hank/noctigon-kr4-boost/hwdef.h
+++ /dev/null
@@ -1,57 +0,0 @@
-// Noctigon KR4 boost driver layout (attiny1634)
-// Copyright (C) 2020-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-/*
- * (based on Noctigon DM11-boost and KR4)
- * (is basically the same except the switch is on a different pin)
- *
- * Pin / Name / Function
- *   1    PA6   (none) (PWM1B) (reserved for DD drivers)
- *   2    PA5   R: red aux LED (PWM0B)
- *   3    PA4   G: green aux LED
- *   4    PA3   B: blue aux LED
- *   5    PA2   L: button LED
- *   6    PA1   (none)
- *   7    PA0   (none)
- *   8    GND   GND
- *   9    VCC   VCC
- *  10    PC5   (none)
- *  11    PC4   (none)
- *  12    PC3   RESET
- *  13    PC2   (none)
- *  14    PC1   SCK
- *  15    PC0   boost PMIC enable (PWM0A not used)
- *  16    PB3   main LED PWM (PWM1A)
- *  17    PB2   MISO / e-switch (PCINT10)
- *  18    PB1   MOSI / battery voltage (ADC6)
- *  19    PB0   Opamp power
- *  20    PA7   (none)  (PCINT7)
- *      ADC12   thermal sensor
- *
- * Main LED power uses one pin to turn the Opamp on/off,
- * and one pin to control Opamp power level.
- * Linear brightness control uses the power level pin, with dynamic PWM.
- * The on/off pin is only used to turn the main LED on and off,
- * not to change brightness.
- */
-
-#include "hank/noctigon-dm11-boost/hwdef.h"
-
-// e-switch is on a different pin
-#undef SWITCH_PIN
-#undef SWITCH_PCINT
-#undef SWITCH_PCIE
-#undef SWITCH_PCMSK
-#undef SWITCH_PORT
-#undef SWITCH_PUE
-#undef PCINT_vect
-#define SWITCH_PIN   PB2     // pin 17
-#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt
-#define SWITCH_PCIE  PCIE1   // PCIE1 is for PCINT[11:8]
-#define SWITCH_PCMSK PCMSK1  // PCMSK1 is for PCINT[11:8]
-#define SWITCH_PORT  PINB    // PINA or PINB or PINC
-#define SWITCH_PUE   PUEB    // pullup group B
-#define PCINT_vect   PCINT1_vect  // ISR for PCINT[11:8]
-