moved variant builds under their parent, like "d4-219" -> "d4/219"

2 files changed, 73 insertions, 0 deletions

diff --git a/hw/hank/noctigon-kr4/boost/anduril.h b/hw/hank/noctigon-kr4/boost/anduril.h
new file mode 100644
index 0000000..a3b33ee
--- /dev/null
+++ b/hw/hank/noctigon-kr4/boost/anduril.h
@@ -0,0 +1,16 @@
+// Noctigon KR4 (12V) config options for Anduril
+// (and Noctigon KR1)
+// Copyright (C) 2020-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+// the only things different from dm11-boost are:
+// - e-switch is on a different pin (defined in hwdef)
+// - different model number
+#include "hank/noctigon-dm11/boost/anduril.h"
+#include "hank/noctigon-kr4/boost/hwdef.h"
+#undef MODEL_NUMBER
+#define MODEL_NUMBER "0216"
+#include "hank/anduril.h"
+// ATTINY: 1634
+
diff --git a/hw/hank/noctigon-kr4/boost/hwdef.h b/hw/hank/noctigon-kr4/boost/hwdef.h
new file mode 100644
index 0000000..f17d263
--- /dev/null
+++ b/hw/hank/noctigon-kr4/boost/hwdef.h
@@ -0,0 +1,57 @@
+// Noctigon KR4 boost driver layout (attiny1634)
+// Copyright (C) 2020-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+/*
+ * (based on Noctigon DM11-boost and KR4)
+ * (is basically the same except the switch is on a different pin)
+ *
+ * Pin / Name / Function
+ *   1    PA6   (none) (PWM1B) (reserved for DD drivers)
+ *   2    PA5   R: red aux LED (PWM0B)
+ *   3    PA4   G: green aux LED
+ *   4    PA3   B: blue aux LED
+ *   5    PA2   L: button LED
+ *   6    PA1   (none)
+ *   7    PA0   (none)
+ *   8    GND   GND
+ *   9    VCC   VCC
+ *  10    PC5   (none)
+ *  11    PC4   (none)
+ *  12    PC3   RESET
+ *  13    PC2   (none)
+ *  14    PC1   SCK
+ *  15    PC0   boost PMIC enable (PWM0A not used)
+ *  16    PB3   main LED PWM (PWM1A)
+ *  17    PB2   MISO / e-switch (PCINT10)
+ *  18    PB1   MOSI / battery voltage (ADC6)
+ *  19    PB0   Opamp power
+ *  20    PA7   (none)  (PCINT7)
+ *      ADC12   thermal sensor
+ *
+ * Main LED power uses one pin to turn the Opamp on/off,
+ * and one pin to control Opamp power level.
+ * Linear brightness control uses the power level pin, with dynamic PWM.
+ * The on/off pin is only used to turn the main LED on and off,
+ * not to change brightness.
+ */
+
+#include "hank/noctigon-dm11/boost/hwdef.h"
+
+// e-switch is on a different pin
+#undef SWITCH_PIN
+#undef SWITCH_PCINT
+#undef SWITCH_PCIE
+#undef SWITCH_PCMSK
+#undef SWITCH_PORT
+#undef SWITCH_PUE
+#undef PCINT_vect
+#define SWITCH_PIN   PB2     // pin 17
+#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt
+#define SWITCH_PCIE  PCIE1   // PCIE1 is for PCINT[11:8]
+#define SWITCH_PCMSK PCMSK1  // PCMSK1 is for PCINT[11:8]
+#define SWITCH_PORT  PINB    // PINA or PINB or PINC
+#define SWITCH_PUE   PUEB    // pullup group B
+#define PCINT_vect   PCINT1_vect  // ISR for PCINT[11:8]
+