reorganized project files (part 1)

(just moved files, didn't change the contents yet,
 and nothing will work without updating #includes and build scripts and stuff)

2 files changed, 158 insertions, 0 deletions

diff --git a/hw/mateminco/mt35-mini/cfg.h b/hw/mateminco/mt35-mini/cfg.h
new file mode 100644
index 0000000..1ca5008
--- /dev/null
+++ b/hw/mateminco/mt35-mini/cfg.h
@@ -0,0 +1,65 @@
+// Mateminco MT35 Mini / Astrolux  FT03
+// Copyright (C) 2022-2023 (original author TBD), Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define MODEL_NUMBER "0531"
+#include "hwdef-mateminco-mt35-mini.h"
+// ATTINY: 85
+
+// the button lights up
+#define USE_INDICATOR_LED
+// the button is visible while main LEDs are on
+#define USE_INDICATOR_LED_WHILE_RAMPING
+
+#define RAMP_SIZE 150
+
+// level_calc.py fifth 2 150 7135 1 1 120 FET 1 10 2000
+#define PWM1_LEVELS 1,2,2,3,4,5,6,7,8,9,11,13,14,16,18,21,23,26,28,31,35,38,41,45,49,53,58,63,67,73,78,84,90,96,102,109,116,124,131,139,147,156,165,174,184,194,204,215,226,237,249,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2,2,3,4,5,6,7,8,9,10,11,12,14,15,16,17,18,20,21,22,24,25,27,28,30,31,33,35,36,38,40,42,43,45,47,49,51,53,55,57,59,62,64,66,68,71,73,75,78,80,83,86,88,91,94,96,99,102,105,108,111,114,117,120,124,127,130,134,137,140,144,148,151,155,159,162,166,170,174,178,182,186,190,195,199,203,208,212,217,221,226,231,235,240,245,250,255
+
+#define DEFAULT_LEVEL       46
+#define MAX_1x7135          52
+#define HALFSPEED_LEVEL     20
+#define QUARTERSPEED_LEVEL  10
+
+#define RAMP_SMOOTH_FLOOR    1
+#define RAMP_SMOOTH_CEIL     112
+#define RAMP_DISCRETE_FLOOR  10
+#define RAMP_DISCRETE_CEIL   RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS  7
+
+// safe limit ~33% power
+#define SIMPLE_UI_FLOOR  RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL   RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_STEPS  5
+
+// this light should be fine running a bit hotter than most
+#undef DEFAULT_THERM_CEIL
+#define DEFAULT_THERM_CEIL 55
+
+// stop panicking at ~40% power
+#define THERM_FASTER_LEVEL 120
+#define MIN_THERM_STEPDOWN 95 // ~600 lumens
+#define THERM_RESPONSE_MAGNITUDE 16  // smaller adjustments, big body.  default = 64
+
+#define DEFAULT_2C_STYLE 1  // enable 2 click turbo (Anduril 1 style)
+
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+// enable extra features
+#define USE_SMOOTH_STEPS
+
+// too big, turn off extra features
+#undef USE_TACTICAL_MODE
+#undef USE_SOS_MODE
+//#undef USE_RAMP_AFTER_MOON_CONFIG
+//#undef USE_RAMP_SPEED_CONFIG
+//#undef USE_VOLTAGE_CORRECTION
+//#undef USE_2C_STYLE_CONFIG
+
diff --git a/hw/mateminco/mt35-mini/hwdef.h b/hw/mateminco/mt35-mini/hwdef.h
new file mode 100644
index 0000000..015c813
--- /dev/null
+++ b/hw/mateminco/mt35-mini/hwdef.h
@@ -0,0 +1,93 @@
+// Mateminco MT35-Mini / Astrolux FT03
+// Copyright (C) 2022-2023 (original author TBD), Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+/*
+ *           ----
+ *   Reset -|1  8|- VCC
+ * eswitch -|2  7|- Aux LED
+ *  1x7135 -|3  6|- NC
+ *     GND -|4  5|- FET
+ *           ----
+ */
+
+#define ATTINY 85
+#include <avr/io.h>
+
+#define HWDEF_C_FILE hwdef-emisar-d4.c
+
+// channel modes
+// * 0. FET+7135 stacked
+#define NUM_CHANNEL_MODES  1
+enum CHANNEL_MODES {
+    CM_MAIN = 0,
+};
+
+#define DEFAULT_CHANNEL_MODE  CM_MAIN
+
+// right-most bit first, modes are in fedcba9876543210 order
+#define CHANNEL_MODES_ENABLED 0b00000001
+
+
+#define PWM_CHANNELS 2  // old, remove this
+
+#define PWM_BITS      8       // attiny85 only supports up to 8 bits
+#define PWM_GET       PWM_GET8
+#define PWM_DATATYPE  uint8_t
+#define PWM_DATATYPE2 uint16_t
+#define PWM1_DATATYPE uint8_t   // little FET ramp
+#define PWM2_DATATYPE uint8_t   // big FET ramp
+
+#define PWM_TOP_INIT  255    // highest value used in top half of ramp
+
+// 1x7135 channel
+#define CH1_PIN  PB4        // pin 3, 1x7135 PWM
+#define CH1_PWM  OCR1B      // OCR1B is the output compare register for PB4
+
+// DD FET channel
+#define CH2_PIN  PB0        // pin 5, FET PWM
+#define CH2_PWM  OCR0A      // OCR0A is the output compare register for PB0
+
+// lighted button
+#define AUXLED_PIN   PB2    // pin 7
+
+// e-switch
+#ifndef SWITCH_PIN
+#define SWITCH_PIN   PB3    // pin 2
+#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
+#endif
+
+#define ADC_PRSCL   0x07    // clk/128
+
+// average drop across diode on this hardware
+#ifndef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 7  // add 0.35V
+#endif
+
+#define FAST 0xA3           // fast PWM both channels
+#define PHASE 0xA1          // phase-correct PWM both channels
+
+
+inline void hwdef_setup() {
+    // configure PWM channels
+    DDRB = (1 << CH1_PIN)
+         | (1 << CH2_PIN);
+
+    // configure PWM channels
+    TCCR0B = 0x01; // pre-scaler for timer (1 => 1, 2 => 8, 3 => 64...)
+    TCCR0A = PHASE;
+
+    // Second PWM counter is ... weird
+    TCCR1 = _BV (CS10);
+    GTCCR = _BV (COM1B1) | _BV (PWM1B);
+    OCR1C = PWM_TOP_INIT;  // Set ceiling value to maximum
+
+    // configure e-switch
+    PORTB = (1 << SWITCH_PIN);  // e-switch is the only input
+    PCMSK = (1 << SWITCH_PIN);  // pin change interrupt uses this pin
+}
+
+
+#define LAYOUT_DEFINED
+