renamed cfg.h -> anduril.h so each UI can have its own cfg (part 1)

(still need to update file contents afterward,
 but doing it in a separate commit so git can detect renames easier)

1 files changed, 0 insertions, 125 deletions

diff --git a/hw/sofirn/lt1s-pro/cfg.h b/hw/sofirn/lt1s-pro/cfg.h
deleted file mode 100644
index c6a0f3e..0000000
--- a/hw/sofirn/lt1s-pro/cfg.h
+++ /dev/null
@@ -1,125 +0,0 @@
-// Sofirn LT1S Pro config file for Anduril
-// Copyright (C) 2022-2023 (FIXME)
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0623"
-#include "sofirn/lt1s-pro/hwdef.h"
-// ATTINY: 1616
-
-// off mode: low (1)
-// lockout: blinking (3)
-// Standby power usage:
-// - aux high: 6.9 mA (30 days)
-// - aux low:  0.16 mA (3.5 years)
-// - red moon: 2.17 mA (96 days)
-// - white moon: 1.47 mA (141 days)
-// Low mode isn't bright enough to be useful on this light,
-// but at least it doesn't drain the battery 3X faster than moon mode.
-// (it seriously would be more practical to just use moon instead)
-#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
-
-// channel modes...
-// CM_WHITE, CM_AUTO2, CM_AUTO3, CM_RED, CM_WHITE_RED
-#define DEFAULT_CHANNEL_MODE           CM_AUTO3
-
-#define FACTORY_RESET_WARN_CHANNEL     CM_RED
-#define FACTORY_RESET_SUCCESS_CHANNEL  CM_WHITE
-
-#define CONFIG_WAITING_CHANNEL         CM_RED
-#define CONFIG_BLINK_CHANNEL           CM_WHITE
-
-// blink numbers on the main LEDs by default (but allow user to change it)
-#define DEFAULT_BLINK_CHANNEL  CM_RED
-
-// how much to increase total brightness at middle tint
-// (0 = 100% brightness, 64 = 200% brightness)
-// seems unnecessary on this light
-#define TINT_RAMPING_CORRECTION 0
-
-#define RAMP_SIZE 150
-// use dynamic PWM instead of plain 8-bit
-// (so we can get lower lows and a smoother ramp)
-// (also, red LEDs use a QX7138 chip which has max PWM speed of 10 kHz,
-//  and it behaves erratically at full speed,
-//  so PWM here is 576 clock cycles long to keep the speed low enough)
-//
-// This first ramp seems a bit too low: 0.2 / 1.9 / 10 / 37 / 109 / 272 / 600 lm
-// level_calc.py 5.99 1 150 7135 1 0.2 600 --pwm dyn:77:16383:575:3
-//#define PWM_LEVELS 1,1,2,2,3,4,4,5,6,6,7,8,9,9,10,11,11,12,13,13,14,15,15,16,16,17,18,18,19,19,19,20,20,21,21,21,21,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,23,23,23,23,24,24,24,25,26,26,27,28,29,30,32,33,34,36,38,40,42,44,46,48,50,52,55,57,59,62,65,68,70,73,77,80,83,86,90,94,97,101,105,110,114,118,123,128,133,138,143,148,154,160,166,172,178,185,191,198,205,213,220,228,236,244,252,261,270,279,289,298,308,319,329,340,351,363,374,386,399,411,424,438,452,466,480,495,510,526,542,558,575
-//#define PWM_TOPS 16383,10869,13246,8043,11458,12772,10093,11043,11450,9664,9991,10091,10048,8868,8838,8730,7814,7724,7589,6864,6748,6604,6024,5899,5398,5287,5159,4754,4638,4287,3963,3876,3594,3511,3265,3038,2829,2770,2586,2417,2260,2115,1981,1857,1742,1636,1537,1445,1360,1281,1207,1138,1073,1013,957,904,855,848,803,760,720,714,677,643,637,630,599,592,585,577,569,579,570,560,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575
-//
-// This ramp is a bit higher: 0.2 / 3 / 19 / 61 / 152 / 320 / 600 lm
-// level_calc.py 4.001 1 150 7135 1 0.2 600 --pwm dyn:78:16383:575:3.333
-#define PWM1_LEVELS 1,1,2,4,5,6,7,8,9,10,12,13,14,15,17,18,19,21,22,23,24,25,26,27,28,29,30,31,32,33,33,34,34,35,35,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,36,37,37,38,38,39,40,40,41,43,44,45,47,48,50,52,54,56,59,62,64,67,69,72,75,78,81,84,87,90,94,97,101,104,108,112,116,120,124,128,133,137,142,147,151,156,161,167,172,177,183,189,194,200,206,213,219,226,232,239,246,253,260,268,275,283,291,299,307,316,324,333,342,351,361,370,380,390,400,410,420,431,442,453,464,476,487,499,511,523,536,549,562,575
-#define PWM_TOPS 16383,8174,7823,14429,13603,12806,12046,11328,10652,10017,10402,9742,9134,8575,8615,8089,7605,7536,7093,6684,6307,5959,5636,5337,5060,4802,4562,4337,4127,3929,3633,3468,3216,3077,2862,2744,2559,2390,2234,2091,1960,1838,1727,1623,1528,1439,1357,1280,1209,1143,1081,1024,970,919,872,828,787,770,732,716,682,668,654,624,611,613,600,587,587,574,573,571,569,566,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575,575
-// TODO? 200% power at top of ramp on white blend mode
-// 2nd table handles "200% power" turbo
-//#define PWM2_LEVELS ...
-// tops for PWM2
-//#define PWM3_LEVELS ...
-#define MAX_1x7135 75
-#define MIN_THERM_STEPDOWN 75  // should be above highest dyn_pwm level
-#define HALFSPEED_LEVEL 12
-#define QUARTERSPEED_LEVEL 5
-
-// the default of 26 looks a bit flat, so increase it
-#define CANDLE_AMPLITUDE 40
-
-// override default ramp style
-#undef RAMP_STYLE
-#define RAMP_STYLE 1  // 0 = smooth, 1 = stepped
-// set floor and ceiling as far apart as possible
-// because this lantern isn't overpowered
-#define RAMP_SMOOTH_FLOOR    1
-#define RAMP_SMOOTH_CEIL     150
-//#define RAMP_DISCRETE_FLOOR 17  // 17 50 83 116 150
-#define RAMP_DISCRETE_FLOOR  1  // 1 25 50 75 100 125 150
-#define RAMP_DISCRETE_CEIL   150
-#define RAMP_DISCRETE_STEPS  7
-
-// LT1S can handle heat well, so don't limit simple mode
-//#define SIMPLE_UI_FLOOR 10  // 10 45 80 115 150
-#define SIMPLE_UI_FLOOR  1
-#define SIMPLE_UI_CEIL   150
-#define SIMPLE_UI_STEPS  7
-
-// Allow 3C (or 6C) in Simple UI (toggle smooth or stepped ramping)
-#define USE_SIMPLE_UI_RAMPING_TOGGLE
-
-// allow Aux Config and Strobe Modes in Simple UI
-#define USE_EXTENDED_SIMPLE_UI
-
-// turn on at med-low brightness by default (level 50/150, or ramp step 3/7)
-// (also sets lockout mode 2H to a useful level)
-#define DEFAULT_MANUAL_MEMORY 50
-// reset to default after being off for 10 minutes
-#define DEFAULT_MANUAL_MEMORY_TIMER 10
-
-// enable 2 click turbo (Anduril 1 style)
-#define DEFAULT_2C_STYLE 1
-
-#define USE_SOS_MODE
-#define USE_SOS_MODE_IN_BLINKY_GROUP
-
-#define USE_POLICE_COLOR_STROBE_MODE
-#define POLICE_COLOR_STROBE_CH1        CM_RED
-#define POLICE_COLOR_STROBE_CH2        CM_WHITE
-
-#undef  TACTICAL_LEVELS
-#define TACTICAL_LEVELS 120,30,(RAMP_SIZE+3)  // high, low, police strobe
-
-// don't blink while ramping
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-#ifdef BLINK_AT_RAMP_FLOOR
-#undef BLINK_AT_RAMP_FLOOR
-#endif
-#ifdef BLINK_AT_RAMP_CEIL
-#undef BLINK_AT_RAMP_CEIL
-#endif
-// without this, it's really hard to tell when ramping up stops
-#define BLINK_AT_RAMP_CEIL
-
-#define USE_SOFT_FACTORY_RESET