diff options
| author | Selene ToyKeeper | 2025-06-04 00:55:40 -0600 |
|---|---|---|
| committer | Selene ToyKeeper | 2025-06-04 00:55:40 -0600 |
| commit | c8a29a67f286d1d9d84ab000697b5727676b8784 (patch) | |
| tree | c6f1c9758e6ebaf920fd8b6b4c9edf66769e3c41 /hw/wurkkos/ts10/rgbaux-lowfet/README.md | |
| parent | ts25-boost: calibrated for new prototype (diff) | |
| parent | lockout mode now only does momentary moon/low on 1st and 2nd presses, (diff) | |
| download | anduril-c8a29a67f286d1d9d84ab000697b5727676b8784.tar.gz anduril-c8a29a67f286d1d9d84ab000697b5727676b8784.tar.bz2 anduril-c8a29a67f286d1d9d84ab000697b5727676b8784.zip | |
Merge branch 'trunk' into wurkkos-ts25-boost
* trunk:
lockout mode now only does momentary moon/low on 1st and 2nd presses, so it no longer flashes on each click while advancing to other functions
emisar-d3aa: reduced preflash by changing timing of power enable steps
fix "Error: Missing download info for actions/upload-artifact@v3"
fixed model number of hank-lume-x1 in MODELS
Added changelogs for 2025-04-29 release.
memester egg (was written a long time ago on a whim and never committed, may as well do it now)
changed hank-lume-x1 model number back on 2024-09-28 for some reason, and didn't commit... saving now to change branches, but should delete this commit if it turns out there was no reason for it
hank-lume-x1: minor calibration and cleaning - calibrated party strobe - removed duplicate or commented-out code - added a basic readme
hank-lume-x1 cleanup and calibration, part 1: - changed model number from 0281 to 0171 - cleaned up blink_negative and AUXLED_RGB_DIFFERENT_PORTS a little (but the latter needs a complete refactor, as soon as the hardware abstraction code can handle aux LEDs better) - cleaned up USE_LONG_BLINK_FOR_NEGATIVE_SIGN a little - removed USE_OTG_IN_MOMENTARY since it's not actually used - moved hw/loneoceans/lume-x1-avr32dd20/* files into hw/hank/lume-x1/ - superficial cleanup on hank/lume-x1/hwdef.* - removed some of the extra stuff from hank/lume-x1/anduril.h - adjusted calibration (especially ramp table) on hank-lume-x1 (ramp shape is pretty close to a D4K-boost now, but with more firefly modes) (calibration is based on a sample size of 1, further testing needed)
cherry-picked hank-lume-x1 code from https://github.com/loneoceans/anduril/commit/d83ebb75dab8c462b7efa841bccc00a136ff15a2
merged SammysHP's fix for TS10 lower-Vf LEDs, reverted my fix (they are now two separate build targets)
wurkkos-ts10-rgbaux: limit max power to 200/255, at Wurkkos's request (because otherwise the light destroys its own LEDs at full power)
Add Wurkkos TS10 RGB with reduced FET output
Diffstat (limited to 'hw/wurkkos/ts10/rgbaux-lowfet/README.md')
| -rw-r--r-- | hw/wurkkos/ts10/rgbaux-lowfet/README.md | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/hw/wurkkos/ts10/rgbaux-lowfet/README.md b/hw/wurkkos/ts10/rgbaux-lowfet/README.md new file mode 100644 index 0000000..2173723 --- /dev/null +++ b/hw/wurkkos/ts10/rgbaux-lowfet/README.md @@ -0,0 +1,12 @@ +# Wurkkos TS10 w/ RGB aux + reduced-power FET + +Starting in mid-2024, some TS10 models were built with LEDs with lower Vf, and +they destroy themselves when operated at full power from the direct-drive FET. +This branch runs at half power instead, to avoid hardware damage. + +Regardless, sustained turbo is not recommended on any TS10 models, because they +are overpowered for their size and LED type. + +- https://budgetlightforum.com/t/psa-anyone-with-a-new-ts10-do-not-flash-it-with-tks-ts10-rgbaux-firmware-or-turbo-will-fry-its-leds/225124 +- https://www.reddit.com/r/flashlight/comments/1emyyq9/psa_dont_flash_wurkkosts10rgbauxhex_to_your_new/ + |