diff options
| author | Selene ToyKeeper | 2022-04-14 20:34:21 -0600 |
|---|---|---|
| committer | Selene ToyKeeper | 2022-04-14 20:34:21 -0600 |
| commit | 4f6ae9925fefed4694bc87584040edc5426cdd94 (patch) | |
| tree | 151cf2f7eee3a9f45063a513bfc2cdf42d00061f /hw | |
| parent | merged gchart's latest changes: (diff) | |
| download | anduril-4f6ae9925fefed4694bc87584040edc5426cdd94.tar.gz anduril-4f6ae9925fefed4694bc87584040edc5426cdd94.tar.bz2 anduril-4f6ae9925fefed4694bc87584040edc5426cdd94.zip | |
moved fuses from cfg to hwdef, renamed LED_EN/DISABLE_DELAY to LED_ON/OFF_DELAY
(also really should rename LED_* to CH1_* and LED2_* to CH2_*)
Diffstat (limited to '')
| -rw-r--r-- | hwdef-Sofirn_SP10-Pro.h | 18 | ||||
| -rw-r--r-- | hwdef-thefreeman-lin16dac.h | 2 |
2 files changed, 18 insertions, 2 deletions
diff --git a/hwdef-Sofirn_SP10-Pro.h b/hwdef-Sofirn_SP10-Pro.h index 7d0d7f5..e47131a 100644 --- a/hwdef-Sofirn_SP10-Pro.h +++ b/hwdef-Sofirn_SP10-Pro.h @@ -53,7 +53,7 @@ PA1 : Boost Enable #define LED_ENABLE_PIN PIN1_bp #define LED_ENABLE_PORT PORTA_OUT -#define LED_DISABLE_DELAY 4 +#define LED_OFF_DELAY 4 #define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened #define DUAL_VOLTAGE_FLOOR 21 // for AA/14500 boost drivers, don't indicate low voltage if below this level @@ -122,4 +122,20 @@ inline void hwdef_setup() { } +// set fuses, these carry over to the ELF file but not the HEX file +// we need this for enabling BOD in Active Mode from the factory. +// settings can be verified / dumped from the ELF file using this +// command: avr-objdump -d -S -j .fuse anduril.elf +FUSES = { + .WDTCFG = FUSE_WDTCFG_DEFAULT, /* Watchdog Configuration */ + .BODCFG = FUSE_ACTIVE0_bm, /* BOD Configuration */ + .OSCCFG = FUSE_OSCCFG_DEFAULT, /* Oscillator Configuration */ + .TCD0CFG = FUSE_TCD0CFG_DEFAULT, /* TCD0 Configuration */ + .SYSCFG0 = FUSE_SYSCFG0_DEFAULT, /* System Configuration 0 */ + .SYSCFG1 = FUSE_SYSCFG1_DEFAULT, /* System Configuration 1 */ + .APPEND = FUSE_APPEND_DEFAULT, /* Application Code Section End */ + .BOOTEND = FUSE_BOOTEND_DEFAULT, /* Boot Section End */ +}; + + #endif diff --git a/hwdef-thefreeman-lin16dac.h b/hwdef-thefreeman-lin16dac.h index adb7886..9d6b145 100644 --- a/hwdef-thefreeman-lin16dac.h +++ b/hwdef-thefreeman-lin16dac.h @@ -47,7 +47,7 @@ Read voltage from VCC pin, has PFET so no drop // For turning on and off the op-amp #define LED2_ENABLE_PIN PIN7_bp #define LED2_ENABLE_PORT PORTA_OUT -#define LED2_ENABLE_DELAY 80 // how many ms to delay turning on the lights after enabling the channel +#define LED2_ON_DELAY 80 // how many ms to delay turning on the lights after enabling the channel // average drop across diode on this hardware #ifndef VOLTAGE_FUDGE_FACTOR |