LT1S: added thermal regulation

... and a bunch of gradual_tick functions
... and abstracted out some of the tint calculations
... and moved some UI settings into cfg.h

2 files changed, 192 insertions, 86 deletions

diff --git a/hwdef-Sofirn_LT1S-Pro.c b/hwdef-Sofirn_LT1S-Pro.c
index 61d2157..a6d2b8f 100644
--- a/hwdef-Sofirn_LT1S-Pro.c
+++ b/hwdef-Sofirn_LT1S-Pro.c
@@ -5,68 +5,51 @@
 #pragma once
 
 
-// single set of LEDs with 1 power channel and dynamic PWM
-void set_level_1ch_dyn(uint8_t level) {
-    if (level == 0) {
-        RED_PWM_LVL  = 0;
-        PWM_CNT      = 0;  // reset phase
-    } else {
-        level --;  // PWM array index = level - 1
-        RED_PWM_LVL  = PWM_GET(pwm1_levels, level);
-        // pulse frequency modulation, a.k.a. dynamic PWM
-        PWM_TOP = PWM_GET(pwm_tops, level);
-        // force reset phase when turning on from zero
-        // (because otherwise the initial response is inconsistent)
-        if (! actual_level) PWM_CNT = 0;
-    }
-}
+// calculate a "tint ramp" blend between 2 channels
+// results are placed in *warm and *cool vars
+// brightness : total amount of light units to distribute
+// top : maximum allowed brightness per channel
+// blend : ratio between warm and cool (0 = warm, 128 = 50%, 255 = cool)
+void calc_2ch_blend(
+    PWM_DATATYPE *warm,
+    PWM_DATATYPE *cool,
+    PWM_DATATYPE brightness,
+    PWM_DATATYPE top,
+    uint8_t blend) {
 
-
-// warm + cool blend w/ middle sag correction and dynamic PWM
-void set_level_2ch_dyn_blend(uint8_t level) {
     #ifndef TINT_RAMPING_CORRECTION
     #define TINT_RAMPING_CORRECTION 26  // 140% brightness at middle tint
     #endif
 
-    if (level == 0) {
-        WARM_PWM_LVL = 0;
-        COOL_PWM_LVL = 0;
-        PWM_CNT      = 0;  // reset phase
-        return;
-    }
-
-    level --;  // PWM array index = level - 1
-    PWM_DATATYPE brightness = PWM_GET(pwm1_levels, level);
-    uint16_t top = PWM_GET(pwm_tops, level);
-
     // calculate actual PWM levels based on a single-channel ramp
-    // and a global tint value
-    uint16_t warm_PWM, cool_PWM;
-    uint8_t mytint = channel_mode_args[channel_mode];
-
+    // and a blend value
+    PWM_DATATYPE warm_PWM, cool_PWM;
     PWM_DATATYPE2 base_PWM = brightness;
+
     #if defined(TINT_RAMPING_CORRECTION) && (TINT_RAMPING_CORRECTION > 0)
+        uint8_t level = actual_level - 1;
+
         // middle tints sag, so correct for that effect
         // by adding extra power which peaks at the middle tint
         // (correction is only necessary when PWM is fast)
         if (level > HALFSPEED_LEVEL) {
             base_PWM = brightness
                      + ((((PWM_DATATYPE2)brightness) * TINT_RAMPING_CORRECTION / 64)
-                        * triangle_wave(mytint) / 255);
+                        * triangle_wave(blend) / 255);
         }
         // fade the triangle wave out when above 100% power,
         // so it won't go over 200%
         if (brightness > top) {
             base_PWM -= 2 * (
                              ((brightness - top) * TINT_RAMPING_CORRECTION / 64)
-                             * triangle_wave(mytint) / 255
+                             * triangle_wave(blend) / 255
                         );
         }
         // guarantee no more than 200% power
         if (base_PWM > (top << 1)) { base_PWM = top << 1; }
     #endif
 
-    cool_PWM = (((PWM_DATATYPE2)mytint * (PWM_DATATYPE2)base_PWM) + 127) / 255;
+    cool_PWM = (((PWM_DATATYPE2)blend * (PWM_DATATYPE2)base_PWM) + 127) / 255;
     warm_PWM = base_PWM - cool_PWM;
     // when running at > 100% power, spill extra over to other channel
     if (cool_PWM > top) {
@@ -77,6 +60,76 @@ void set_level_2ch_dyn_blend(uint8_t level) {
         warm_PWM = top;
     }
 
+    *warm = warm_PWM;
+    *cool = cool_PWM;
+}
+
+
+// calculate a 3-channel "auto tint" blend
+// (like red -> warm white -> cool white)
+// results are placed in *a, *b, and *c vars
+// level : ramp level to convert into 3 channel levels
+// (assumes ramp table is "pwm1_levels")
+void calc_auto_3ch_blend(
+    PWM_DATATYPE *a,
+    PWM_DATATYPE *b,
+    PWM_DATATYPE *c,
+    uint8_t level) {
+
+    PWM_DATATYPE vpwm = PWM_GET(pwm1_levels, level);
+
+    // tint goes from 0 (red) to 127 (warm white) to 255 (cool white)
+    uint8_t mytint;
+    mytint = 255 * (uint16_t)level / RAMP_SIZE;
+
+    // red is high at 0, low at 255 (linear)
+    *a = (((PWM_DATATYPE2)(255 - mytint)
+         * (PWM_DATATYPE2)vpwm) + 127) / 255;
+    // warm white is low at 0 and 255, high at 127 (linear triangle)
+    *b = (((PWM_DATATYPE2)triangle_wave(mytint)
+         * (PWM_DATATYPE2)vpwm) + 127) / 255;
+    // cool white is low at 0, high at 255 (linear)
+    *c = (((PWM_DATATYPE2)mytint
+         * (PWM_DATATYPE2)vpwm) + 127) / 255;
+
+}
+
+
+// single set of LEDs with 1 power channel and dynamic PWM
+void set_level_red(uint8_t level) {
+    if (level == 0) {
+        RED_PWM_LVL  = 0;
+        PWM_CNT      = 0;  // reset phase
+    } else {
+        level --;  // PWM array index = level - 1
+        RED_PWM_LVL  = PWM_GET(pwm1_levels, level);
+        // pulse frequency modulation, a.k.a. dynamic PWM
+        PWM_TOP = PWM_GET(pwm_tops, level);
+        // force reset phase when turning on from zero
+        // (because otherwise the initial response is inconsistent)
+        if (! actual_level) PWM_CNT = 0;
+    }
+}
+
+
+// warm + cool blend w/ dynamic PWM
+void set_level_white_blend(uint8_t level) {
+    if (level == 0) {
+        WARM_PWM_LVL = 0;
+        COOL_PWM_LVL = 0;
+        PWM_CNT      = 0;  // reset phase
+        return;
+    }
+
+    level --;  // PWM array index = level - 1
+
+    PWM_DATATYPE warm_PWM, cool_PWM;
+    PWM_DATATYPE brightness = PWM_GET(pwm1_levels, level);
+    PWM_DATATYPE top = PWM_GET(pwm_tops, level);
+    uint8_t blend = channel_mode_args[channel_mode];
+
+    calc_2ch_blend(&warm_PWM, &cool_PWM, brightness, top, blend);
+
     WARM_PWM_LVL = warm_PWM;
     COOL_PWM_LVL = cool_PWM;
     PWM_TOP = top;
@@ -85,7 +138,7 @@ void set_level_2ch_dyn_blend(uint8_t level) {
 
 
 // "auto tint" channel mode with dynamic PWM
-void set_level_auto_3ch_dyn_blend(uint8_t level) {
+void set_level_auto_3ch_blend(uint8_t level) {
     if (level == 0) {
         WARM_PWM_LVL = 0;
         COOL_PWM_LVL = 0;
@@ -95,25 +148,12 @@ void set_level_auto_3ch_dyn_blend(uint8_t level) {
     }
 
     level --;  // PWM array index = level - 1
-    PWM_DATATYPE vpwm = PWM_GET(pwm1_levels, level);
-    // pulse frequency modulation, a.k.a. dynamic PWM
-    uint16_t top = PWM_GET(pwm_tops, level);
-
-    // tint goes from 0 (red) to 127 (warm white) to 255 (cool white)
-    uint8_t mytint;
-    mytint = 255 * (uint16_t)level / RAMP_SIZE;
 
     PWM_DATATYPE a, b, c;
+    calc_auto_3ch_blend(&a, &b, &c, level);
 
-    // red is high at 0, low at 255
-    a = (((PWM_DATATYPE2)(255 - mytint)
-          * (PWM_DATATYPE2)vpwm) + 127) / 255;
-    // warm white is low at 0 and 255, high at 127
-    b = (((PWM_DATATYPE2)triangle_wave(mytint)
-          * (PWM_DATATYPE2)vpwm) + 127) / 255;
-    // cool white is low at 0, high at 255
-    c = (((PWM_DATATYPE2)mytint
-          * (PWM_DATATYPE2)vpwm) + 127) / 255;
+    // pulse frequency modulation, a.k.a. dynamic PWM
+    uint16_t top = PWM_GET(pwm_tops, level);
 
     RED_PWM_LVL  = a;
     WARM_PWM_LVL = b;
@@ -127,10 +167,9 @@ void set_level_auto_3ch_dyn_blend(uint8_t level) {
 void set_level_red_white_blend(uint8_t level) {
     // set the warm+cool white LEDs first
     channel_mode = CM_WHITE;
-    set_level_2ch_dyn_blend(level);
+    set_level_white_blend(level);
     channel_mode = CM_WHITE_RED;
 
-    // set the red LED as a ratio of the white output level
     if (level == 0) {
         RED_PWM_LVL = 0;
         PWM_CNT     = 0;  // reset phase
@@ -140,14 +179,91 @@ void set_level_red_white_blend(uint8_t level) {
     level --;  // PWM array index = level - 1
     PWM_DATATYPE vpwm = PWM_GET(pwm1_levels, level);
 
+    // set the red LED as a ratio of the white output level
     // 0 = no red
     // 255 = red at 100% of white channel PWM
     uint8_t ratio = channel_mode_args[channel_mode];
 
-    PWM_DATATYPE red_pwm;
-    red_pwm = (((PWM_DATATYPE2)ratio * (PWM_DATATYPE2)vpwm) + 127) / 255;
-
-    RED_PWM_LVL = red_pwm;
+    RED_PWM_LVL = (((PWM_DATATYPE2)ratio * (PWM_DATATYPE2)vpwm) + 127) / 255;
     if (! actual_level) PWM_CNT = 0;  // reset phase
 }
 
+
+///// "gradual tick" functions for smooth thermal regulation /////
+
+void gradual_tick_red() {
+    GRADUAL_TICK_SETUP();
+
+    GRADUAL_ADJUST_1CH(pwm1_levels, RED_PWM_LVL);
+
+    if ((RED_PWM_LVL  == PWM_GET(pwm1_levels,  gt)))
+    {
+        GRADUAL_IS_ACTUAL();
+    }
+}
+
+
+void gradual_tick_white_blend() {
+    uint8_t gt = gradual_target;
+    if (gt < actual_level) gt = actual_level - 1;
+    else if (gt > actual_level) gt = actual_level + 1;
+    gt --;
+
+    // figure out what exact PWM levels we're aiming for
+    PWM_DATATYPE warm_PWM, cool_PWM;
+    PWM_DATATYPE brightness = PWM_GET(pwm1_levels, gt);
+    PWM_DATATYPE top        = PWM_GET(pwm_tops, gt);
+    uint8_t blend           = channel_mode_args[channel_mode];
+
+    calc_2ch_blend(&warm_PWM, &cool_PWM, brightness, top, blend);
+
+    // move up/down if necessary
+    GRADUAL_ADJUST_SIMPLE(warm_PWM, WARM_PWM_LVL);
+    GRADUAL_ADJUST_SIMPLE(cool_PWM, COOL_PWM_LVL);
+
+    // check for completion
+    if (   (WARM_PWM_LVL == warm_PWM)
+        && (COOL_PWM_LVL == cool_PWM)
+       )
+    {
+        GRADUAL_IS_ACTUAL();
+    }
+}
+
+
+void gradual_tick_auto_3ch_blend() {
+    uint8_t gt = gradual_target;
+    if (gt < actual_level) gt = actual_level - 1;
+    else if (gt > actual_level) gt = actual_level + 1;
+    gt --;
+
+    // figure out what exact PWM levels we're aiming for
+    PWM_DATATYPE red, warm, cool;
+    calc_auto_3ch_blend(&red, &warm, &cool, gt);
+
+    // move up/down if necessary
+    GRADUAL_ADJUST_SIMPLE(red,  RED_PWM_LVL);
+    GRADUAL_ADJUST_SIMPLE(warm, WARM_PWM_LVL);
+    GRADUAL_ADJUST_SIMPLE(cool, COOL_PWM_LVL);
+
+    // check for completion
+    if (   (RED_PWM_LVL  == red)
+        && (WARM_PWM_LVL == warm)
+        && (COOL_PWM_LVL == cool)
+       )
+    {
+        GRADUAL_IS_ACTUAL();
+    }
+}
+
+
+void gradual_tick_red_white_blend() {
+    // do the white blend thing...
+    channel_mode = CM_WHITE;
+    gradual_tick_white_blend();
+    channel_mode = CM_WHITE_RED;
+    // ... and then update red to the closest ramp level
+    // (coarse red adjustments aren't visible here anyway)
+    set_level_red(actual_level);
+}
+
diff --git a/hwdef-Sofirn_LT1S-Pro.h b/hwdef-Sofirn_LT1S-Pro.h
index c994d09..84623fd 100644
--- a/hwdef-Sofirn_LT1S-Pro.h
+++ b/hwdef-Sofirn_LT1S-Pro.h
@@ -38,33 +38,18 @@ Driver pinout:
 // TODO: or maybe if args are defined, the USE_ should be auto-set?
 // 128=middle CCT, N/A, N/A, 255=100% red
 #define CHANNEL_MODE_ARGS 128,0,0,255
-#define SET_LEVEL_MODES      set_level_2ch_dyn_blend, \
-                             set_level_auto_3ch_dyn_blend, \
-                             set_level_1ch_dyn, \
+#define SET_LEVEL_MODES      set_level_white_blend, \
+                             set_level_auto_3ch_blend, \
+                             set_level_red, \
                              set_level_red_white_blend
-// TODO: gradual ticking for thermal regulation
-#define GRADUAL_TICK_MODES   gradual_tick_2ch_blend, \
+// gradual ticking for thermal regulation
+#define GRADUAL_TICK_MODES   gradual_tick_white_blend, \
                              gradual_tick_auto_3ch_blend, \
-                             gradual_tick_1ch, \
+                             gradual_tick_red, \
                              gradual_tick_red_white_blend
-// can use some of the common handlers?
-//#define USE_SET_LEVEL_2CH_BLEND
-//#define USE_SET_LEVEL_AUTO_3CH_BLEND
-//#define USE_SET_LEVEL_1CH
-//#define USE_SET_LEVEL_RED_WHITE_BLEND
-// TODO:
-//#define USE_GRADUAL_TICK_2CH_BLEND
-//#define USE_GRADUAL_TICK_AUTO_3CH_BLEND
-//#define USE_GRADUAL_TICK_1CH
-//#define USE_GRADUAL_TICK_RED_WHITE_BLEND
-
-#define DEFAULT_CHANNEL_MODE           CM_AUTO
-
-#define FACTORY_RESET_WARN_CHANNEL     CM_RED
-#define FACTORY_RESET_SUCCESS_CHANNEL  CM_WHITE
-
-#define POLICE_COLOR_STROBE_CH1        CM_RED
-#define POLICE_COLOR_STROBE_CH2        CM_WHITE
+// can use some of the common handlers
+//#define USE_CALC_2CH_BLEND
+//#define USE_CALC_AUTO_3CH_BLEND
 
 // TODO: remove this as soon as it's not needed
 #define PWM_CHANNELS 1
@@ -119,11 +104,16 @@ Driver pinout:
 
 
 // custom channel modes
-void set_level_1ch_dyn(uint8_t level);
-void set_level_2ch_dyn_blend(uint8_t level);
-void set_level_auto_3ch_dyn_blend(uint8_t level);
+void set_level_red(uint8_t level);
+void set_level_white_blend(uint8_t level);
+void set_level_auto_3ch_blend(uint8_t level);
 void set_level_red_white_blend(uint8_t level);
 
+void gradual_tick_red();
+void gradual_tick_white_blend();
+void gradual_tick_auto_3ch_blend();
+void gradual_tick_red_white_blend();
+
 
 inline void hwdef_setup() {