diff options
| author | Selene ToyKeeper | 2021-08-12 05:32:51 -0600 |
|---|---|---|
| committer | Selene ToyKeeper | 2021-08-12 05:32:51 -0600 |
| commit | 73b67cccbe050be9e7e7ea671ffbbdd1d6f14f61 (patch) | |
| tree | f81c6bd9c835cf16d563c1b4436b6fe76c62e4c7 /hwdef-Noctigon_KR4.h | |
| parent | changed Noctigon KR4 from fixed to dynamic PWM TOP value, for later use (diff) | |
| download | anduril-73b67cccbe050be9e7e7ea671ffbbdd1d6f14f61.tar.gz anduril-73b67cccbe050be9e7e7ea671ffbbdd1d6f14f61.tar.bz2 anduril-73b67cccbe050be9e7e7ea671ffbbdd1d6f14f61.zip | |
got PFM / dynamic PWM actually working on Noctigon KR4
(and also added "jump start moon" to it)
(and generally finished adding dynamic PWM support to FSM)
Diffstat (limited to '')
| -rw-r--r-- | hwdef-Noctigon_KR4.h | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/hwdef-Noctigon_KR4.h b/hwdef-Noctigon_KR4.h index 58492ac..eee4e08 100644 --- a/hwdef-Noctigon_KR4.h +++ b/hwdef-Noctigon_KR4.h @@ -41,8 +41,9 @@ #include <avr/io.h> #define PWM_CHANNELS 2 -#define PWM_BITS 10 // 0 to 1023 at 4 kHz, not 0 to 255 at 16 kHz -#define PWM_TOP 1023 +#define PWM_BITS 16 // data type needs 16 bits, not 8 +#define PWM_TOP 255 // highest value used in top half of ramp +#define USE_DYN_PWM // dynamic frequency and speed #define SWITCH_PIN PB2 // pin 17 #define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt @@ -58,13 +59,13 @@ #define PWM1_PIN PB3 // pin 16, Opamp reference #define PWM1_LVL OCR1A // OCR1A is the output compare register for PB3 +#define PWM1_CNT TCNT1 // for dynamic PWM, reset phase #define PWM2_PIN PA6 // pin 1, DD FET PWM #define PWM2_LVL OCR1B // OCR1B is the output compare register for PA6 // PWM parameters of both channels are tied together because they share a counter #define PWM1_TOP ICR1 // holds the TOP value for for variable-resolution PWM -#define PWM2_TOP ICR1 // holds the TOP value for for variable-resolution PWM #define LED_ENABLE_PIN PB0 // pin 19, Opamp power #define LED_ENABLE_PORT PORTB // control port for PB0 @@ -144,7 +145,7 @@ inline void hwdef_setup() { ; // set PWM resolution - PWM1_TOP = 1023; + PWM1_TOP = PWM_TOP; // set up e-switch //PORTB = (1 << SWITCH_PIN); // TODO: configure PORTA / PORTB / PORTC? |