Initial D4S support for Anduril. (but only the parts which can't be public yet)

2 files changed, 37 insertions, 2 deletions

diff --git a/spaghetti-monster/anduril/anduril.c b/spaghetti-monster/anduril/anduril.c
index 3d25c8c..2fec5b4 100644
--- a/spaghetti-monster/anduril/anduril.c
+++ b/spaghetti-monster/anduril/anduril.c
@@ -21,6 +21,7 @@
 /********* User-configurable options *********/
 // Physical driver type (uncomment one of the following or define it at the gcc command line)
 //#define FSM_EMISAR_D4_DRIVER
+//#define FSM_EMISAR_D4S_DRIVER
 //#define FSM_BLF_Q8_DRIVER
 //#define FSM_FW3A_DRIVER
 //#define FSM_BLF_GT_DRIVER
@@ -71,6 +72,16 @@
 #define TICK_DURING_STANDBY
 #define VOLTAGE_FUDGE_FACTOR 7  // add 0.35V
 
+#elif defined(FSM_EMISAR_D4S_DRIVER)
+#define USE_INDICATOR_LED
+#define TICK_DURING_STANDBY
+#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V
+#define RAMP_SMOOTH_CEIL (MAX_LEVEL*4/5)
+#undef MIN_THERM_STEPDOWN  // this should be lower, because 3x7135 instead of 1x7135
+#define MIN_THERM_STEPDOWN 60  // lowest value it'll step down to
+#undef THERM_DOUBLE_SPEED_LEVEL  // this should be lower too, because this light is a hot rod
+#define THERM_DOUBLE_SPEED_LEVEL (RAMP_LENGTH*2/3)  // throttle back faster when high
+
 #elif defined(FSM_EMISAR_D4_DRIVER)
 #define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V
 
@@ -227,8 +238,12 @@ uint8_t ramp_discrete_step_size;  // don't set this
 // bits 0-1 control "off" mode
 // modes are: 0=off, 1=low, 2=high
 // (TODO: 3=blinking)
-//uint8_t indicator_led_mode = (1<<2) + 2;
-uint8_t indicator_led_mode = (2<<2) + 1;
+#ifdef FSM_EMISAR_D4S_DRIVER
+uint8_t indicator_led_mode = (3<<2) + 1;
+#else
+uint8_t indicator_led_mode = (1<<2) + 2;
+//uint8_t indicator_led_mode = (2<<2) + 1;
+#endif
 #endif
 
 // calculate the nearest ramp level which would be valid at the moment
diff --git a/spaghetti-monster/fsm-ramping.h b/spaghetti-monster/fsm-ramping.h
index 86742f6..d530f6a 100644
--- a/spaghetti-monster/fsm-ramping.h
+++ b/spaghetti-monster/fsm-ramping.h
@@ -73,6 +73,26 @@ void gradual_tick();
       #define MAX_1x7135 60   // where it switches from PWM to current control
       #define HALFSPEED_LEVEL 17
       #define QUARTERSPEED_LEVEL 6
+    #elif defined(FSM_EMISAR_D4S_DRIVER)
+      // 3x7135 + FET
+      #if 0
+      // ../../bin/level_calc.py 2 150 7135 1 6 450 FET 1 10 1810
+      // (because it made the ramp look better than accurate values)
+      PROGMEM const uint8_t pwm1_levels[] = { 1,1,2,2,3,3,4,5,5,6,7,7,8,9,10,11,12,13,14,15,16,18,19,20,22,23,25,26,28,30,32,33,35,37,39,42,44,46,48,51,53,56,58,61,64,67,70,73,76,79,83,86,89,93,97,100,104,108,112,116,121,125,129,134,139,143,148,153,158,163,169,174,180,185,191,197,203,209,215,222,228,235,241,248,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 };
+      PROGMEM const uint8_t pwm2_levels[] = { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,4,6,9,11,14,16,19,22,24,27,30,33,36,39,42,45,48,51,54,57,61,64,67,71,74,78,82,85,89,93,96,100,104,108,112,116,121,125,129,133,138,142,147,151,156,160,165,170,175,180,185,190,195,200,205,210,216,221,227,232,238,243,249,255 };
+      #define MAX_1x7135 85
+      #define HALFSPEED_LEVEL 11
+      #define QUARTERSPEED_LEVEL 5
+      #else
+      // ../../bin/level_calc.py 2 150 7135 1 11.2 450 FET 1 10 4000
+      // (with a x**9 curve instead of x**3)
+      // (because it made the ramp look better than accurate values)
+      PROGMEM const uint8_t pwm1_levels[] = { 1,1,2,2,3,3,4,4,5,5,6,6,7,8,8,9,10,10,11,12,13,14,15,16,17,18,19,21,22,23,25,26,27,29,31,32,34,36,38,40,42,44,46,49,51,54,56,59,62,65,68,71,74,78,81,85,89,93,97,101,106,110,115,120,125,130,136,141,147,153,160,166,173,180,187,195,202,210,219,227,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 };
+      PROGMEM const uint8_t pwm2_levels[] = { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,5,7,8,10,11,13,14,16,18,19,21,23,25,27,29,31,34,36,38,41,43,46,48,51,54,57,60,63,66,69,72,76,79,83,87,91,95,99,103,107,112,116,121,126,131,136,141,146,152,158,163,169,175,182,188,195,202,209,216,223,231,239,247,255 };
+      #define MAX_1x7135 83
+      #define HALFSPEED_LEVEL 13
+      #define QUARTERSPEED_LEVEL 6
+      #endif
     #else
       // ../../bin/level_calc.py 2 150 7135 4 0.33 150 FET 1 10 1500
       //PROGMEM const uint8_t pwm1_levels[] = { 4,4,4,5,5,5,6,6,7,7,8,9,10,11,12,13,14,15,17,18,20,21,23,25,27,30,32,34,37,40,43,46,49,52,56,59,63,67,71,76,80,85,90,95,100,106,112,118,124,130,137,144,151,158,166,173,181,190,198,207,216,225,235,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 };