merging gchart's changes, part 1...

+ added Sofirn LT1S Pro
+ added Sofirn SC21 Pro
+ added Wurkkos TS10
+ added Wurkkos TS25
* small changes to other models
* improved dual voltage support
+ added attiny1616 flashing python script w/ pymcuprog

These changes are incomplete.  It does not yet include:
- extended simple UI
- t1616 WDT reset detection
- gchart's OUTPUT_MUX code (I plan to rewrite the entire tint system)

10 files changed, 309 insertions, 0 deletions

diff --git a/spaghetti-monster/anduril/BRANDS b/spaghetti-monster/anduril/BRANDS
index 4e73002..059f311 100644
--- a/spaghetti-monster/anduril/BRANDS
+++ b/spaghetti-monster/anduril/BRANDS
@@ -7,4 +7,5 @@ Lumintop	0300 - 0399
 Fireflies	0400 - 0499
 Mateminco	0500 - 0599
 Sofirn		0600 - 0699
+Wurkkos		0700 - 0799
 gChart		1600 - 1699
diff --git a/spaghetti-monster/anduril/MODELS b/spaghetti-monster/anduril/MODELS
index 3071b60..dfe1190 100644
--- a/spaghetti-monster/anduril/MODELS
+++ b/spaghetti-monster/anduril/MODELS
@@ -59,7 +59,11 @@ Model	Name                          	MCU
 0614	sofirn-sp36-t1616             	attiny1616
 0621	blf-lantern                   	attiny85
 0622	blf-lantern-t1616             	attiny1616
+0623	sofirn-lt1s-pro               	attiny1616
 0631	sofirn-sp10-pro               	attiny1616
+0632	sofirn-sc21-pro               	attiny1616
+0714	wurkkos-ts10                  	attiny1616
+0715	wurkkos-ts25                  	attiny1616
 1618	gchart-fet1-t1616             	attiny1616
 
 Duplicates:
diff --git a/spaghetti-monster/anduril/aux-leds.c b/spaghetti-monster/anduril/aux-leds.c
index a3b905e..bb184f9 100644
--- a/spaghetti-monster/anduril/aux-leds.c
+++ b/spaghetti-monster/anduril/aux-leds.c
@@ -27,14 +27,21 @@
 void indicator_led_update(uint8_t mode, uint8_t tick) {
     //uint8_t volts = voltage;  // save a few bytes by caching volatile value
     // turn off when battery is too low
+    #ifdef DUAL_VOLTAGE_FLOOR
+    if (((voltage < VOLTAGE_LOW) && (voltage > DUAL_VOLTAGE_FLOOR))
+        || (voltage < DUAL_VOLTAGE_LOW_LOW)) {
+    #else
     if (voltage < VOLTAGE_LOW) {
+    #endif
         indicator_led(0);
     }
     //#ifdef USE_INDICATOR_LOW_BAT_WARNING
+    #ifndef DUAL_VOLTAGE_FLOOR // this isn't set up for dual-voltage lights like the Sofirn SP10 Pro
     // fast blink a warning when battery is low but not critical
     else if (voltage < VOLTAGE_RED) {
         indicator_led(mode & (((tick & 0b0010)>>1) - 3));
     }
+    #endif
     //#endif
     // normal steady output, 0/1/2 = off / low / high
     else if ((mode & 0b00001111) < 3) {
@@ -96,7 +103,11 @@ void rgb_led_update(uint8_t mode, uint8_t arg) {
     // turn off aux LEDs when battery is empty
     // (but if voltage==0, that means we just booted and don't know yet)
     uint8_t volts = voltage;  // save a few bytes by caching volatile value
+    #ifdef DUAL_VOLTAGE_FLOOR
+    if ((volts) && (((voltage < VOLTAGE_LOW) && (voltage > DUAL_VOLTAGE_FLOOR)) || (voltage < DUAL_VOLTAGE_LOW_LOW))) {
+    #else
     if ((volts) && (volts < VOLTAGE_LOW)) {
+    #endif
         rgb_led_set(0);
         #ifdef USE_BUTTON_LED
         button_led_set(0);
diff --git a/spaghetti-monster/anduril/cfg-mateminco-mt35-mini.h b/spaghetti-monster/anduril/cfg-mateminco-mt35-mini.h
index c5b40e2..d7264a2 100644
--- a/spaghetti-monster/anduril/cfg-mateminco-mt35-mini.h
+++ b/spaghetti-monster/anduril/cfg-mateminco-mt35-mini.h
@@ -51,4 +51,9 @@
 #define USE_SIMPLE_UI_RAMPING_TOGGLE
 
 // too big, turn off extra features
+//#undef USE_SOS_MODE
+//#undef USE_RAMP_AFTER_MOON_CONFIG
+//#undef USE_RAMP_SPEED_CONFIG
+//#undef USE_VOLTAGE_CORRECTION
+//#undef USE_2C_STYLE_CONFIG
 #undef USE_TACTICAL_MODE
diff --git a/spaghetti-monster/anduril/cfg-sofirn-lt1s-pro.c b/spaghetti-monster/anduril/cfg-sofirn-lt1s-pro.c
new file mode 100644
index 0000000..571bbdc
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-sofirn-lt1s-pro.c
@@ -0,0 +1,22 @@
+// this is inserted into fsm-ramping.c :: set_level()
+// (it overrides part of the function, but not all of it)
+uint8_t output_mux; // pre-define this variable since the overrides file gets included before the ramp-mode.h file
+inline void set_level_override(uint8_t level) {
+    if (level == 0) {  // off
+        TINT1_LVL = 0;  // disable the first white channel
+        TINT2_LVL = 0;  // disable the second white channel
+        PWM3_LVL = 0;   // disable the red LEDs
+    } else {
+        level --;
+
+        if (output_mux == 0) {  // main white LEDs
+            PWM3_LVL = 0;  // disable the red LEDs
+            PWM1_LVL = PWM_GET(pwm1_levels, level);  // get the PWM value
+            update_tint();  // set the warm-cool level balance
+        } else {  // red LEDs
+            TINT1_LVL = 0;  // disable the first white channel
+            TINT2_LVL = 0;  // disable the second white channel
+            PWM3_LVL = PWM_GET(pwm1_levels, level);  // set the red LED PWM
+        }
+    }
+}
\ No newline at end of file
diff --git a/spaghetti-monster/anduril/cfg-sofirn-lt1s-pro.h b/spaghetti-monster/anduril/cfg-sofirn-lt1s-pro.h
new file mode 100644
index 0000000..4e5993b
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-sofirn-lt1s-pro.h
@@ -0,0 +1,90 @@
+// Sofirn LT1S Pro
+#define MODEL_NUMBER "0623"
+#include "hwdef-Sofirn_LT1S-Pro.h"
+// ATTINY: 1616
+// this model requires some special code
+#define OVERRIDES_FILE cfg-sofirn-lt1s-pro.c
+#define OVERRIDE_SET_LEVEL
+inline void set_level_override(uint8_t level);
+
+// uses 4C action while On to switch between white and red channels (overrides lockout action)
+#define USE_OUTPUT_MUX
+
+// the button lights up
+#define USE_INDICATOR_LED
+// the button is visible while main LEDs are on
+#define USE_INDICATOR_LED_WHILE_RAMPING
+// off mode: high (1)
+// lockout: blinking (3)
+#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
+
+// the lantern has two PWM channels, but they drive different sets of emitters
+// (one channel for warm emitters, one channel for cold)
+// so enable a special ramping mode which changes tint instead of brightness
+#define USE_TINT_RAMPING
+// how much to increase total brightness at middle tint
+// (0 = 100% brightness, 64 = 200% brightness)
+#define TINT_RAMPING_CORRECTION 10  // 115%
+
+#ifdef RAMP_LENGTH
+#undef RAMP_LENGTH
+#endif
+
+// level_calc.py 1 150 7135 1 30 800
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,11,11,12,13,13,14,15,15,16,17,18,18,19,20,21,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,43,44,45,46,48,49,50,51,53,54,56,57,58,60,61,63,64,66,67,69,70,72,74,75,77,79,80,82,84,85,87,89,91,93,95,97,98,100,102,104,106,108,111,113,115,117,119,121,124,126,128,130,133,135,137,140,142,145,147,150,152,155,157,160,163,165,168,171,173,176,179,182,185,188,190,193,196,199,202,205,209,212,215,218,221,224,228,231,234,238,241,245,248,251,255
+#define MAX_1x7135 65
+#define HALFSPEED_LEVEL 256 // red LEDs use a QX7138 chip which has max PWM speed of 10 kHz, so never run faster than halfspeed
+#define QUARTERSPEED_LEVEL 5
+
+// the default of 26 looks a bit flat, so increase it
+#define CANDLE_AMPLITUDE 40
+
+// override default ramp style
+#undef RAMP_STYLE
+#define RAMP_STYLE 1  // 0 = smooth, 1 = stepped
+// set floor and ceiling as far apart as possible
+// because this lantern isn't overpowered
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL  150
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 5
+
+// LT1S can handle heat well, so don't limit simple mode
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL  RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_STEPS RAMP_DISCRETE_STEPS
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+// allow Aux Config and Strobe Modes in Simple UI
+#define USE_EXTENDED_SIMPLE_UI
+
+// enable 2 click turbo (Anduril 1 style)
+#define DEFAULT_2C_STYLE 1
+
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// the sensor (attiny) is nowhere near the emitters
+// so thermal regulation can't work
+#ifdef USE_THERMAL_REGULATION
+#undef USE_THERMAL_REGULATION
+#endif
+
+// don't blink while ramping
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+#ifdef BLINK_AT_RAMP_FLOOR
+#undef BLINK_AT_RAMP_FLOOR
+#endif
+#ifdef BLINK_AT_RAMP_CEIL
+#undef BLINK_AT_RAMP_CEIL
+#endif
+
+#ifndef USE_SOFT_FACTORY_RESET
+#define USE_SOFT_FACTORY_RESET
+#endif
\ No newline at end of file
diff --git a/spaghetti-monster/anduril/cfg-sofirn-sc21-pro.h b/spaghetti-monster/anduril/cfg-sofirn-sc21-pro.h
new file mode 100644
index 0000000..cee8172
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-sofirn-sc21-pro.h
@@ -0,0 +1,10 @@
+// Sofirn SC21 Pro - same setup as a Wurkkos TS10, but with the aux indicator on while ramping
+#include "cfg-wurkkos-ts10.h"
+#undef MODEL_NUMBER
+#define MODEL_NUMBER "0632"
+// ATTINY: 1616
+
+// turn on the aux LED while main LED is on
+#ifndef USE_INDICATOR_LED_WHILE_RAMPING
+#define USE_INDICATOR_LED_WHILE_RAMPING
+#endif
diff --git a/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h b/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h
index bcfc80e..c1f1ed8 100644
--- a/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h
+++ b/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h
@@ -3,7 +3,13 @@
 #include "hwdef-Sofirn_SP10-Pro.h"
 // ATTINY: 1616
 
+// don't blink during the ramp or at the ceiling
+#ifdef BLINK_AT_RAMP_MIDDLE
 #undef BLINK_AT_RAMP_MIDDLE
+#endif
+#ifdef BLINK_AT_RAMP_CEIL
+#undef BLINK_AT_RAMP_CEIL
+#endif
 
 #define USE_DYNAMIC_UNDERCLOCKING
 
diff --git a/spaghetti-monster/anduril/cfg-wurkkos-ts10.h b/spaghetti-monster/anduril/cfg-wurkkos-ts10.h
new file mode 100644
index 0000000..6f92abf
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-wurkkos-ts10.h
@@ -0,0 +1,82 @@
+// Wurkkos TS10 (originally used Sofirn SP36-t1616 firmware) config options for Anduril using the Attiny1616
+// same as  the  BLF Q8 T1616, mostly (added Dynamic PWM)
+#define MODEL_NUMBER "0714"
+#include "hwdef-Wurkkos_TS10.h"
+// ATTINY: 1616
+
+// uses forward-facing aux LEDs
+#define USE_INDICATOR_LED
+// don't turn on the aux LEDs while main LEDs are on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+// the high button LED mode on this light uses too much power, default to low
+// off mode: low (1)
+// lockout: blinking (3)
+#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
+
+// voltage readings were a little high with the Q8 value
+#undef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V, not 0.35V
+
+/*
+// copied from Emisar D4 ramp
+// ../../bin/level_calc.py 1 65 7135 1 0.8 150
+// ... mixed with this:
+// ../../bin/level_calc.py 2 150 7135 4 0.33 150 FET 1 10 1500
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,7,8,9,10,12,13,14,15,17,19,20,22,24,26,29,31,34,36,39,42,45,48,51,55,59,62,66,70,75,79,84,89,93,99,104,110,115,121,127,134,140,147,154,161,168,176,184,192,200,209,217,226,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,5,7,8,9,11,12,14,15,17,19,20,22,24,25,27,29,31,33,35,37,39,41,43,45,48,50,52,55,57,59,62,64,67,70,72,75,78,81,84,87,90,93,96,99,102,105,109,112,115,119,122,126,129,133,137,141,144,148,152,156,160,165,169,173,177,182,186,191,195,200,205,209,214,219,224,229,234,239,244,250,255
+#define MAX_1x7135 65
+#define HALFSPEED_LEVEL 14
+#define QUARTERSPEED_LEVEL 5
+*/
+// level 1 by hand, for the rest
+// level_calc.py 7.01 2 149 7135 3 0.5 125 FET 1 10 1200 --pwm dyn:63:2048:255
+#define RAMP_LENGTH 150
+#define USE_DYN_PWM
+#define PWM1_LEVELS 1,3,3,4,5,6,7,8,9,10,12,13,14,16,17,19,20,22,24,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,64,67,70,72,75,77,80,82,85,87,89,91,93,95,96,98,99,100,100,101,100,100,99,97,95,93,90,86,82,87,91,96,100,106,111,116,122,128,134,141,147,155,162,169,177,186,194,203,213,222,232,243,254,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,6,7,9,11,12,14,16,18,20,22,24,27,29,31,34,37,39,42,45,48,51,54,57,61,64,68,72,75,79,83,88,92,97,101,106,111,116,121,126,132,138,144,150,156,162,169,176,183,190,197,205,213,221,229,237,246,255
+#define PWM_TOPS 2047,2047,1198,1322,1584,1676,1701,1691,1662,1622,1774,1703,1631,1692,1613,1639,1558,1564,1559,1478,1464,1444,1420,1392,1361,1329,1331,1293,1256,1246,1207,1192,1152,1133,1094,1074,1035,1013,991,954,932,897,875,842,820,790,760,731,704,678,646,622,593,566,534,510,478,452,423,393,364,338,310,280,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+#define MAX_1x7135 90
+#define HALFSPEED_LEVEL 2
+#define QUARTERSPEED_LEVEL 2
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 120
+// 10 28 46 [65] 83 101 120
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// at Wurkkos's request, reduce the Simple UI ceiling a little bit
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL 144
+#define SIMPLE_UI_STEPS 5
+
+// enable 2 click turbo (Anduril 1 style)
+#define DEFAULT_2C_STYLE 1
+
+// enable SOS in the blinkies group
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+// allow Aux Config and Strobe Modes in Simple UI
+#define USE_EXTENDED_SIMPLE_UI
+
+// enable factory reset on 13H without loosening tailcap
+#define USE_SOFT_FACTORY_RESET
+
+// stop panicking at ~55% power
+#define THERM_FASTER_LEVEL 130  // throttle back faster when high
+
+// don't blink during the ramp or at the ceiling
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+#ifdef BLINK_AT_RAMP_CEIL
+#undef BLINK_AT_RAMP_CEIL
+#endif
\ No newline at end of file
diff --git a/spaghetti-monster/anduril/cfg-wurkkos-ts25.h b/spaghetti-monster/anduril/cfg-wurkkos-ts25.h
new file mode 100644
index 0000000..a339cdb
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-wurkkos-ts25.h
@@ -0,0 +1,78 @@
+// Wurkkos TS25, modelled after the TS10 but with RGB Aux
+#define MODEL_NUMBER "0715"
+#include "hwdef-Wurkkos_TS25.h"
+// ATTINY: 1616
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// don't turn on the aux LEDs while main LEDs are on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+// voltage readings were a little high with the Q8 value
+#undef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V, not 0.35V
+
+/*
+// copied from Emisar D4 ramp
+// ../../bin/level_calc.py 1 65 7135 1 0.8 150
+// ... mixed with this:
+// ../../bin/level_calc.py 2 150 7135 4 0.33 150 FET 1 10 1500
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,7,8,9,10,12,13,14,15,17,19,20,22,24,26,29,31,34,36,39,42,45,48,51,55,59,62,66,70,75,79,84,89,93,99,104,110,115,121,127,134,140,147,154,161,168,176,184,192,200,209,217,226,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,5,7,8,9,11,12,14,15,17,19,20,22,24,25,27,29,31,33,35,37,39,41,43,45,48,50,52,55,57,59,62,64,67,70,72,75,78,81,84,87,90,93,96,99,102,105,109,112,115,119,122,126,129,133,137,141,144,148,152,156,160,165,169,173,177,182,186,191,195,200,205,209,214,219,224,229,234,239,244,250,255
+#define MAX_1x7135 65
+#define HALFSPEED_LEVEL 14
+#define QUARTERSPEED_LEVEL 5
+*/
+// level 1 by hand, for the rest
+// level_calc.py 7.01 2 149 7135 3 0.5 125 FET 1 10 1200 --pwm dyn:63:2048:255
+#define RAMP_LENGTH 150
+#define USE_DYN_PWM
+#define PWM1_LEVELS 1,3,3,4,5,6,7,8,9,10,12,13,14,16,17,19,20,22,24,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,64,67,70,72,75,77,80,82,85,87,89,91,93,95,96,98,99,100,100,101,100,100,99,97,95,93,90,86,82,87,91,96,100,106,111,116,122,128,134,141,147,155,162,169,177,186,194,203,213,222,232,243,254,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,6,7,9,11,12,14,16,18,20,22,24,27,29,31,34,37,39,42,45,48,51,54,57,61,64,68,72,75,79,83,88,92,97,101,106,111,116,121,126,132,138,144,150,156,162,169,176,183,190,197,205,213,221,229,237,246,255
+#define PWM_TOPS 2047,2047,1198,1322,1584,1676,1701,1691,1662,1622,1774,1703,1631,1692,1613,1639,1558,1564,1559,1478,1464,1444,1420,1392,1361,1329,1331,1293,1256,1246,1207,1192,1152,1133,1094,1074,1035,1013,991,954,932,897,875,842,820,790,760,731,704,678,646,622,593,566,534,510,478,452,423,393,364,338,310,280,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+#define MAX_1x7135 90
+#define HALFSPEED_LEVEL 2
+#define QUARTERSPEED_LEVEL 2
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 120
+// 10 28 46 [65] 83 101 120
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// at Wurkkos's request, reduce the Simple UI ceiling a little bit
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL 135
+#define SIMPLE_UI_STEPS 5
+
+// enable 2 click turbo (Anduril 1 style)
+#define DEFAULT_2C_STYLE 1
+
+// enable SOS in the blinkies group
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+// allow Aux Config and Strobe Modes in Simple UI
+#define USE_EXTENDED_SIMPLE_UI
+
+// enable factory reset on 13H without loosening tailcap
+#define USE_SOFT_FACTORY_RESET
+
+// stop panicking at ~55% power
+#define THERM_FASTER_LEVEL 130  // throttle back faster when high
+
+// don't blink during the ramp or at the ceiling
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+#ifdef BLINK_AT_RAMP_CEIL
+#undef BLINK_AT_RAMP_CEIL
+#endif
\ No newline at end of file