added emisar-d4k-3ch build

1 files changed, 106 insertions, 0 deletions

diff --git a/spaghetti-monster/anduril/cfg-emisar-d4k-3ch.h b/spaghetti-monster/anduril/cfg-emisar-d4k-3ch.h
new file mode 100644
index 0000000..46d5796
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-emisar-d4k-3ch.h
@@ -0,0 +1,106 @@
+// Emisar D4K 3-channel config options for Anduril
+// Copyright (C) 2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define MODEL_NUMBER "0151"
+#include "hwdef-emisar-d4k-3ch.h"
+#include "hank-cfg.h"
+// ATTINY: 1634
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// turn on the aux LEDs while main LEDs are on
+// (in case there's a RGB button)
+#define USE_AUX_RGB_LEDS_WHILE_ON  20
+#define USE_INDICATOR_LED_WHILE_RAMPING
+
+// channel modes...
+// CM_MAIN2, CM_LED3, CM_LED4, CM_ALL,
+// CM_BLEND34A, CM_BLEND34B, CM_HSV, CM_AUTO3
+#define DEFAULT_CHANNEL_MODE           CM_MAIN2
+
+#define FACTORY_RESET_WARN_CHANNEL     CM_LED4
+#define FACTORY_RESET_SUCCESS_CHANNEL  CM_MAIN2
+
+#define USE_CONFIG_COLORS
+#define CONFIG_WAITING_CHANNEL         CM_LED3
+#define CONFIG_BLINK_CHANNEL           CM_ALL
+
+// blink numbers on the main LEDs by default (but allow user to change it)
+#define DEFAULT_BLINK_CHANNEL  CM_MAIN2
+
+// LEDs 3 and 4 make a nice police strobe
+#define POLICE_COLOR_STROBE_CH1        CM_LED3
+#define POLICE_COLOR_STROBE_CH2        CM_LED4
+// aux red + aux blue are the correct colors, but are dim
+//#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
+//#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
+
+// how much to increase total brightness at middle tint
+// (0 = 100% brightness, 64 = 200% brightness)
+#define TINT_RAMPING_CORRECTION 0  // none, linear regulator doesn't need it
+
+// main 2 LEDs
+//   output: unknown, 2000 lm?
+// LED 3 / 4
+//   output: unknown, 1000 lm each?
+#define RAMP_SIZE 150
+// level_calc.py 5.01 1 150 7135 1 0.2 2000 --pwm dyn:69:16383:511
+// 8-bit PWM
+#define PWM1_LEVELS 0,1,1,2,2,2,2,3,3,3,3,4,4,5,5,6,6,6,7,8,8,9,9,10,10,11,12,13,13,14,15,16,16,17,18,19,20,21,22,23,23,24,26,27,28,29,30,31,32,33,34,36,37,38,39,41,42,43,45,46,47,49,50,52,53,55,56,58,59,61,62,64,66,67,69,71,72,74,76,78,80,81,83,85,87,89,91,93,95,97,99,101,103,105,107,109,111,113,116,118,120,122,125,127,129,132,134,136,139,141,144,146,148,151,154,156,159,161,164,166,169,172,174,177,180,183,185,188,191,194,197,200,203,205,208,211,214,217,220,223,226,230,233,236,239,242,245,249,252,255
+// dynamic PWM
+#define PWM2_LEVELS 0,1,1,2,2,2,3,4,4,5,6,6,7,8,9,10,11,13,14,15,17,18,20,21,23,25,27,29,31,33,35,38,40,42,45,47,50,52,55,57,60,62,65,67,70,72,74,76,78,79,81,82,83,84,84,85,84,84,82,81,78,76,72,68,63,58,51,44,35,26,27,29,30,32,33,35,37,38,40,42,44,46,48,50,53,55,57,60,63,65,68,71,74,77,80,83,87,90,94,98,102,106,110,114,118,123,128,132,137,142,148,153,159,164,170,176,183,189,196,202,209,216,224,231,239,247,255,263,272,281,290,299,309,318,328,339,349,360,371,382,394,406,418,430,443,456,469,483,497,511
+#define PWM_TOPS 16383,13662,10727,15413,11905,8157,12776,14730,12250,13437,13990,11928,12275,12360,12270,12060,11765,12450,11970,11470,11698,11138,11181,10600,10534,10404,10226,10014,9776,9519,9248,9220,8919,8617,8512,8203,8066,7760,7605,7308,7144,6860,6693,6426,6260,6009,5769,5539,5320,5046,4851,4607,4378,4163,3914,3727,3468,3268,3008,2803,2548,2345,2099,1874,1642,1430,1189,970,728,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511
+#define MIN_THERM_STEPDOWN 70  // should be above highest dyn_pwm level
+#define DEFAULT_LEVEL 70
+#define MAX_1x7135 70
+#define HALFSPEED_LEVEL 10
+#define QUARTERSPEED_LEVEL 4
+
+//#define DEFAULT_MANUAL_MEMORY        DEFAULT_LEVEL
+//#define DEFAULT_MANUAL_MEMORY_TIMER  10
+
+#define RAMP_SMOOTH_FLOOR 10
+#define RAMP_SMOOTH_CEIL  130
+// 10, 30, 50, [70], 90, 110, [130]
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// safe limit highest regulated power (no FET or turbo)
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_STEPS 5
+
+// stop panicking at ~1500 lm
+#define THERM_FASTER_LEVEL 130
+
+#define USE_POLICE_COLOR_STROBE_MODE
+#undef  TACTICAL_LEVELS
+#define TACTICAL_LEVELS 120,30,(RAMP_SIZE+3)  // high, low, police strobe
+
+// use the brightest setting for strobe
+#define STROBE_BRIGHTNESS MAX_LEVEL
+// slow down party strobe; this driver can't pulse for 1ms or less
+#define PARTY_STROBE_ONTIME 2
+
+// the default of 26 looks a bit flat, so increase it
+#define CANDLE_AMPLITUDE 33
+
+// the power regulator is a bit slow, so push it harder for a quick response from off
+#define DEFAULT_JUMP_START_LEVEL 21
+#define BLINK_BRIGHTNESS 50
+#define BLINK_ONCE_TIME 12  // longer blink, since main LEDs are slow
+
+#define THERM_CAL_OFFSET 5
+
+// don't blink while ramping
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// for consistency with KR4 (not otherwise necessary though)
+#define USE_SOFT_FACTORY_RESET
+