imported cfg and hwdef files for lume1

1 files changed, 106 insertions, 0 deletions

diff --git a/spaghetti-monster/anduril/cfg-fw3x-lume1.h b/spaghetti-monster/anduril/cfg-fw3x-lume1.h
new file mode 100644
index 0000000..27f652a
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-fw3x-lume1.h
@@ -0,0 +1,106 @@
+/* lume1 for FW3x config options for Anduril
+ * Constant current Buck-Boost + FET driver
+ * For more information: www.loneoceans.com/labs/
+ * Datasheets:
+ * - 1634: http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8303-8-bit-AVR-Microcontroller-tinyAVR-ATtiny1634_Datasheet.pdf
+ * - 85: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2586-AVR-8-bit-Microcontroller-ATtiny25-ATtiny45-ATtiny85_Datasheet.pdf
+ * - Manual: https://bazaar.launchpad.net/~toykeeper/flashlight-firmware/fsm/view/head:/ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt
+ * - Notigon K1 Repo: https://code.launchpad.net/~toykeeper/flashlight-firmware/noctigon-k1
+ */
+
+#include "hwdef-lume1-fw3x-revb.h"
+// ATTINY: 1634
+
+// NOTES: modified fsm-ramping.c (line 80) adding if block to turn off BuckBoost EN pin during FET Turbo
+//        Lume1 driver is a 10-bit Constant Current Buck Boost level, + FET for Turbo
+//        FET is not used for regular ramping, only turned on during TURBO
+//       - Same for line 161 in fsm-ramping.c
+// NOTES: modifed fsm-adc.c (line 33 & 289) changing reading to external adc
+
+// set this light for 50C thermal ceiling
+#undef DEFAULT_THERM_CEIL
+#define DEFAULT_THERM_CEIL 50
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// it has no independent LED in the button unlike emisar d4
+//#define USE_BUTTON_LED
+
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+// TODO: the whole "indicator LED" thing needs to be refactored into
+//       "aux LED(s)" and "button LED(s)" since they work a bit differently
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+#define RGB_LED_OFF_DEFAULT 0x18  // low, voltage
+#define RGB_LED_LOCKOUT_DEFAULT 0x37  // blinking, rainbow
+
+// enable blinking aux LEDs
+#define TICK_DURING_STANDBY
+#define STANDBY_TICK_SPEED 3  // every 0.128 s
+//#define STANDBY_TICK_SPEED 4  // every 0.256 s
+//#define STANDBY_TICK_SPEED 5  // every 0.512 s
+
+// ../../bin/level_calc.py cube 1 149 7135 0 0.5 1000, with 0 appended to the end.
+// for FET PWM (PWM2), all values are 0, except for last value of 1023
+// (with max_pwm set to 1023)
+#define RAMP_LENGTH 150
+//#define PWM1_LEVELS 0,0,0,0,1,1,1,1,2,2,2,3,3,4,4,5,5,6,7,7,8,9,10,11,12,13,14,15,16,17,19,20,22,23,25,26,28,30,32,34,36,38,40,42,45,47,49,52,55,58,60,63,66,70,73,76,80,83,87,91,94,98,102,107,111,115,120,124,129,134,139,144,150,155,160,166,172,178,184,190,196,203,209,216,223,230,237,244,252,259,267,275,283,291,299,308,316,325,334,343,353,362,372,382,392,402,412,423,433,444,455,466,478,489,501,513,525,538,550,563,576,589,602,616,630,644,658,672,687,701,716,731,747,762,778,794,810,827,844,861,878,895,913,930,948,967,985,1004,1023,0
+#define PWM1_LEVELS 1,1,1,1,2,2,2,2,3,3,3,4,4,5,5,6,6,7,8,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,33,35,37,39,41,43,45,48,50,53,56,58,61,64,67,70,74,77,80,84,88,91,95,99,103,108,112,116,121,125,130,135,140,145,150,156,161,167,173,178,184,191,197,203,210,217,223,230,238,245,252,260,268,275,283,292,300,308,317,326,335,344,353,363,372,382,392,402,413,423,434,445,456,467,478,490,502,514,526,538,551,563,576,589,603,616,630,644,658,672,687,702,717,732,747,763,778,794,811,827,844,861,878,895,913,931,949,967,985,1004,1023,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1023
+// TODO CHECK WHAT THESE DO
+#define MAX_1x7135 50	
+#define HALFSPEED_LEVEL 14
+#define QUARTERSPEED_LEVEL 5
+
+// the entire ramp is regulated; don't blink halfway up
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// don't slow down at low levels; this isn't that sort of light
+// (it needs to stay at full speed for the 10-bit PWM to work)
+#ifdef USE_DYNAMIC_UNDERCLOCKING
+#undef USE_DYNAMIC_UNDERCLOCKING
+#endif
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 149	// Level 150 is when BuckBoost is off and FET is ON 100%
+// 10, 30, [50], 70, 90, 110, 130
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// Muggle mode: Goal from about ~10 lumens to about ~300+ lumens
+// In this case, ramp number 99 is about 1A to the driver
+#define MUGGLE_FLOOR RAMP_DISCRETE_FLOOR
+#define MUGGLE_CEILING 99
+
+// optional, makes initial turbo step-down faster so first peak isn't as hot
+// FET mode can run very very hot, so be extra careful
+//#define THERM_HARD_TURBO_DROP
+
+// stop panicking at ~70% power or ~700 lm (not sure of this numbers yet)
+#define THERM_FASTER_LEVEL 120
+
+// respond to thermal changes faster
+#define THERMAL_WARNING_SECONDS 3
+#define THERMAL_UPDATE_SPEED 1
+#define THERM_PREDICTION_STRENGTH 4
+//#define THERM_RESPONSE_MAGNITUDE 128
+
+// easier access to thermal config mode, similar to Emisar, Noctigon
+#define USE_TENCLICK_THERMAL_CONFIG
+
+// slow down party strobe; this driver can't pulse for too short a time
+#define PARTY_STROBE_ONTIME 4
+
+//#define THERM_CAL_OFFSET 0	// was 5 from Noctigon
+
+// attiny1634 has enough space to smooth out voltage readings
+#define USE_VOLTAGE_LOWPASS
+
+// can't reset the normal way because power is connected before the button
+// no support for this yet for ATtiny1634 due to lack of WDTCR register in 1634 
+//#define USE_SOFT_FACTORY_RESET
\ No newline at end of file