diff options
| author | Selene ToyKeeper | 2019-07-30 16:00:57 -0600 |
|---|---|---|
| committer | Selene ToyKeeper | 2019-07-30 16:00:57 -0600 |
| commit | 9fdb43496a1d2b54ab5c4f030d480d8f69d7529c (patch) | |
| tree | 781bea6a302549c23ce43892daae727242441221 /spaghetti-monster | |
| parent | anduril: made it possible for config files to disable underclocking at low le... (diff) | |
| download | anduril-9fdb43496a1d2b54ab5c4f030d480d8f69d7529c.tar.gz anduril-9fdb43496a1d2b54ab5c4f030d480d8f69d7529c.tar.bz2 anduril-9fdb43496a1d2b54ab5c4f030d480d8f69d7529c.zip | |
added an early version of Emisar D1S v2 hwdef and cfg files
(it compiles, but most likely doesn't actually work because it's far from finished)
Diffstat (limited to 'spaghetti-monster')
| -rw-r--r-- | spaghetti-monster/anduril/cfg-emisar-d1sv2.h | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/cfg-emisar-d1sv2.h b/spaghetti-monster/anduril/cfg-emisar-d1sv2.h new file mode 100644 index 0000000..45424b3 --- /dev/null +++ b/spaghetti-monster/anduril/cfg-emisar-d1sv2.h @@ -0,0 +1,51 @@ +// Emisar D1S v2 config options for Anduril +#include "hwdef-Emisar_D1Sv2.h" +// ATTINY: 1634 + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS +#define USE_AUX_RGB_LEDS_WHILE_RAMPING + +// enable blinking aux LEDs +#define TICK_DURING_STANDBY +#define STANDBY_TICK_SPEED 3 // every 0.128 s + + +// ../../bin/level_calc.py cube 1 150 7135 1 4 1300 +// (with max_pwm set to 1023) +#define RAMP_LENGTH 150 +#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,32,34,36,38,40,43,45,47,49,52,54,57,60,62,65,68,71,74,77,81,84,87,91,95,98,102,106,110,114,118,122,127,131,136,141,145,150,155,160,166,171,176,182,188,193,199,205,211,218,224,231,237,244,251,258,265,272,280,287,295,303,310,319,327,335,344,352,361,370,379,388,397,407,416,426,436,446,457,467,477,488,499,510,521,533,544,556,568,580,592,604,617,629,642,655,668,682,695,709,723,737,751,766,781,795,810,826,841,857,872,888,904,921,937,954,971,988,1005,1023 +#define MAX_1x7135 65 + +// the entire ramp is regulated; don't blink halfway up +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +// don't slow down at low levels; this isn't that sort of light +// (it needs to stay at full speed for the 10-bit PWM to work) +#ifdef USE_DYNAMIC_UNDERCLOCKING +#undef USE_DYNAMIC_UNDERCLOCKING +#endif + +#define RAMP_SMOOTH_FLOOR 1 +#define RAMP_SMOOTH_CEIL 130 +#define RAMP_DISCRETE_FLOOR 20 +#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL +#define RAMP_DISCRETE_STEPS 7 + +// optional, makes initial turbo step-down faster so first peak isn't as hot +// the D4 runs very very hot, so be extra careful +//#define THERM_HARD_TURBO_DROP + +// stop panicking at ~70% power or ~900 lm +#define THERM_FASTER_LEVEL 130 +// respond to thermal changes faster +#define THERMAL_WARNING_SECONDS 3 +#define THERMAL_UPDATE_SPEED 1 +#define THERM_PREDICTION_STRENGTH 4 + +// easier access to thermal config mode, for Emisar +#define USE_TENCLICK_THERMAL_CONFIG + +#define THERM_CAL_OFFSET 5 |