added dynamic PWM and FET to MD11

1 files changed, 25 insertions, 14 deletions

diff --git a/spaghetti-monster/anduril/cfg-noctigon-md11.h b/spaghetti-monster/anduril/cfg-noctigon-md11.h
index ba72607..ea768af 100644
--- a/spaghetti-monster/anduril/cfg-noctigon-md11.h
+++ b/spaghetti-monster/anduril/cfg-noctigon-md11.h
@@ -14,25 +14,28 @@
 #endif
 
 
-// ../../bin/level_calc.py cube 1 150 7135 1 4 1300
-// (with max_pwm set to 1023)
-// (level 0 flickers and isn't relevant on a thrower, so it's omitted)
+// power channels:
+// - linear: 5A?
+// - FET: DD
 #define RAMP_LENGTH 150
-#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,32,34,36,38,40,43,45,47,49,52,54,57,60,62,65,68,71,74,77,81,84,87,91,95,98,102,106,110,114,118,122,127,131,136,141,145,150,155,160,166,171,176,182,188,193,199,205,211,218,224,231,237,244,251,258,265,272,280,287,295,303,310,319,327,335,344,352,361,370,379,388,397,407,416,426,436,446,457,467,477,488,499,510,521,533,544,556,568,580,592,604,617,629,642,655,668,682,695,709,723,737,751,766,781,795,810,826,841,857,872,888,904,921,937,954,971,988,1005,1023
-#define MAX_1x7135 50
+#define USE_DYN_PWM
+// maxreg at 130, dynamic PWM: level_calc.py 5.01 2 149 7135 1 0.3 1740 FET 1 10 3190 --pwm dyn:64:16384:255
+// (plus one extra level at the beginning for moon)
+#define PWM1_LEVELS 0,1,1,2,2,3,4,5,6,7,8,9,11,12,14,16,17,19,22,24,26,29,31,34,37,40,43,46,49,53,56,60,63,67,71,74,78,82,86,89,93,96,99,103,105,108,110,112,114,115,116,116,115,114,112,109,106,101,95,89,81,71,60,48,34,19,20,21,22,23,24,26,27,28,30,31,32,34,36,37,39,41,43,45,47,49,51,53,56,58,61,63,66,69,72,75,78,81,84,88,91,95,99,103,107,111,115,119,124,129,133,138,143,149,154,159,165,171,177,183,189,196,203,210,217,224,231,239,247,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9,20,30,41,52,63,75,87,99,112,125,138,151,165,179,194,208,224,239,255
+#define PWM_TOPS 16383,16383,11750,14690,9183,12439,13615,13955,13877,13560,13093,12529,13291,12513,12756,12769,11893,11747,12085,11725,11329,11316,10851,10713,10518,10282,10016,9729,9428,9298,8971,8794,8459,8257,8043,7715,7497,7275,7052,6753,6538,6260,5994,5798,5501,5271,5006,4758,4525,4268,4030,3775,3508,3263,3010,2752,2517,2256,1998,1763,1512,1249,994,749,497,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
 
-// the entire ramp is regulated; don't blink halfway up
+#define MAX_1x7135 130
+#define DEFAULT_LEVEL 50
+#define HALFSPEED_LEVEL 12
+#define QUARTERSPEED_LEVEL 4
+
+// don't blink halfway up
 #ifdef BLINK_AT_RAMP_MIDDLE
 #undef BLINK_AT_RAMP_MIDDLE
 #endif
 
-// don't slow down at low levels; this isn't that sort of light
-// (it needs to stay at full speed for the 10-bit PWM to work)
-#ifdef USE_DYNAMIC_UNDERCLOCKING
-#undef USE_DYNAMIC_UNDERCLOCKING
-#endif
-
-#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_FLOOR 10  // low levels may be unreliable
 #define RAMP_SMOOTH_CEIL  130
 // 10, 30, [50], 70, 90, 110, 130
 #define RAMP_DISCRETE_FLOOR 10
@@ -54,7 +57,15 @@
 //#define THERM_NEXT_WARNING_THRESHOLD 32  // more error tolerance before adjusting
 
 // slow down party strobe; this driver can't pulse for 1ms or less
-#define PARTY_STROBE_ONTIME 2
+// (only needed on no-FET build)
+//#define PARTY_STROBE_ONTIME 2
 
 #define THERM_CAL_OFFSET 5
 
+// the power regulator is a bit slow, so push it harder for a quick response from off
+#define DEFAULT_JUMP_START_LEVEL 21
+//#define BLINK_BRIGHTNESS DEFAULT_LEVEL
+//#define BLINK_ONCE_TIME 12
+
+// can't reset the normal way because power is connected before the button
+#define USE_SOFT_FACTORY_RESET