diff options
Diffstat (limited to '')
| -rw-r--r-- | docs/anduril-manual.md | 96 |
1 files changed, 52 insertions, 44 deletions
diff --git a/docs/anduril-manual.md b/docs/anduril-manual.md index 68c577c..b40b454 100644 --- a/docs/anduril-manual.md +++ b/docs/anduril-manual.md @@ -30,6 +30,7 @@ more modes and features available for people who want more. For a full list of button mappings, scroll down to the [UI Reference Table](#ui-reference-table) at the end of this file. +If you have a specific question, it may be covered in the [FAQ](#faq). Button presses -------------- @@ -105,15 +106,15 @@ Functions available in Simple UI include: - `2H`: If light is on : ramp down If light is off: momentary high mode - `2C`: Double click to go to / from highest safe level - - `4C`: Lockout mode. + - `4C`: [Lockout mode](#lockout-mode). Some other modes and functions are available too. When the light is off, these are the options: - - `3C`: Battery check mode. (displays voltage once, then turns off) - - `4C`: Lockout mode. - - `10H`: Switch to Advanced UI. - - `15C` or more: Version check. + - `3C`: [Battery check mode](#battery-check). (displays voltage once, then turns off) + - `4C`: [Lockout mode](#lockout-mode). + - `10H`: Switch to [Advanced UI](#advanced-ui). + - `15C` or more: [Version check](#version-check-mode). In Lockout mode with Simple UI, there are a few functions: @@ -129,7 +130,7 @@ do one of these: In Simple UI: - - `10H`: Go to Advanced UI. + - `10H`: Go to [Advanced UI](#advanced-ui). In Advanced UI: @@ -140,11 +141,11 @@ do one of these: Some lights have additional features enabled in Simple UI, at the manufacturer's request. This typically includes: - - `Ramp -> 3C`: Toggle smooth or stepped ramp shape. - - `Ramp -> 5H`: Sunset timer. - - `Off -> 3H`: Access the strobe/mood modes. - - `Off -> 7C/7H`: Change the aux LED pattern. - - `Lockout -> 7C/7H`: Change the aux LED pattern. + - `Ramp -> 3C`: Toggle smooth or stepped [ramp shape](#ramping--stepped-ramping-modes). + - `Ramp -> 5H`: [Sunset timer](#sunset-timer). + - `Off -> 3H`: Access the [strobe/mood modes](#strobe--mood-modes). + - `Off -> 7C/7H`: Change the [aux LED brightness](#aux-leds--button-leds). + - `Lockout -> 7C/7H`: Change the [aux LED pattern](#aux-leds--button-leds). If your light uses Extended Simple UI, *think twice about letting kids use it*, because the strobe/mood modes were not intended to be used in simple mode, and @@ -160,7 +161,7 @@ Simple UI can be configured in several ways, but not while Simple UI is active. So go to the Advanced UI, configure things, then go back to Simple UI. -In Advanced UI's "Off" mode: +In [Advanced UI](#advanced-ui)'s "Off" mode: - `10H`: Configure Simple UI. @@ -191,6 +192,8 @@ Advanced UI Most of the information below this is for the Advanced UI. Anything not already noted above is blocked in the Simple UI. +To return to Simple UI from advanced UI, enter 10C while the light is off. + Ramping / Stepped Ramping Modes ------------------------------- @@ -230,21 +233,20 @@ While the light is on, a few actions are available: at the ceiling, it goes down instead. - `2H`: Change brightness (down). - - `3C`: Switch to the other ramp style. (smooth / stepped) - (or activate the next channel mode, when more than one is enabled) + - `3C`: Switch to the other [ramp style](#ramping--stepped-ramping-modes). (smooth / stepped) + (or activate the next [channel mode](#channel-modes-aka-tint-ramping-or-multi-channel-controls), when more than one is enabled) (then use 6C instead, for smooth / stepped toggle) - `6C`: Switch to the other ramp style. (when `3C` is mapped to next channel) - `3H`: Momentary turbo (when current channel has no tint to ramp). - - `3H`: Tint ramping (only when current channel has adjustable tint). + - `3H`: [Tint ramping](#channel-modes-aka-tint-ramping-or-multi-channel-controls) (only when current channel has adjustable tint). - `4H`: Momentary turbo, when `3H` is mapped to tint. - - `4C`: Go to lockout mode. - - - `5C`: Go to momentary mode. - - `5H`: Start a sunset timer. Details are below in the Sunset Timer section. + - `4C`: Go to [lockout mode](#lockout-mode). - - `7H`: Ramp config menu. + - `5C`: Go to [momentary mode](#momentary-mode). + - `5H`: Start a [sunset timer](#sunset-timer). + - `7H`: [Ramp config menu](#ramp-config-menu). - Item 1: Floor level. - Item 2: Ceiling level. - Item 3: @@ -256,6 +258,7 @@ While the light is on, a few actions are available: 4 = Quarter speed, ~10s. - `10C`: Activate manual memory and save the current brightness. +<a name="ramp-extras-config-menu"> - `10H`: Ramp extras config menu. - Item 1: Disable manual memory and go back to automatic memory. (doesn't matter what value the user enters at the prompt) @@ -337,16 +340,16 @@ Other Modes Anduril has several other modes too. To access these, press the button more than 2 times when the light is off: - - `3C`: Blinky / utility modes, starting with battery check. - - `3H`: Strobe modes, starting with the most recently used strobe. - - `4C`: Lockout mode. - - `5C`: Momentary mode. - - `6C`: Tactical mode. - - `7C` / `7H`: Aux LED configuration. - - `9H`: Misc Config menu. (only on some lights) - - `10H`: Simple UI configuration menu. - - `13H`: Factory reset (on some lights). - - `15C` or more: Version check. + - `3C`: [Blinky / utility modes](#blinky--utility-modes), starting with battery check. + - `3H`: [Strobe modes](#strobe--mood-modes), starting with the most recently used strobe. + - `4C`: [Lockout mode](#lockout-mode). + - `5C`: [Momentary mode](#momentary-mode). + - `6C`: [Tactical mode](#tactical-mode). + - `7C` / `7H`: [Aux LED configuration](#aux-leds--button-leds). + - `9H`: [Misc Config menu](#misc-config-menu). (only on some lights) + - `10H`: [Simple UI](#simple-ui) configuration menu. + - `13H`: [Factory reset](#factory-reset) (on some lights). + - `15C` or more: [Version check](#version-check-mode). Lockout Mode @@ -379,7 +382,7 @@ lockout mode has two levels: (or the manual mem level, if there is one) - `3H`: Next channel mode (if more than one is enabled). - +<a name="autolock-config"> It is also possible to make the light lock itself automatically after being turned off. To enable this, go to lockout mode and use a `10H` action to activate the auto-lock config menu. Release the button after @@ -390,11 +393,9 @@ timeout to N minutes. A value of zero disables the auto-lock feature. So, to turn off auto-lock, don't click at all. -And on lights which have aux LEDs, there may be additional functions: - - - `7C` / `7H`: Change Lockout Mode's aux LED pattern. More details on - this below, in a separate section. +On lights which have aux LEDs, there may be additional functions: + - `7C` / `7H`: Change Lockout Mode's [aux LED pattern](#aux-leds--button-leds). Blinky / Utility Modes ---------------------- @@ -403,10 +404,10 @@ Click 3 times from Off to access Anduril's blinky / utility modes. This always starts at battery check and the user can proceed to other blinky modes if Advanced UI is enabled. The sequence is: - - Battery check. - - Temperature check (if light has a temperature sensor). - - Beacon mode. - - SOS mode (if enabled). + - [Battery check](#battery-check). + - [Temperature check](#temperature-check) (if light has a temperature sensor). + - [Beacon mode](#beacon-mode). + - [SOS mode](#sos-mode) (if enabled). In all of these modes, some basic actions are available: @@ -526,12 +527,12 @@ In all of these modes, a few actions are available: - `1H`: Increase brightness, or strobe faster. (except lightning) - `2H`: Decrease brightness, or strobe slower. (except lightning) - `4C`: Previous strobe / mood mode. - - `5C`: Go to momentary mode, for a momentary strobe. + - `5C`: Go to [momentary mode](#momentary-mode), for a momentary strobe. (this is useful for light painting) Additionally, candle mode has one more action: - - `5H`: Activate Sunset Timer, and/or add 5 minutes to the timer. + - `5H`: Activate [Sunset Timer](#sunset-timer), and/or add 5 minutes to the timer. In more detail, here is what each mode does: @@ -784,7 +785,7 @@ several formats: If the version doesn't include a model number, you may be able to find the model in the PRODUCTS file to see which firmware model it probably uses: - https://bazaar.launchpad.net/~toykeeper/flashlight-firmware/anduril2/view/head:/PRODUCTS + https://github.com/ToyKeeper/anduril/blob/trunk/MODELS Protection Features @@ -942,7 +943,7 @@ smooth or stepped brightness ramp. Additionally, when a channel mode has nothing to adjust with `3H`, the `3H` action also reverts to its single-channel behavior -- momentary turbo. -The Misc Config Menu (`Off -> 9H`) may also have a setting to choose a +The [Misc Config Menu](#misc-config-menu) (`Off -> 9H`) may also have a setting to choose a tint ramp style. There are a few styles available, by entering different numbers into that config menu: @@ -955,7 +956,14 @@ This setting only applies to modes with channel ramping (i.e. tint ramping), and only when that mode uses the default `3H` event handler. Custom channel modes may work differently. - +FAQ +--- +* Q: Why do the aux LEDs come on whenever I switch the light off, regardless +of aux settings? +* A: This is the post-off voltage display feature. It can be configured or +disabled under [battery check](#battery-check) mode. +* Q: What can I do to contribute to Anduril development? +* A: See [Contributing](https://github.com/ToyKeeper/anduril#contributing). UI Reference Table ------------------ |