diff options
Diffstat (limited to '')
| -rw-r--r-- | hwdef-Noctigon_K1-12V.h | 8 | ||||
| -rw-r--r-- | spaghetti-monster/fsm-ramping.c | 6 |
2 files changed, 12 insertions, 2 deletions
diff --git a/hwdef-Noctigon_K1-12V.h b/hwdef-Noctigon_K1-12V.h index f34b768..2294bac 100644 --- a/hwdef-Noctigon_K1-12V.h +++ b/hwdef-Noctigon_K1-12V.h @@ -19,7 +19,7 @@ * 12 PC3 RESET * 13 PC2 (none) * 14 PC1 SCK - * 15 PC0 (none) PWM0A + * 15 PC0 boost PMIC enable (PWM0A not used) * 16 PB3 main LED PWM (PWM1A) * 17 PB2 MISO * 18 PB1 MOSI / battery voltage (ADC6) @@ -56,6 +56,9 @@ #define LED_ENABLE_PIN PB0 // pin 19, Opamp power #define LED_ENABLE_PORT PORTB // control port for PB0 +#define LED_ENABLE2_PIN PC0 // pin 15, boost PMIC enable +#define LED_ENABLE2_PORT PORTC // control port for PC0 + #define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened #define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6 @@ -101,6 +104,8 @@ // ... so just hardcode it in each hwdef file instead inline void hwdef_setup() { // enable output ports + // boost PMIC on/off + DDRC = (1 << LED_ENABLE2_PIN); // Opamp level and Opamp on/off DDRB = (1 << PWM1_PIN) | (1 << LED_ENABLE_PIN); @@ -126,7 +131,6 @@ inline void hwdef_setup() { ; // set up e-switch - //PORTA = (1 << SWITCH_PIN); // TODO: configure PORTA / PORTB / PORTC? PUEA = (1 << SWITCH_PIN); // pull-up for e-switch SWITCH_PCMSK = (1 << SWITCH_PCINT); // enable pin change interrupt } diff --git a/spaghetti-monster/fsm-ramping.c b/spaghetti-monster/fsm-ramping.c index 20500cc..bae601e 100644 --- a/spaghetti-monster/fsm-ramping.c +++ b/spaghetti-monster/fsm-ramping.c @@ -72,6 +72,9 @@ void set_level(uint8_t level) { #ifdef LED_ENABLE_PIN LED_ENABLE_PORT &= ~(1 << LED_ENABLE_PIN); #endif + #ifdef LED_ENABLE2_PIN + LED_ENABLE2_PORT &= ~(1 << LED_ENABLE2_PIN); + #endif } else { level --; @@ -79,6 +82,9 @@ void set_level(uint8_t level) { #ifdef LED_ENABLE_PIN LED_ENABLE_PORT |= (1 << LED_ENABLE_PIN); #endif + #ifdef LED_ENABLE2_PIN + LED_ENABLE2_PORT |= (1 << LED_ENABLE2_PIN); + #endif #ifdef USE_TINT_RAMPING #ifndef TINT_RAMPING_CORRECTION |