2 files changed, 10 insertions, 11 deletions
diff --git a/hw/wurkkos/ts25/boost/anduril.h b/hw/wurkkos/ts25/boost/anduril.h
index f1c6868..c4541d4 100644
--- a/hw/wurkkos/ts25/boost/anduril.h
+++ b/hw/wurkkos/ts25/boost/anduril.h
@@ -10,16 +10,15 @@
 #define USE_AUX_RGB_LEDS
 
 // don't turn on the aux LEDs while main LEDs are on
-//#ifdef USE_INDICATOR_LED_WHILE_RAMPING
-//#undef USE_INDICATOR_LED_WHILE_RAMPING
-//#endif
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+// (nope, 20250210 prototype has front aux instead of RGB button)
 // show real-time battery status on RGB button
 // when main LEDs are bright enough to overpower the front aux
-#define USE_INDICATOR_LED_WHILE_RAMPING
-#define USE_AUX_RGB_LEDS_WHILE_ON  20
-
+//#define USE_INDICATOR_LED_WHILE_RAMPING
+//#define USE_AUX_RGB_LEDS_WHILE_ON  20
 
-#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V, not 0.35V
 
 #define RAMP_SIZE 150
 
@@ -64,8 +63,8 @@
 // blink numbers on the aux LEDs by default
 //#define DEFAULT_BLINK_CHANNEL  CM_AUXWHT
 
-// slow down party strobe; this driver can't pulse for 2ms or less
-#define PARTY_STROBE_ONTIME 1
+// slow down party strobe; this driver can't pulse for less than 2ms
+#define PARTY_STROBE_ONTIME 2
 //#define STROBE_OFF_LEVEL 1  // keep the regulator chip on between pulses
 
 // use aux red + aux blue for police strobe
diff --git a/hw/wurkkos/ts25/boost/hwdef.h b/hw/wurkkos/ts25/boost/hwdef.h
index 833c9f9..d645ded 100644
--- a/hw/wurkkos/ts25/boost/hwdef.h
+++ b/hw/wurkkos/ts25/boost/hwdef.h
@@ -100,8 +100,8 @@ uint8_t ch1_pwm, ch1_dsm;
 // estimated / calculated values are:
 //   (voltage - D1) * (R2/(R2+R1) * 4096 / 1.1)
 // Resistors are 330k and 100k
-#define ADC_44  3830  // raw value at 4.40V
-#define ADC_22  1840  // raw value at 2.20V
+#define ADC_44  4095  // raw value at 4.40V
+#define ADC_22  2048  // raw value at 2.20V
 
 // this light has aux LEDs under the optic
 #define AUXLED_R_PIN    PIN3_bp    // pin 3