diff options
Diffstat (limited to '')
| -rw-r--r-- | hwdef-Mateminco_MF01S.h | 60 | ||||
| -rw-r--r-- | spaghetti-monster/anduril/cfg-mateminco-mf01s.h | 45 |
2 files changed, 105 insertions, 0 deletions
diff --git a/hwdef-Mateminco_MF01S.h b/hwdef-Mateminco_MF01S.h new file mode 100644 index 0000000..ab1c5bf --- /dev/null +++ b/hwdef-Mateminco_MF01S.h @@ -0,0 +1,60 @@ +#ifndef HWDEF_MF01S_H +#define HWDEF_MF01S_H + +/* MF01S driver layout + * ---- + * Reset -|1 8|- VCC (unused) + * eswitch -|2 7|- Voltage divider (2S) + * AUX LED -|3 6|- PWM (FET) + * GND -|4 5|- PWM (smaller FET) + * ---- + */ + +#define PWM_CHANNELS 2 + +#ifndef AUXLED_PIN +#define AUXLED_PIN PB4 // pin 3 +#endif + +#ifndef SWITCH_PIN +#define SWITCH_PIN PB3 // pin 2 +#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt +#endif + +#ifndef PWM1_PIN +#define PWM1_PIN PB0 // pin 5, 1x7135 PWM +#define PWM1_LVL OCR0A // OCR0A is the output compare register for PB0 +#endif +#ifndef PWM2_PIN +#define PWM2_PIN PB1 // pin 6, FET PWM +#define PWM2_LVL OCR0B // OCR0B is the output compare register for PB1 +#endif + +#define USE_VOLTAGE_DIVIDER // use a voltage divider on pin 7, not VCC +#ifndef VOLTAGE_PIN +#define VOLTAGE_PIN PB2 // pin 7, voltage ADC +#define VOLTAGE_CHANNEL 0x01 // MUX 01 corresponds with PB2 +#define VOLTAGE_ADC_DIDR ADC1D // Digital input disable bit corresponding with PB2 +// 1.1V reference, left-adjust, ADC1/PB2 +//#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | (1 << ADLAR) | VOLTAGE_CHANNEL) +// 1.1V reference, no left-adjust, ADC1/PB2 +#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | VOLTAGE_CHANNEL) +#endif +#define ADC_PRSCL 0x06 // clk/64 + +// Raw ADC readings at 4.4V and 2.2V (in-between, we assume values form a straight line) +#ifndef ADC_44 +#define ADC_44 234 +#endif +#ifndef ADC_22 +#define ADC_22 117 +#endif + +#define TEMP_CHANNEL 0b00001111 + +#define FAST 0xA3 // fast PWM both channels +#define PHASE 0xA1 // phase-correct PWM both channels + +#define LAYOUT_DEFINED + +#endif diff --git a/spaghetti-monster/anduril/cfg-mateminco-mf01s.h b/spaghetti-monster/anduril/cfg-mateminco-mf01s.h new file mode 100644 index 0000000..0585b38 --- /dev/null +++ b/spaghetti-monster/anduril/cfg-mateminco-mf01s.h @@ -0,0 +1,45 @@ +// Mateminco/Astrolux MF01S options for Anduril +#include "hwdef-Mateminco_MF01S.h" + +// the button lights up +#define USE_INDICATOR_LED +// the button is visible while main LEDs are on +//#define USE_INDICATOR_LED_WHILE_RAMPING +// enable blinking indicator LED while off +#define TICK_DURING_STANDBY +#define STANDBY_TICK_SPEED 3 // every 0.128 s +#define USE_FANCIER_BLINKING_INDICATOR +// off mode: low (1) +// lockout: blinking (3) +#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1) + + +// don't blink during ramp, it's irrelevant and annoying on this light +#define BLINK_AT_RAMP_CEILING +#undef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_FLOOR + +// measured brightness with 4x30Q cells at 4.11V: +// moon: 2.5 lm +// channel 1: 617 lm +// channel 2: 13500 lm +// ../../../bin/level_calc.py seventh 2 150 7135 1 12 717 FET 1 10 13000 +// (with some manual tweaks afterward) +#define RAMP_LENGTH 150 +#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,5,6,7,7,8,9,10,11,12,13,14,15,17,18,19,21,22,24,26,28,30,32,34,36,38,41,44,46,49,52,55,59,62,66,70,74,78,83,87,92,97,102,108,114,120,126,133,139,147,154,162,170,178,187,196,206,215,226,236,248,255,235,255,240,255,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2,2,3,3,4,4,5,6,7,8,9,10,11,12,13,14,16,17,19,20,22,23,25,26,28,30,31,33,35,37,39,41,43,45,47,49,52,54,57,59,62,65,67,70,73,76,80,83,86,90,93,97,101,105,109,113,117,122,126,131,135,140,145,151,156,161,167,173,179,185,191,197,204,211,218,225,232,239,247,255 +#define MAX_1x7135 70 // ~626 lm +#define HALFSPEED_LEVEL 23 +#define QUARTERSPEED_LEVEL 6 + +#define RAMP_SMOOTH_FLOOR 1 // ~2.5 lm +#define RAMP_SMOOTH_CEIL 120 // ~5400 lm +// 20, 36, 53, [70], 86, 103, 120 +#define RAMP_DISCRETE_FLOOR 20 // 35 lm +#define RAMP_DISCRETE_CEIL 120 // ~5400 lm +#define RAMP_DISCRETE_STEPS 7 // 35, 108, 280, 626, 1500, 2930, 5400 lm + +#define USE_TENCLICK_THERMAL_CONFIG // by request +#define THERM_FASTER_LEVEL 125 // throttle back faster when high (>6000 lm) +#define THERM_HARD_TURBO_DROP // this light is massively overpowered + |