diff options
Diffstat (limited to '')
| -rwxr-xr-x | hwdef-thefreeman-boost-fwaa-mp3432-hdr-dac-rgb.h | 6 | ||||
| -rw-r--r-- | hwdef-thefreeman-boost21-mp3431-hdr-dac-argb.c | 2 | ||||
| -rw-r--r-- | hwdef-wurkkos-ts25.c | 1 | ||||
| -rw-r--r-- | spaghetti-monster/anduril/MODELS | 2 | ||||
| -rw-r--r-- | spaghetti-monster/anduril/anduril-manual.txt | 1 | ||||
| -rw-r--r-- | spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h | 2 |
6 files changed, 8 insertions, 6 deletions
diff --git a/hwdef-thefreeman-boost-fwaa-mp3432-hdr-dac-rgb.h b/hwdef-thefreeman-boost-fwaa-mp3432-hdr-dac-rgb.h index efa3ca7..9126a1a 100755 --- a/hwdef-thefreeman-boost-fwaa-mp3432-hdr-dac-rgb.h +++ b/hwdef-thefreeman-boost-fwaa-mp3432-hdr-dac-rgb.h @@ -106,7 +106,7 @@ enum CHANNEL_MODES { // Voltage divider battLVL #define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is regulated -#define DUAL_VOLTAGE_FLOOR 21 // for AA/14500 boost drivers, don't indicate low voltage if below this level +#define DUAL_VOLTAGE_FLOOR 21 // for AA/14500 boost drivers, don't indicate low voltage if below this level #define DUAL_VOLTAGE_LOW_LOW 7 // the lower voltage range's danger zone 0.7 volts (NiMH) #define ADMUX_VOLTAGE_DIVIDER ADC_MUXPOS_AIN2_gc // which ADC channel to read @@ -157,14 +157,14 @@ inline void hwdef_setup() { //PORTA.PIN5CTRL = PORT_PULLUPEN_bm; // HDR //PORTA.PIN6CTRL = PORT_PULLUPEN_bm; // DAC PORTA.PIN7CTRL = PORT_PULLUPEN_bm; - + PORTB.PIN0CTRL = PORT_PULLUPEN_bm; PORTB.PIN1CTRL = PORT_PULLUPEN_bm; //PORTB.PIN2CTRL = PORT_PULLUPEN_bm; // IN- NFET //PORTB.PIN3CTRL = PORT_PULLUPEN_bm; // R //PORTB.PIN4CTRL = PORT_PULLUPEN_bm; // G //PORTB.PIN5CTRL = PORT_PULLUPEN_bm; // B - + PORTC.PIN0CTRL = PORT_PULLUPEN_bm; PORTC.PIN1CTRL = PORT_PULLUPEN_bm; PORTC.PIN2CTRL = PORT_PULLUPEN_bm; diff --git a/hwdef-thefreeman-boost21-mp3431-hdr-dac-argb.c b/hwdef-thefreeman-boost21-mp3431-hdr-dac-argb.c index 555167e..31feec9 100644 --- a/hwdef-thefreeman-boost21-mp3431-hdr-dac-argb.c +++ b/hwdef-thefreeman-boost21-mp3431-hdr-dac-argb.c @@ -12,7 +12,7 @@ bool gradual_tick_main(uint8_t gt); Channel channels[] = { - { // channel 1 only + { // main LEDs .set_level = set_level_main, .gradual_tick = gradual_tick_main }, diff --git a/hwdef-wurkkos-ts25.c b/hwdef-wurkkos-ts25.c index 3c98716..26c9b0d 100644 --- a/hwdef-wurkkos-ts25.c +++ b/hwdef-wurkkos-ts25.c @@ -25,7 +25,6 @@ void set_level_zero() { CH1_PWM = 0; CH2_PWM = 0; PWM_CNT = 0; // reset phase - return; } // single set of LEDs with 2 stacked power channels, DDFET+1 or DDFET+linear diff --git a/spaghetti-monster/anduril/MODELS b/spaghetti-monster/anduril/MODELS index 97af879..23c5842 100644 --- a/spaghetti-monster/anduril/MODELS +++ b/spaghetti-monster/anduril/MODELS @@ -74,6 +74,8 @@ Model Name MCU 0716 wurkkos-fc13 attiny1616 0717 wurkkos-ts11 attiny1616 1618 gchart-fet1-t1616 attiny1616 +1631 thefreeman-boost21-6a attiny1616 +1632 thefreeman-boost-fwaa attiny1616 Duplicates: diff --git a/spaghetti-monster/anduril/anduril-manual.txt b/spaghetti-monster/anduril/anduril-manual.txt index d47cc57..545af0f 100644 --- a/spaghetti-monster/anduril/anduril-manual.txt +++ b/spaghetti-monster/anduril/anduril-manual.txt @@ -934,6 +934,7 @@ Lockout Full 10H Auto-lock config menu: Strobe (any) Full 1C Off Strobe (any) Full 2C Next strobe mode +Strobe (any) Full 3C Next channel mode (saved per strobe mode) Strobe (any) Full 4C Prev strobe mode Strobe (any) Full 5C Momentary mode (using current strobe) diff --git a/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h b/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h index d9ac882..0e2f28d 100644 --- a/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h +++ b/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h @@ -1,5 +1,5 @@ // Sofirn SP10 Pro config options for Anduril -// Copyright (C) 2022-2023 (FIXME) +// Copyright (C) 2022-2023 (original author TBD), Selene ToyKeeper // SPDX-License-Identifier: GPL-3.0-or-later #pragma once |