diff options
Diffstat (limited to '')
| -rw-r--r-- | spaghetti-monster/fsm-pcint.c | 3 | ||||
| -rw-r--r-- | spaghetti-monster/fsm-wdt.c | 51 |
2 files changed, 25 insertions, 29 deletions
diff --git a/spaghetti-monster/fsm-pcint.c b/spaghetti-monster/fsm-pcint.c index a4a496a..1ba1c15 100644 --- a/spaghetti-monster/fsm-pcint.c +++ b/spaghetti-monster/fsm-pcint.c @@ -97,8 +97,7 @@ void PCINT_inner(uint8_t pressed) { pushed = push_event(B_RELEASE); } - // check if sequence matches any defined sequences - // if so, send event to current state callback + // send event to the current state callback if (pushed) { button_last_state = pressed; emit_current_event(0); diff --git a/spaghetti-monster/fsm-wdt.c b/spaghetti-monster/fsm-wdt.c index beab1a2..0c49a75 100644 --- a/spaghetti-monster/fsm-wdt.c +++ b/spaghetti-monster/fsm-wdt.c @@ -90,6 +90,14 @@ void WDT_inner() { static uint8_t adc_trigger = 0; + // cache this here to reduce ROM size, because it's volatile + uint16_t ticks_since_last = ticks_since_last_event; + // increment, but loop from max back to half + ticks_since_last = (ticks_since_last + 1) \ + | (ticks_since_last & 0x8000); + // copy back to the original + ticks_since_last_event = ticks_since_last; + // detect and emit button change events (even during standby) uint8_t was_pressed = button_last_state; uint8_t pressed = button_is_pressed(); @@ -97,38 +105,29 @@ void WDT_inner() { go_to_standby = 0; PCINT_inner(pressed); } + // cache again, in case the value changed + ticks_since_last = ticks_since_last_event; #ifdef TICK_DURING_STANDBY - static uint16_t sleep_counter = 0; // handle standby mode specially if (go_to_standby) { // emit a halfsleep tick, and process it - emit(EV_sleep_tick, sleep_counter); - // wrap around from 65535 to 32768, not 0 - sleep_counter = (sleep_counter + 1) | (sleep_counter & 0x8000); + emit(EV_sleep_tick, ticks_since_last); process_emissions(); - #if defined(USE_SLEEP_LVP) + #ifndef USE_SLEEP_LVP + return; // no sleep LVP needed if nothing drains power while off + #else // stop here, usually... but proceed often enough for sleep LVP to work - if (0 != (sleep_counter & 0x7f)) return; + if (0 != (ticks_since_last & 0x7f)) return; + adc_trigger = 255; // make sure a measurement will happen - #else - return; // no sleep LVP needed if nothing drains power while off + ADC_on(); // enable ADC voltage measurement functions temporarily #endif } - else { sleep_counter = 0; } + else { // button handling should only happen while awake #endif - // cache this here to reduce ROM size, because it's volatile - uint16_t ticks_since_last = ticks_since_last_event; - - // increment, but loop from max back to half - //if (ticks_since_last < 0xff) ticks_since_last ++; - ticks_since_last = (ticks_since_last + 1) \ - | (ticks_since_last & 0x8000); - // copy back to the original - ticks_since_last_event = ticks_since_last; - // if time since last event exceeds timeout, // append timeout to current event sequence, then // send event to current state callback @@ -148,9 +147,9 @@ void WDT_inner() { emit_current_event(ticks_since_last); } // has button been down long enough to become a "hold"? + // (first frame of a "hold" event) else { if (ticks_since_last >= HOLD_TIMEOUT) { - //ticks_since_last_event = 0; current_event |= B_HOLD; emit_current_event(0); } @@ -163,27 +162,25 @@ void WDT_inner() { // no timeout required when releasing a long-press // TODO? move this logic to PCINT() and simplify things here? if (current_event & B_HOLD) { - //emit_current_event(0); // should have been emitted by PCINT + //emit_current_event(0); // should have been emitted by PCINT_inner() empty_event_sequence(); } // end and clear event after release timeout else if (ticks_since_last >= RELEASE_TIMEOUT) { current_event |= B_TIMEOUT; - //ticks_since_last_event = 0; emit_current_event(0); empty_event_sequence(); } } + #ifdef TICK_DURING_STANDBY + } + #endif + #if defined(USE_LVP) || defined(USE_THERMAL_REGULATION) // start a new ADC measurement every 4 ticks adc_trigger ++; if (0 == (adc_trigger & 3)) { - #if defined(TICK_DURING_STANDBY) && defined(USE_SLEEP_LVP) - // we shouldn't be here unless it woke up for a LVP check... - // so enable ADC voltage measurement functions temporarily - if (go_to_standby) ADC_on(); - #endif ADC_start_measurement(); irq_adc_stable = 0; adcint_enable = 1; |