diff options
| -rw-r--r-- | spaghetti-monster/anduril/cfg-ff-rot66.h | 24 |
1 files changed, 16 insertions, 8 deletions
diff --git a/spaghetti-monster/anduril/cfg-ff-rot66.h b/spaghetti-monster/anduril/cfg-ff-rot66.h index 8a63719..6cae4fd 100644 --- a/spaghetti-monster/anduril/cfg-ff-rot66.h +++ b/spaghetti-monster/anduril/cfg-ff-rot66.h @@ -4,13 +4,18 @@ #define USE_INDICATOR_LED // the button is visible while main LEDs are on #define USE_INDICATOR_LED_WHILE_RAMPING -// enable blinking indicator LED while off -// (no, it doesn't really make sense on this light) -#define TICK_DURING_STANDBY +// enable blinking indicator LED while off? +//#define TICK_DURING_STANDBY +// If TICK_DURING_STANDBY is enabled... // off mode: high (2) // lockout: blinking (3) -#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 2) +//#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 2) + +// ... or if TICK_DURING_STANDBY is turned off: +// off mode: high (2) +// lockout: off (0) +#define INDICATOR_LED_DEFAULT_MODE ((0<<2) + 2) #ifdef RAMP_LENGTH @@ -25,16 +30,19 @@ // first 65 steps copied from FW3A #define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,7,8,9,10,12,13,14,15,17,19,20,22,24,26,29,31,34,36,39,42,45,48,51,55,59,62,66,70,75,79,84,89,93,99,104,110,115,121,127,134,140,147,154,161,168,176,184,192,200,209,217,226,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 // remaining steps from this command: -// level_calc.py 3 150 7135 1 1.4 110.1 7135 4 1 1058.5 FET 1 10 4500 -#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,5,7,8,10,12,14,15,17,20,22,24,26,29,32,34,37,40,43,47,50,54,57,61,65,70,74,79,83,88,94,99,105,111,117,123,130,137,144,151,159,167,175,184,193,202,212,222,233,244,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +// level_calc.py 3 150 7135 1 1.4 110.1 7135 14 1 1058.5 FET 1 10 4500 +#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,15,17,18,20,21,23,25,27,29,31,33,36,38,41,43,46,49,52,55,58,62,65,69,73,77,81,86,90,95,100,105,111,116,122,128,135,141,148,155,163,170,178,187,195,204,214,224,234,244,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 #define PWM3_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,4,8,12,16,21,25,30,35,40,45,50,56,62,68,74,81,87,94,101,109,116,124,133,141,150,159,168,178,188,198,209,220,231,243,255 #define MAX_1x7135 65 #define MAX_Nx7135 115 #define HALFSPEED_LEVEL 14 -#define QUARTERSPEED_LEVEL 5 +#define QUARTERSPEED_LEVEL 8 // regulate down faster when the FET is active, slower otherwise -#define THERM_FASTER_LEVEL 120 // throttle back faster when high +#define THERM_FASTER_LEVEL 130 // throttle back faster when high + +// play it safe, don't try to regulate above the recommended safe level +#define THERM_HARD_TURBO_DROP // don't do this #undef BLINK_AT_CHANNEL_BOUNDARIES |