aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--hwdef-BLF_Q8-T1616.h14
-rw-r--r--hwdef-Sofirn_SP10-Pro.h (renamed from hwdef-Sofirn_SP10S.h)48
-rw-r--r--hwdef-gchart-fet1-t1616.h17
-rw-r--r--spaghetti-monster/anduril/MODELS2
-rw-r--r--spaghetti-monster/anduril/cfg-blf-lantern-t1616.h3
-rw-r--r--spaghetti-monster/anduril/cfg-blf-lantern.h6
-rw-r--r--spaghetti-monster/anduril/cfg-blf-q8-t1616.h14
-rw-r--r--spaghetti-monster/anduril/cfg-blf-q8.h14
-rw-r--r--spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h54
-rw-r--r--spaghetti-monster/anduril/cfg-sofirn-sp10s.h28
-rw-r--r--spaghetti-monster/anduril/factory-reset.c5
-rw-r--r--spaghetti-monster/anduril/ramp-mode.c10
-rw-r--r--spaghetti-monster/anduril/version.h5
-rw-r--r--spaghetti-monster/fsm-main.c13
-rw-r--r--tk-attiny.h16
15 files changed, 162 insertions, 87 deletions
diff --git a/hwdef-BLF_Q8-T1616.h b/hwdef-BLF_Q8-T1616.h
index 2a0e6ff..d6ad760 100644
--- a/hwdef-BLF_Q8-T1616.h
+++ b/hwdef-BLF_Q8-T1616.h
@@ -61,8 +61,8 @@ Driver pinout:
// ... so just hardcode it in each hwdef file instead
inline void hwdef_setup() {
- // set up the system clock to run at 5 MHz instead of the default 3.33 MHz
- _PROTECTED_WRITE( CLKCTRL.MCLKCTRLB, CLKCTRL_PDIV_4X_gc | CLKCTRL_PEN_bm );
+ // set up the system clock to run at 10 MHz instead of the default 3.33 MHz
+ _PROTECTED_WRITE( CLKCTRL.MCLKCTRLB, CLKCTRL_PDIV_2X_gc | CLKCTRL_PEN_bm );
//VPORTA.DIR = ...;
VPORTB.DIR = PIN0_bm | PIN1_bm | PIN5_bm; // Outputs: Aux LED and PWMs
@@ -91,8 +91,14 @@ inline void hwdef_setup() {
PORTC.PIN3CTRL = PORT_PULLUPEN_bm;
// set up the PWM
- // TODO: add references to MCU documentation
- TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm | TCA_SINGLE_CMP1EN_bm | TCA_SINGLE_WGMODE_SINGLESLOPE_gc;
+ // https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny1614-16-17-DataSheet-DS40002204A.pdf
+ // PB0 is TCA0:WO0, use TCA_SINGLE_CMP0EN_bm
+ // PB1 is TCA0:WO1, use TCA_SINGLE_CMP1EN_bm
+ // PB2 is TCA0:WO2, use TCA_SINGLE_CMP2EN_bm
+ // For Fast (Single Slope) PWM use TCA_SINGLE_WGMODE_SINGLESLOPE_gc
+ // For Phase Correct (Dual Slope) PWM use TCA_SINGLE_WGMODE_DSBOTTOM_gc
+ // See the manual for other pins, clocks, configs, portmux, etc
+ TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm | TCA_SINGLE_CMP1EN_bm | TCA_SINGLE_WGMODE_DSBOTTOM_gc;
TCA0.SINGLE.PER = 255;
TCA0.SINGLE.CTRLA = TCA_SINGLE_CLKSEL_DIV1_gc | TCA_SINGLE_ENABLE_bm;
}
diff --git a/hwdef-Sofirn_SP10S.h b/hwdef-Sofirn_SP10-Pro.h
index 0ee3332..e35728c 100644
--- a/hwdef-Sofirn_SP10S.h
+++ b/hwdef-Sofirn_SP10-Pro.h
@@ -1,28 +1,14 @@
-#ifndef HWDEF_SOFIRN_SP10S_H
-#define HWDEF_SOFIRN_SP10S_H
+#ifndef HWDEF_SOFIRN_SP10_H
+#define HWDEF_SOFIRN_SP10_H
-// TODO: rename to sofirn-sp10s-gchart?
-
-/* gChart's PIC12 to ATTINY1616 v1 adapter for the SP10S
-https://oshpark.com/shared_projects/b4IZEGSy
-
-PIC12 Pinout:
-1 - VDD
-2 - No Connect
-3 - Low Channel FET (series 4.7K Ohms)
-4 - Switch
-5 - High Channel FET (main PWM)
-6 - Voltage Divider (300K:100K Ohms)
-7 - Boost chip enable
-8 - GND
+/* Sofirn SP10 Pro pinout
ATTINY1616 Mapping:
-2 - PA5 : (no connect)
-3 - PB5 : TCA0 - WO2 Alternate MUX
-4 - PB3 : (switch)
-5 - PB0 : TCA0 - WO0
-6 - PB4 : ADC0 - AIN9
-7 - PA1 : (boost enable)
+PB5 : PWM small channel (TCA0 - WO2 Alternate MUX)
+PB3 : eSwitch
+PB0 : PWM big channel (TCA0 - WO0)
+PB4 : Voltage divider (ADC0 - AIN9)
+PA1 : Boost Enable
*/
@@ -62,7 +48,7 @@ ATTINY1616 Mapping:
#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
#define DUAL_VOLTAGE_FLOOR 20 // for AA/14500 boost drivers, don't indicate low voltage if below this level
-#define DUAL_VOLTAGE_LOW_LOW 07 // the lower voltage range's danger zone 0.7 volts
+#define DUAL_VOLTAGE_LOW_LOW 9 // the lower voltage range's danger zone 0.9 volts (NiMH)
#define ADMUX_VOLTAGE_DIVIDER ADC_MUXPOS_AIN9_gc // which ADC channel to read
// Raw ADC readings at 4.4V and 2.2V
@@ -83,8 +69,8 @@ ATTINY1616 Mapping:
// ... so just hardcode it in each hwdef file instead
inline void hwdef_setup() {
- // set up the system clock to run at 5 MHz instead of the default 3.33 MHz
- _PROTECTED_WRITE( CLKCTRL.MCLKCTRLB, CLKCTRL_PDIV_4X_gc | CLKCTRL_PEN_bm );
+ // set up the system clock to run at 10 MHz instead of the default 3.33 MHz
+ _PROTECTED_WRITE( CLKCTRL.MCLKCTRLB, CLKCTRL_PDIV_2X_gc | CLKCTRL_PEN_bm );
VPORTA.DIR = PIN1_bm; // Boost enable pin
VPORTB.DIR = PIN0_bm | PIN5_bm; // PWM pins as output
@@ -107,15 +93,21 @@ inline void hwdef_setup() {
//PORTB.PIN4CTRL = PORT_PULLUPEN_bm; // Voltage divider
//PORTB.PIN5CTRL = PORT_PULLUPEN_bm; // Small PWM channel
- //PORTC.PIN0CTRL = PORT_PULLUPEN_bm; connected to the ADC via airwire
+ PORTC.PIN0CTRL = PORT_PULLUPEN_bm;
PORTC.PIN1CTRL = PORT_PULLUPEN_bm;
PORTC.PIN2CTRL = PORT_PULLUPEN_bm;
PORTC.PIN3CTRL = PORT_PULLUPEN_bm;
// set up the PWM
- // TODO: add references to MCU documentation
+ // https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny1614-16-17-DataSheet-DS40002204A.pdf
+ // PB0 is TCA0:WO0, use TCA_SINGLE_CMP0EN_bm
+ // PB1 is TCA0:WO1, use TCA_SINGLE_CMP1EN_bm
+ // PB2 is TCA0:WO2, use TCA_SINGLE_CMP2EN_bm
+ // For Fast (Single Slope) PWM use TCA_SINGLE_WGMODE_SINGLESLOPE_gc
+ // For Phase Correct (Dual Slope) PWM use TCA_SINGLE_WGMODE_DSBOTTOM_gc
+ // See the manual for other pins, clocks, configs, portmux, etc
PORTMUX.CTRLC = PORTMUX_TCA02_ALTERNATE_gc; // Use alternate pin for TCA0:WO2
- TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm | TCA_SINGLE_CMP2EN_bm | TCA_SINGLE_WGMODE_SINGLESLOPE_gc;
+ TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm | TCA_SINGLE_CMP2EN_bm | TCA_SINGLE_WGMODE_DSBOTTOM_gc;
TCA0.SINGLE.PER = 255;
TCA0.SINGLE.CTRLA = TCA_SINGLE_CLKSEL_DIV1_gc | TCA_SINGLE_ENABLE_bm;
}
diff --git a/hwdef-gchart-fet1-t1616.h b/hwdef-gchart-fet1-t1616.h
index 365ecd7..2435b99 100644
--- a/hwdef-gchart-fet1-t1616.h
+++ b/hwdef-gchart-fet1-t1616.h
@@ -60,8 +60,8 @@ Read voltage from VCC pin, has diode with ~0.4v drop
// ... so just hardcode it in each hwdef file instead
inline void hwdef_setup() {
- // set up the system clock to run at 5 MHz instead of the default 3.33 MHz
- _PROTECTED_WRITE( CLKCTRL.MCLKCTRLB, CLKCTRL_PDIV_4X_gc | CLKCTRL_PEN_bm );
+ // set up the system clock to run at 10 MHz instead of the default 3.33 MHz
+ _PROTECTED_WRITE( CLKCTRL.MCLKCTRLB, CLKCTRL_PDIV_2X_gc | CLKCTRL_PEN_bm );
//VPORTA.DIR = 0b00000010;
VPORTB.DIR = PIN0_bm | PIN1_bm | PIN3_bm;
@@ -90,11 +90,14 @@ inline void hwdef_setup() {
PORTC.PIN3CTRL = PORT_PULLUPEN_bm;
// set up the PWM
- // TODO: add references to MCU documentation
- // TODO: measure 5 MHz fast PWM vs 10 MHz phase-correct, to see if it
- // still has issues at 0/255 and 255/255 like older models did
- // (and maybe switch to phase-correct@10MHz)
- TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm | TCA_SINGLE_CMP1EN_bm | TCA_SINGLE_WGMODE_SINGLESLOPE_gc;
+ // https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny1614-16-17-DataSheet-DS40002204A.pdf
+ // PB0 is TCA0:WO0, use TCA_SINGLE_CMP0EN_bm
+ // PB1 is TCA0:WO1, use TCA_SINGLE_CMP1EN_bm
+ // PB2 is TCA0:WO2, use TCA_SINGLE_CMP2EN_bm
+ // For Fast (Single Slope) PWM use TCA_SINGLE_WGMODE_SINGLESLOPE_gc
+ // For Phase Correct (Dual Slope) PWM use TCA_SINGLE_WGMODE_DSBOTTOM_gc
+ // See the manual for other pins, clocks, configs, portmux, etc
+ TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm | TCA_SINGLE_CMP1EN_bm | TCA_SINGLE_WGMODE_DSBOTTOM_gc;
TCA0.SINGLE.PER = 255;
TCA0.SINGLE.CTRLA = TCA_SINGLE_CLKSEL_DIV1_gc | TCA_SINGLE_ENABLE_bm;
}
diff --git a/spaghetti-monster/anduril/MODELS b/spaghetti-monster/anduril/MODELS
index 11f7dfa..7a2c438 100644
--- a/spaghetti-monster/anduril/MODELS
+++ b/spaghetti-monster/anduril/MODELS
@@ -49,7 +49,7 @@ Model numbers:
0614 sofirn-sp36-t1616
0621 blf-lantern
0622 blf-lantern-t1616
-0631 sofirn-sp10s
+0631 sofirn-sp10-pro
1618 gchart-fet1-t1616
Duplicates:
Missing:
diff --git a/spaghetti-monster/anduril/cfg-blf-lantern-t1616.h b/spaghetti-monster/anduril/cfg-blf-lantern-t1616.h
index 56c7275..06d5395 100644
--- a/spaghetti-monster/anduril/cfg-blf-lantern-t1616.h
+++ b/spaghetti-monster/anduril/cfg-blf-lantern-t1616.h
@@ -50,6 +50,9 @@
#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
#define SIMPLE_UI_STEPS RAMP_DISCRETE_STEPS
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
#define USE_SOS_MODE
#define USE_SOS_MODE_IN_BLINKY_GROUP
diff --git a/spaghetti-monster/anduril/cfg-blf-lantern.h b/spaghetti-monster/anduril/cfg-blf-lantern.h
index 48ed1f7..ff28a98 100644
--- a/spaghetti-monster/anduril/cfg-blf-lantern.h
+++ b/spaghetti-monster/anduril/cfg-blf-lantern.h
@@ -45,11 +45,17 @@
#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
#define RAMP_DISCRETE_STEPS 5
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
// LT1 can handle heat well, so don't limit simple mode
#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
#define SIMPLE_UI_STEPS RAMP_DISCRETE_STEPS
+// also at Sofirn's request, enable 2 click turbo
+#define USE_2C_MAX_TURBO
+
#define USE_SOS_MODE
#define USE_SOS_MODE_IN_BLINKY_GROUP
diff --git a/spaghetti-monster/anduril/cfg-blf-q8-t1616.h b/spaghetti-monster/anduril/cfg-blf-q8-t1616.h
index 002e8e3..340faa1 100644
--- a/spaghetti-monster/anduril/cfg-blf-q8-t1616.h
+++ b/spaghetti-monster/anduril/cfg-blf-q8-t1616.h
@@ -29,11 +29,21 @@
#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
#define RAMP_DISCRETE_STEPS 7
-// safe limit ~50% power
+// at Sofirn's request, use max (150) for the Simple UI ceiling
#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_CEIL 150
#define SIMPLE_UI_STEPS 5
+// also at Sofirn's request, enable 2 click turbo
+#define USE_2C_MAX_TURBO
+
+// enable SOS in the blinkies group
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
// stop panicking at ~75% power or ~3000 lm, this light has high thermal mass
#define THERM_FASTER_LEVEL (RAMP_SIZE*9/10) // throttle back faster when high
diff --git a/spaghetti-monster/anduril/cfg-blf-q8.h b/spaghetti-monster/anduril/cfg-blf-q8.h
index d4243ee..00bdd8a 100644
--- a/spaghetti-monster/anduril/cfg-blf-q8.h
+++ b/spaghetti-monster/anduril/cfg-blf-q8.h
@@ -28,11 +28,21 @@
#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
#define RAMP_DISCRETE_STEPS 7
-// safe limit ~50% power
+// at Sofirn's request, use max (150) for the Simple UI ceiling
#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
-#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_CEIL 150
#define SIMPLE_UI_STEPS 5
+// also at Sofirn's request, enable 2 click turbo
+#define USE_2C_MAX_TURBO
+
+// enable SOS in the blinkies group
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
// stop panicking at ~75% power or ~3000 lm, this light has high thermal mass
#define THERM_FASTER_LEVEL (RAMP_SIZE*9/10) // throttle back faster when high
diff --git a/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h b/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h
new file mode 100644
index 0000000..2d0ea7f
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-sofirn-sp10-pro.h
@@ -0,0 +1,54 @@
+// Sofirn SP10 Pro config options for Anduril
+#define MODEL_NUMBER "0631"
+#include "hwdef-Sofirn_SP10-Pro.h"
+// ATTINY: 1616
+
+#undef BLINK_AT_RAMP_MIDDLE
+
+#define USE_DYNAMIC_UNDERCLOCKING
+
+// PWM is mostly a "ninth" ramp from level_calc.py but with some extra lower values at the beginning of the ramp
+#define RAMP_LENGTH 150
+#define PWM1_LEVELS 255,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+#define PWM2_LEVELS 0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,3,3,3,3,3,3,3,3,3,4,4,4,4,4,4,5,5,5,5,6,6,6,7,7,7,8,8,8,9,9,10,10,10,11,11,12,12,13,14,14,15,16,16,17,18,18,19,20,21,22,23,24,25,26,27,28,29,30,31,33,34,35,37,38,40,41,43,45,46,48,50,52,54,56,58,60,63,65,67,70,73,75,78,81,84,87,90,93,97,100,104,107,111,115,119,123,128,132,137,141,146,151,156,162,167,173,179,185,191,197,204,210,217,224,232,239,247,255
+
+#define MAX_1x7135 80
+#define HALFSPEED_LEVEL 14
+#define QUARTERSPEED_LEVEL 6
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 120
+#define RAMP_DISCRETE_FLOOR RAMP_SMOOTH_FLOOR
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// at Sofirn's request, use max (150) for the Simple UI ceiling
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL 150
+#define SIMPLE_UI_STEPS 5
+
+// also at Sofirn's request, enable 2 click turbo
+#define USE_2C_MAX_TURBO
+
+// enable SOS in the blinkies group
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+// and finally, set the default ramp style to Stepped
+#undef RAMP_STYLE
+#define RAMP_STYLE 1 // 0 = smooth, 1 = stepped
+
+// stop panicking at ~30% power
+#define THERM_FASTER_LEVEL 105
+
+// slow down party strobe; this driver can't pulse for too short a time
+#define PARTY_STROBE_ONTIME 6
+
+// the default of 26 looks a bit flat, so increase it
+#define CANDLE_AMPLITUDE 40
+
+// enable 2 click turbo
+#define DEFAULT_2C_STYLE 1
diff --git a/spaghetti-monster/anduril/cfg-sofirn-sp10s.h b/spaghetti-monster/anduril/cfg-sofirn-sp10s.h
deleted file mode 100644
index 06720b6..0000000
--- a/spaghetti-monster/anduril/cfg-sofirn-sp10s.h
+++ /dev/null
@@ -1,28 +0,0 @@
-// gChart's custom SP10S driver config options for Anduril
-#define MODEL_NUMBER "0631"
-#include "hwdef-Sofirn_SP10S.h"
-// ATTINY: 1616
-
-#undef BLINK_AT_RAMP_MIDDLE
-
-#define USE_DYNAMIC_UNDERCLOCKING
-
-#define RAMP_LENGTH 150
-#define PWM1_LEVELS 20,30,41,54,69,87,106,128,152,179,209,242,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
-#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1,1,2,2,2,2,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,10,10,11,12,12,13,14,14,15,16,17,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,33,34,35,36,38,39,41,42,43,45,46,48,50,51,53,55,56,58,60,62,64,66,68,70,72,74,76,78,80,83,85,87,90,92,94,97,99,102,105,107,110,113,116,119,121,124,127,130,133,137,140,143,146,150,153,156,160,164,167,171,174,178,182,186,190,194,198,202,206,210,214,219,223,227,232,236,241,246,250,255
-
-#define MAX_1x7135 13
-#define HALFSPEED_LEVEL 14
-#define QUARTERSPEED_LEVEL 6
-
-#define RAMP_SMOOTH_FLOOR 1
-#define RAMP_SMOOTH_CEIL 120
-#define RAMP_DISCRETE_FLOOR 10
-#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
-#define RAMP_DISCRETE_STEPS 7
-
-// stop panicking at ~30% power
-#define THERM_FASTER_LEVEL 105
-
-// enable 2 click turbo
-#define DEFAULT_2C_STYLE 1
diff --git a/spaghetti-monster/anduril/factory-reset.c b/spaghetti-monster/anduril/factory-reset.c
index 5377b09..ecb4cc2 100644
--- a/spaghetti-monster/anduril/factory-reset.c
+++ b/spaghetti-monster/anduril/factory-reset.c
@@ -43,7 +43,10 @@ void factory_reset() {
}
// explode, if button pressed long enough
if (reset) {
- #if defined(USE_THERMAL_REGULATION) && defined(USE_THERM_AUTOCALIBRATE)
+ // AVR 1-Series has factory calibrated thermal sensor, always remove the offset on reset
+ #if defined(USE_THERMAL_REGULATION) && defined(AVRXMEGA3)
+ thermal_config_save(1,temperature - therm_cal_offset); // this will cancel out the offset
+ #elif defined(USE_THERMAL_REGULATION) && defined(USE_THERM_AUTOCALIBRATE)
// auto-calibrate temperature... assume current temperature is 21 C
thermal_config_save(1, 21);
#endif
diff --git a/spaghetti-monster/anduril/ramp-mode.c b/spaghetti-monster/anduril/ramp-mode.c
index 6d85480..ce3f473 100644
--- a/spaghetti-monster/anduril/ramp-mode.c
+++ b/spaghetti-monster/anduril/ramp-mode.c
@@ -370,7 +370,8 @@ uint8_t steady_state(Event event, uint16_t arg) {
#endif // ifdef USE_THERMAL_REGULATION
////////// Every action below here is blocked in the simple UI //////////
- #ifdef USE_SIMPLE_UI
+ // That is, unless we specifically want to enable 3C for smooth/stepped selection in Simple UI
+ #if defined(USE_SIMPLE_UI) && !defined(USE_SIMPLE_UI_RAMPING_TOGGLE)
if (simple_ui_active) {
return EVENT_NOT_HANDLED;
}
@@ -392,6 +393,13 @@ uint8_t steady_state(Event event, uint16_t arg) {
return MISCHIEF_MANAGED;
}
+ // If we allowed 3C in Simple UI, now block further actions
+ #if defined(USE_SIMPLE_UI) && defined(USE_SIMPLE_UI_RAMPING_TOGGLE)
+ if (simple_ui_active) {
+ return EVENT_NOT_HANDLED;
+ }
+ #endif
+
#ifndef USE_TINT_RAMPING
// 3H: momentary turbo (on lights with no tint ramping)
else if (event == EV_click3_hold) {
diff --git a/spaghetti-monster/anduril/version.h b/spaghetti-monster/anduril/version.h
index 8cf3c90..cb49013 100644
--- a/spaghetti-monster/anduril/version.h
+++ b/spaghetti-monster/anduril/version.h
@@ -1,4 +1 @@
-// this file is replaced automatically by the build script
-// set your own date here if you're not using the build script
-// otherwise, default to first human contact with the moon
-#define VERSION_NUMBER "19690720"
+#define VERSION_NUMBER "20210825"
diff --git a/spaghetti-monster/fsm-main.c b/spaghetti-monster/fsm-main.c
index 7031009..30b8a67 100644
--- a/spaghetti-monster/fsm-main.c
+++ b/spaghetti-monster/fsm-main.c
@@ -46,19 +46,30 @@ static inline void hw_setup() {
DDRB |= (1 << PWM1_PIN);
TCCR0B = 0x01; // pre-scaler for timer (1 => 1, 2 => 8, 3 => 64...)
TCCR0A = PHASE;
+ #if (PWM1_PIN == PB4) // Second PWM counter is ... weird
+ TCCR1 = _BV (CS10);
+ GTCCR = _BV (COM1B1) | _BV (PWM1B);
+ OCR1C = 255; // Set ceiling value to maximum
+ #endif
#endif
// tint ramping needs second channel enabled,
// despite PWM_CHANNELS being only 1
#if (PWM_CHANNELS >= 2) || defined(USE_TINT_RAMPING)
DDRB |= (1 << PWM2_PIN);
+ #if (PWM2_PIN == PB4) // Second PWM counter is ... weird
+ TCCR1 = _BV (CS10);
+ GTCCR = _BV (COM1B1) | _BV (PWM1B);
+ OCR1C = 255; // Set ceiling value to maximum
+ #endif
#endif
#if PWM_CHANNELS >= 3
- // Second PWM counter is ... weird
DDRB |= (1 << PWM3_PIN);
+ #if (PWM3_PIN == PB4) // Second PWM counter is ... weird
TCCR1 = _BV (CS10);
GTCCR = _BV (COM1B1) | _BV (PWM1B);
OCR1C = 255; // Set ceiling value to maximum
#endif
+ #endif
#if PWM_CHANNELS >= 4
// 4th PWM channel is ... not actually supported in hardware :(
DDRB |= (1 << PWM4_PIN);
diff --git a/tk-attiny.h b/tk-attiny.h
index ae70afd..110507b 100644
--- a/tk-attiny.h
+++ b/tk-attiny.h
@@ -73,7 +73,7 @@
//#define VOLTAGE_ADC_DIDR DIDR0 // set this in hwdef
#elif (ATTINY == 412) || (ATTINY == 416) || (ATTINY == 417) || (ATTINY == 816) || (ATTINY == 817) || (ATTINY == 1616) || (ATTINY == 1617) || (ATTINY == 3216) || (ATTINY == 3217)
#define AVRXMEGA3
- #define F_CPU 5000000UL
+ #define F_CPU 10000000UL
#define BOGOMIPS (F_CPU/4000)
#define EEPSIZE 128
#define DELAY_ZERO_TIME 1020
@@ -155,14 +155,14 @@
}
typedef enum
{
- // Actual clock is 20 MHz, but assume that 5 MHz is the top speed and work from there
+ // Actual clock is 20 MHz, but assume that 10 MHz is the top speed and work from there
// TODO: measure PWM speed and power use at 1.25/2.5/5/10 MHz, to determine which speeds are optimal
- clock_div_1 = (CLKCTRL_PDIV_4X_gc | CLKCTRL_PEN_bm), // 5 MHz
- clock_div_2 = (CLKCTRL_PDIV_8X_gc | CLKCTRL_PEN_bm), // 2.5 MHz
- clock_div_4 = (CLKCTRL_PDIV_16X_gc | CLKCTRL_PEN_bm), // 1.25 MHz
- clock_div_8 = (CLKCTRL_PDIV_32X_gc | CLKCTRL_PEN_bm), // 625 kHz
- clock_div_16 = (CLKCTRL_PDIV_64X_gc | CLKCTRL_PEN_bm), // 312 kHz, max without changing to the 32 kHz ULP
- clock_div_32 = (CLKCTRL_PDIV_64X_gc | CLKCTRL_PEN_bm), // 312 kHz
+ clock_div_1 = (CLKCTRL_PDIV_2X_gc | CLKCTRL_PEN_bm), // 10 MHz
+ clock_div_2 = (CLKCTRL_PDIV_4X_gc | CLKCTRL_PEN_bm), // 5 MHz
+ clock_div_4 = (CLKCTRL_PDIV_8X_gc | CLKCTRL_PEN_bm), // 2.5 MHz
+ clock_div_8 = (CLKCTRL_PDIV_16X_gc | CLKCTRL_PEN_bm), // 1.25 MHz
+ clock_div_16 = (CLKCTRL_PDIV_32X_gc | CLKCTRL_PEN_bm), // 625 kHz
+ clock_div_32 = (CLKCTRL_PDIV_64X_gc | CLKCTRL_PEN_bm), // 312 kHz, max without changing to the 32 kHz ULP
clock_div_64 = (CLKCTRL_PDIV_64X_gc | CLKCTRL_PEN_bm), // 312 kHz
clock_div_128 = (CLKCTRL_PDIV_64X_gc | CLKCTRL_PEN_bm), // 312 kHz
clock_div_256 = (CLKCTRL_PDIV_64X_gc | CLKCTRL_PEN_bm) // 312 kHz
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 16:51:36 +0000