diff options
Diffstat (limited to '')
| -rw-r--r-- | ChangeLog.md | 167 |
1 files changed, 115 insertions, 52 deletions
diff --git a/ChangeLog.md b/ChangeLog.md index 0aaa392..eb0d062 100644 --- a/ChangeLog.md +++ b/ChangeLog.md @@ -10,10 +10,73 @@ formats: - Removed - Changed - Documented - - @brand-model: Hardware-specific change (NNNN, NNNN, ...) + - &brand-model: Hardware-specific change (NNNN, NNNN, ...) # Next +# 2023-12-03 + +This release is somewhat higher risk than usual, because so many large things +changed deep in the code. I did major restructuring and refactoring across the +entire project. It should work fine, but be on the lookout for any weird +problems. + +General: + +- Moved from Bzr + Launchpad to **Git + GitHub**, by popular request. +- **Completely reorganized the project** files. Really, a *massive* amount of + restructuring. The flashlight end-user interface is still the same, but + expect to have to learn the code layout from scratch. Read the [README.md] + for info about getting started with the new project layout. +- Added support for AVR DD MCUs like **avr32dd20**. This is the recommended + MCU to use in new flashlights. +- Added ability to use turbo in momentary mode. +- Upgraded **battery voltage resolution** from 0.1V steps to **0.025V** steps. + Battery check has an extra digit which can be 0, 2, 5, or 7 (for example, for + 3.70V, 3.725V, .3.75V, and 3.775V). +- Re-calibrated timing on each MCU type, so a 1-second beacon flasher should be + closer to 1 actual second now... mostly. Timing still varies significantly + from one light to another. +- Fixed default bike flasher brightness on some builds. It was sometimes way + too high. +- Fixed RGB aux turning on during momentary mode sometimes. +- Converted documentation to markdown format, and rewrote a lot of it. +- Fixed some build issues with specific compile-time options. +- Changed the format of **version numbers**. It now uses the most recent + release tag instead of the build date, and **may have additional numbers at + the end** to indicate distance from the last official release, and whether + the repo was clean or dirty. Today's release is `MODEL-2023-12-03`. A + derivative built 52 commits later in a dirty repo would look like + `MODEL-2023-12-03-52-1`. + +New lights: + +- Added &thefreeman-avr32dd20-devkit. It's only used for development purposes, + but otherwise it's pretty neat. It'll be the basis for many new lights in + the future. (model 1632dd20) + +Hardware-specific changes: + +- Improved idle efficiency on attiny1616, which was spending entirely too much + time doing math it didn't actually need. +- &hank-\*-boost: Fixed flicker while holding button at moon level. Reduced + ripple on low modes. (0216, 0253, 0273) +- &lumintop-blf-gt: Added smooth steps. Removed a couple other things to make + room. (0321) +- &lumintop-fw3x: Multiple fixes and upgrades... (0314, 0315) + - Fixed thermal regulation. Also fixed the external temperature sensor. + - Made moon much lower, and made ramp much smoother, by upgrading to DSM. + - Fixed the aux RGB pinouts because Lumintop got the wiring backward. + - Added a second build target for people who fixed the wires manually. + - Added red/blue police color strobe. + - Made low modes more efficient with underclocking. Moon should run at least + 4X as long as it did before. + - Fixed party strobe being blurry. + - Added documentation for the FW3X's multiple, uh, quirks. +- &sofirn-lt1s-pro: Disabled manual memory, memory timer, and extended simple + UI by default. Simple mode is simpler, and the factory settings should be + more consistent with other lights now. (0623) + # 2023-10-31 General: @@ -37,30 +100,30 @@ General: New lights: -- @thefreeman-boost21-6a: Added. (1631) +- &thefreeman-boost21-6a: Added. (1631) (very nice HDR boost driver which fits into a FW3A) -- @thefreeman-boost-fwaa: Added. (1632) +- &thefreeman-boost-fwaa: Added. (1632) (very nice AA/li-ion HDR boost driver which fits into a FWAA) Hardware-specific changes: - Upgraded several builds to use delta-sigma modulation (DSM), for lower lows and smoother ramping with less flicker or ripple: - - @blf-lt1 (0621) - - @blf-lt1-t1616 (0622) - - @emisar-d4k-3ch (0151) + - &blf-lt1 (0621) + - &blf-lt1-t1616 (0622) + - &emisar-d4k-3ch (0151) (**dramatically** improves resolution and low modes on its 8-bit channel) - - @noctigon-dm11-boost (0273) - - @noctigon-kr4-boost (0216) - - @noctigon-k1-boost (0253) - - @noctigon-m44 (0143) + - &noctigon-dm11-boost (0273) + - &noctigon-kr4-boost (0216) + - &noctigon-k1-boost (0253) + - &noctigon-m44 (0143) - Upgraded some builds to use dynamic PWM, for lower lows and smoother ramping: - - @blf-q8-t1616, @sofirn-sp36-t1616 (0613, 0614) - - @gchart-fet1-t1616 (1618) - - @noctigon-k1-sbt90 (0252) + - &blf-q8-t1616, &sofirn-sp36-t1616 (0613, 0614) + - &gchart-fet1-t1616 (1618) + - &noctigon-k1-sbt90 (0252) -- @wurkkos-ts10, @wurkkos-ts10-rgbaux: Fixed too-high default ceiling. (0713, 0714) +- &wurkkos-ts10, &wurkkos-ts10-rgbaux: Fixed too-high default ceiling. (0713, 0714) # 2023-10-01 @@ -75,42 +138,42 @@ General: - Fixed some minor post-off voltage display bugs. - Made RGB button brightness update faster in blinky modes. - Fixed bug: Wrong channel after colored factory reset. -- @attiny1616, @attiny1634: Partially fixed oscillating aux LED voltage +- &attiny1616, &attiny1634: Partially fixed oscillating aux LED voltage colors while off. Better than before, but can still happen in some cases. -- @attiny1616: Fixed spurious voltage warnings in sleep mode. (it could +- &attiny1616: Fixed spurious voltage warnings in sleep mode. (it could sometimes go from Lockout mode to Off mode by itself) - Lots of internal refactoring. New lights: -- @emisar-2ch-fet: Added. (0136) -- @emisar-d4k-3ch: Added. (0151) -- @noctigon-m44: Added. (0143) -- @wurkkos-ts10-rgbaux: Added. (0713) +- &emisar-2ch-fet: Added. (0136) +- &emisar-d4k-3ch: Added. (0151) +- &noctigon-m44: Added. (0143) +- &wurkkos-ts10-rgbaux: Added. (0713) Hardware-specific changes: -- @ff-e01, @ff-pl47, @ff-pl47g2: Enabled smooth steps instead of SOS mode. +- &ff-e01, &ff-pl47, &ff-pl47g2: Enabled smooth steps instead of SOS mode. (0421, 0422, 0423, 0441) -- @emisar-2ch, @noctigon-m44: Added RGB aux channel modes. (0135, 0143) -- @emisar-2ch-fet, @noctigon-k9.3: New ramps with better-calibrated shape. +- &emisar-2ch, &noctigon-m44: Added RGB aux channel modes. (0135, 0143) +- &emisar-2ch-fet, &noctigon-k9.3: New ramps with better-calibrated shape. (0136, 0261) -- @emisar-d4v2-nofet: New ramp table. (0115) -- @emisar-d4sv2-tintramp: Removed / renamed. (0135, 0136) -- @noctigon-k9.3: Fixed years-old mess. Merged builds, converted to +- &emisar-d4v2-nofet: New ramp table. (0115) +- &emisar-d4sv2-tintramp: Removed / renamed. (0135, 0136) +- &noctigon-k9.3: Fixed years-old mess. Merged builds, converted to multi-channel, removed old builds, generally got K9.3 working quite a bit better. (0261, 0262, 0263, 0265, 0266, 0267) -- @noctigon-m44: Lower moon, and greatly reduced flicker. (0143) -- @sofirn-lt1s-pro: Allow configuring the blink channel. (0623) -- @wurkkos: Raised default temperature limit to 50 C. (07xx) -- @wurkkos-ts10: Better / smoother ramp. (0713, 0714) +- &noctigon-m44: Lower moon, and greatly reduced flicker. (0143) +- &sofirn-lt1s-pro: Allow configuring the blink channel. (0623) +- &wurkkos: Raised default temperature limit to 50 C. (07xx) +- &wurkkos-ts10: Better / smoother ramp. (0713, 0714) # 2023-06-29 - Fixed red aux blink on 1st frame of post-off voltage display - Removed Harry Potter references because its author (J.K. Rowling) spreads hate -- @noctigon-kr4: Fixed thermal regulation (0211, 0212, 0213, 0214, 0215, 0216) +- &noctigon-kr4: Fixed thermal regulation (0211, 0212, 0213, 0214, 0215, 0216) # 2023-05-30 @@ -126,18 +189,18 @@ Hardware-specific changes: help ensure it works on all lights. - Minor code changes with no runtime impact - Documented new version check format -- @wurkkos: Added red+blue police strobe (0715, 0716, 0717) -- @noctigon-kr4: Broke thermal regulation (oops) (0211, 0212, 0213, 0214, +- &wurkkos: Added red+blue police strobe (0715, 0716, 0717) +- &noctigon-kr4: Broke thermal regulation (oops) (0211, 0212, 0213, 0214, 0215, 0216) -- @noctigon-kr4: Use 7 aux channel modes instead of 3 (0211, 0212, 0213, 0214, +- &noctigon-kr4: Use 7 aux channel modes instead of 3 (0211, 0212, 0213, 0214, 0215, 0216) -- @emisar-d4v2: Changed number blinks from aux to main LEDs by default (0113, +- &emisar-d4v2: Changed number blinks from aux to main LEDs by default (0113, 0114, 0115, 0123) # 2023-05-17 -- @noctigon-dm11-12v: Renamed to noctigon-dm11-boost (0273) -- @noctigon-dm11-boost: Now supported in multi-channel branch (0273) +- &noctigon-dm11-12v: Renamed to noctigon-dm11-boost (0273) +- &noctigon-dm11-boost: Now supported in multi-channel branch (0273) # 2023-05-02 @@ -160,14 +223,14 @@ Hardware-specific changes: it to the value it saved, which was wrong) - Documented ramp 6C, ramp 4C, ramp 4H, lockout 3H, battcheck 3C, and post-off voltage display config -- @emisar-d4v2: Added the rest of the aux RGB colors as channel modes, and set +- &emisar-d4v2: Added the rest of the aux RGB colors as channel modes, and set aux "white" as the mode it uses to blink out numbers (0113, 0114, 0115, 0123) -- @wurkkos-ts10: Converted to multi-channel, and gave it a new ramp with +- &wurkkos-ts10: Converted to multi-channel, and gave it a new ramp with better low modes (0714) -- @wurkkos-ts25: Converted to multi-channel, and gave it a smoother ramp +- &wurkkos-ts25: Converted to multi-channel, and gave it a smoother ramp (0715) -- @wurkkos: Added Wurkkos FC13 and TS11 (0716, 0717) +- &wurkkos: Added Wurkkos FC13 and TS11 (0716, 0717) # 2023-04-29 @@ -178,13 +241,13 @@ Hardware-specific changes: - Made 3H+ use mem level instead of lowest moon (this is needed for making the channel discernible, and also helps make aux LED controls stand out more) -- @emisar, @noctigon: Added Extended Simple UI to Hank's config, so a few more +- &emisar, &noctigon: Added Extended Simple UI to Hank's config, so a few more features are allowed in simple mode -- @emisar-d4v2, @noctigon-kr4: Slightly smaller ROM size -- @emisar-d4sv2: Converted to multi-channel, and updated it to use dynamic PWM +- &emisar-d4v2, &noctigon-kr4: Slightly smaller ROM size +- &emisar-d4sv2: Converted to multi-channel, and updated it to use dynamic PWM for a smoother ramp with lower lows (0133, 0134) -- @noctigon-kr4: Converted to multi-channel (0211, 0212, 0213, 0214) -- @noctigon-kr4: Don't blink at top of regulated power (0211, 0213, 0214) +- &noctigon-kr4: Converted to multi-channel (0211, 0212, 0213, 0214) +- &noctigon-kr4: Don't blink at top of regulated power (0211, 0213, 0214) # 2023-04-28 @@ -196,8 +259,8 @@ Hardware-specific changes: default) - Changed tactical mode default config: only use 2-color strobe if it's on main LEDs, not aux LEDs -- @emisar-d4v2: Smoother ramp (0113, 0114) -- @emisar-d4v2: Added hidden channel modes for RGB aux LEDs (0113, 0114, 0115) +- &emisar-d4v2: Smoother ramp (0113, 0114) +- &emisar-d4v2: Added hidden channel modes for RGB aux LEDs (0113, 0114, 0115) # 2023-04-27 @@ -207,7 +270,7 @@ Hardware-specific changes: - Fixed unnecessary flickering when changing channel modes from/to the same value - Fixed sleep voltage measurement on attiny1616 -- @noctigon-kr4-tintramp: Converted to multi-channel, renamed to +- &noctigon-kr4-tintramp: Converted to multi-channel, renamed to noctigon-kr4-2ch (0215) # 2023-04-25 @@ -226,15 +289,15 @@ Hardware-specific changes: (this change was obsoleted soon by a better post-off voltage display) - Broke sleep voltage measurement on attiny1616 (oops) - Changed internal details for how gradual ramping works -- @emisar-d4sv2-tintramp: Converted to multi-channel, renamed to emisar-2ch. +- &emisar-d4sv2-tintramp: Converted to multi-channel, renamed to emisar-2ch. (0135) -- @sofirn-lt1s-pro: Updated to use today's new code internals (0623) +- &sofirn-lt1s-pro: Updated to use today's new code internals (0623) # 2023-04-19 - Added stepped tint ramping - Documented new channel modes system -- @sofirn-lt1s-pro: Added white-only auto-tint mode (0623) +- &sofirn-lt1s-pro: Added white-only auto-tint mode (0623) # Older: TODO |