diff options
Diffstat (limited to '')
| -rw-r--r-- | docs/anduril-manual.md | 39 |
1 files changed, 22 insertions, 17 deletions
diff --git a/docs/anduril-manual.md b/docs/anduril-manual.md index 4a1723b..2b7ea30 100644 --- a/docs/anduril-manual.md +++ b/docs/anduril-manual.md @@ -455,16 +455,17 @@ The voltage config menu has these settings: once per desired second, or zero times to turn this function off. - 3. RGB voltage while on high threshold. On lights where the battery - voltage is displayed using RGB aux while the light is on, sets - the ramp level at which the aux will switch to high brightness. - If set to 151, this effectively forces the voltage to only ever - be displayed using low brightness, or if set to 0, to only ever - use high brightness. - - 4. RGB voltage while on minimum level. Below this level, voltage will - not be displayed using the RGB aux at all. Setting this to 151+ - effectively disables the entire feature. + 3. Aux low ramp level. Controls behavior of aux button LEDs while the main + LEDs are on. Below this ramp level, button LEDs will not be lit up while + the main LEDs are on. At or above this level, button LEDs light up at the + "low" brightness level. Setting it to 0 keeps the button LEDs off + completely while the main LEDs are on. + Also controls brightness of post-off voltage display. + + 4. Aux high ramp level. At or above this ramp level, button LEDs light up at + the "high" brightness level. Setting it to 0 disables button's high aux + mode while the main LEDs are on. + Also controls brightness of post-off voltage display. ### Temperature check: @@ -1076,14 +1077,18 @@ This is a table of all button mappings in Anduril, in one place: | Batt check | Full | `3C` | Next channel mode (for number blinks only) | Batt check | Full | `7H` | Voltage config menu | | | | 1: voltage correction factor -| | | | ... -| | | | 5: -0.10V -| | | | 6: -0.05V -| | | | 7: no correction -| | | | 8: +0.05V -| | | | 9: +0.10V -| | | | ... +| | | | ... 5: -0.10V +| | | | ... 6: -0.05V +| | | | ... 7: no correction +| | | | ... 8: +0.05V +| | | | ... 9: +0.10V | | | | 2: post-off voltage display seconds +| | | | 3: aux low ramp level +| | | | ... 0: disabled +| | | | ... 1+: light up at this ramp level +| | | | 4: aux high ramp level +| | | | ... 0: disabled +| | | | ... 1+: brighter at this ramp level | Mode | UI | Button | Action | :--- | :-- | ------: | :----- |