diff options
Diffstat (limited to '')
| -rw-r--r-- | docs/anduril-manual.md | 26 |
1 files changed, 14 insertions, 12 deletions
diff --git a/docs/anduril-manual.md b/docs/anduril-manual.md index b193286..7eea6b6 100644 --- a/docs/anduril-manual.md +++ b/docs/anduril-manual.md @@ -424,25 +424,27 @@ In more detail, this is what each blinky / utility mode does: Blinks out the battery voltage per cell. Full is 4.20V, empty is about 3.00V. The light blinks the whole-number digit first, pauses, -then blinks out the "tenths" digit, pauses, then blinks out the -"hundredths" digit, in 0.02V steps. Then a longer pause, and it -repeats. So for 4.16V, it would be "blink-blink-blink-blink .. blink -.. blink-blink-blink-blink-blink-blink". +then blinks out the "tenths" digit, pauses, then blinks out the "hundredths" +digit, in 0.02V steps. So for 4.16V, it would be "4 blinks, 1 blink, +6 blinks". Then if it is in Advanced UI, it pauses for a bit longer and +repeats. In Simple UI, it turns off after one readout. A "zero" digit is represented by a very quick blink. The battery check format has changed a few times: - - For Anduril 2 from 2024-04 or later, the battery voltage resolution - is 0.02V steps (the last digit can be 0, 2, 4, 6, or 8). + - For Anduril 2 from 2024-04 or later, the battery voltage resolution is + 0.02V steps (the last digit can be 0, 2, 4, 6, or 8). - - For Anduril 2 from 2023-12 or later, the battery voltage resolution - is 0.025V steps (the last digit can be 0, 2, 5, or 7). + - For Anduril 2 from 2023-12 or later, the battery voltage resolution is + 0.025V steps (the last digit can be 0, 2, 5, or 7). - - For Anduril 2 from 2023-12 or earlier, the battery voltage resolution - is 0.1V, so the light blinks the whole-number digit first, pauses, - then blinks out the "tenths" digit. Then a longer pause, and it - repeats. + - For Anduril 2 from 2023-12 or earlier, the battery voltage resolution is + 0.1V, so the light blinks the whole-number digit first, pauses, then blinks + out the "tenths" digit. Then a longer pause, and it repeats. + + - On old attiny85 lights with only 8 KiB of ROM, battery voltage resolution + is 0.1V, even on newer versions of Anduril. On lights with more than one set of LEDs, pressing `3C` during batt check mode can select which set of LEDs (which channel mode) it uses |