diff options
Diffstat (limited to 'hw/hank/emisar-2ch/fet/joined/README.md')
| -rw-r--r-- | hw/hank/emisar-2ch/fet/joined/README.md | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/hw/hank/emisar-2ch/fet/joined/README.md b/hw/hank/emisar-2ch/fet/joined/README.md new file mode 100644 index 0000000..a8b0456 --- /dev/null +++ b/hw/hank/emisar-2ch/fet/joined/README.md @@ -0,0 +1,25 @@ +# Emisar 2-channel driver connected to only 1 set of LEDs + +The default Emisar D4S driver doesn't support a lighted switch, so for lights +built with one of those, Hank puts in a 2-channel driver instead... but he only +connects 1 set of LEDs. + +This is an odd hardware configuration used only for special orders, I think. + +The driver itself has 3 power channels: + + 1. Linear regulator 1 + 2. Linear regulator 2 + 3. Direct-drive FET + +Channels 1 and 3 are connected to the main LEDs, while channel 2 is not +physically wired up to anything. + +Two channel modes are included: + + 1. Linear only + 2. Linear + DD FET + +Channel mode 2 is default, and the only mode enabled after a factory reset. +Channel mode 1 is included in case anyone wants to turn off the DD FET. + |