1 files changed, 118 insertions, 0 deletions
diff --git a/hw/hank/emisar-d3aa/anduril.h b/hw/hank/emisar-d3aa/anduril.h
new file mode 100644
index 0000000..e4e4458
--- /dev/null
+++ b/hw/hank/emisar-d3aa/anduril.h
@@ -0,0 +1,118 @@
+// Emisar D3AA config options for Anduril
+// Copyright (C) 2023 thefreeman, Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define HWDEF_H hank/emisar-d3aa/hwdef.h
+#include "hank/anduril.h"
+
+// HPRsense : 4.2+0.3+20 = 24.5mR
+// Vsense=42.46mV, R1= 165k
+// LPRsense : 3R3
+// HDR ratio: 131.5
+// transition DAC level 20, ramp level 48
+// fifth power ramp 0.02mA to 2001mA
+
+#define RAMP_SIZE 150
+
+// 4 ramp segments:
+//   - low  1.024V
+//   - low  2.5  V
+//   - high 1.024V
+//   - high 2.5  V
+// HDR ratio: 131.5
+// PWM1: DAC Data
+// 131.5 * 1024 * 2.5 = 336640 total dimming ratio
+// ./bin/dac-scale.py $( ./bin/level_calc.py 4.106 1 150 7135 3 0.01 1400 --pwm 336640 | grep PWM1 | cut -d : -f 2- )
+// top level for each "gear": 30 40 119 150
+#define PWM1_LEVELS \
+           3,   5,   6,   9,  12,  16,  21,  28,  35,  44,  55,  68,  83, 101, 121, 144, 170, 200, 234, 271, 313, 360, 412, 470, 534, 603, 680, 764, 855, 954, \
+         434, 482, 534, 590, 650, 715, 784, 858, 938,1023, \
+          20,  21,  23,  25,  27,  30,  32,  35,  37,  40,  43,  46,  49,  53,  56,  60,  64,  68,  73,  77,  82,  87,  93,  98, 104, 110, 116, 123, 129, 137, 144, 152, 160, 168, 177, 185, 195, 204, 214, 225, 235, 247, 258, 270, 282, 295, 308, 322, 336, 350, 365, 381, 396, 413, 430, 447, 465, 484, 503, 522, 543, 563, 585, 607, 629, 653, 677, 701, 726, 752, 779, 806, 834, 863, 892, 923, 954, 985,1018, \
+         430, 444, 459, 473, 488, 504, 520, 536, 552, 569, 587, 604, 622, 641, 660, 679, 699, 719, 740, 761, 782, 804, 827, 849, 873, 897, 921, 946, 971, 997,1023
+#define PWM2_LEVELS \
+         V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
+         V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, \
+         V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
+         V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25
+#define MAX_1x7135            40
+#define HDR_ENABLE_LEVEL_MIN  41
+
+#define DEFAULT_LEVEL         50
+
+// no PWM, so MCU clock speed can be slow
+#define HALFSPEED_LEVEL      41
+#define QUARTERSPEED_LEVEL   40  // seems to run fine at 10kHz/4, try reducing more?
+
+// should be about 300 mA or ~100 lm,
+// to avoid overloading firmware flashing adapters
+#define WEAK_BATTERY_TEST_MAX_LEVEL       75
+
+#define RAMP_SMOOTH_FLOOR    1
+#define RAMP_SMOOTH_CEIL     130  // 50% power
+// 10 30 [50] 70 90 110 130
+#define RAMP_DISCRETE_FLOOR  10
+#define RAMP_DISCRETE_CEIL   130
+#define RAMP_DISCRETE_STEPS  7
+
+// 10 [40] 70 100 130
+#define SIMPLE_UI_FLOOR      10
+#define SIMPLE_UI_CEIL       130
+#define SIMPLE_UI_STEPS      5
+
+// don't blink mid-ramp
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// thermal config
+
+// temperature limit
+#define THERM_FASTER_LEVEL  130 // stop panicking at 50%/1A
+#define MIN_THERM_STEPDOWN  MAX_1x7135
+
+
+// UI
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+
+#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
+
+
+// AUX
+
+#define USE_BUTTON_LED
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// show each channel while it scroll by in the menu
+#define USE_CONFIG_COLORS
+
+// blink numbers on the main LEDs by default (but allow user to change it)
+#define DEFAULT_BLINK_CHANNEL  CM_MAIN
+
+// use aux red + aux blue for police strobe
+#define USE_POLICE_COLOR_STROBE_MODE
+#define POLICE_STROBE_USES_AUX
+#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
+#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
+
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+
+// Misc
+
+#define PARTY_STROBE_ONTIME 1  // slow down party strobe
+#define STROBE_OFF_LEVEL 1  // keep the regulator chip on between pulses
+
+// smoother candle mode with bigger oscillations
+#define CANDLE_AMPLITUDE 33
+
+// added for convenience
+#define USE_SOFT_FACTORY_RESET
+