1 files changed, 114 insertions, 0 deletions
diff --git a/hw/hank/lume-x1/anduril.h b/hw/hank/lume-x1/anduril.h
new file mode 100644
index 0000000..c409e43
--- /dev/null
+++ b/hw/hank/lume-x1/anduril.h
@@ -0,0 +1,114 @@
+// Hank Emisar/Noctigon Lume-X1 config options for Anduril
+// Copyright (C) 2018-2024 Selene ToyKeeper, Loneoceans
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+// For flashlights using the Loneoceans Lume-X1-40W boost driver (AVR32DD20)
+// - Same firmware for 6V, 9V, or 12V configs
+// same as loneoceans lume-x1-avr32dd20 but with Hank-specific defaults
+
+#define HWDEF_H hank/lume-x1/hwdef.h
+#include "hank/anduril.h"
+
+
+
+//***************************************
+//**    RAMP TABLE AND OPERATIONS      **
+//***************************************
+
+#define RAMP_SIZE 150   // Change to 160 as well as table and values below if desired
+
+// PWM1: DAC Data
+// UDR x^4 curves specifically for Lume-X1 (AVR32DD20)
+
+// levels 1 to 5:
+//   ./bin/level_calc.py 5.2 1 5 7135 100 0.01 0.1 --pwm 2500
+//   (with the last 2 values divided to fit)
+// levels 6 to 150:
+//   ./bin/dac-scale.py $( ./bin/level_calc.py 5.3 1 145 7135 17 0.2 3000 --pwm 240000 | grep PWM1 | cut -d : -f 2- )
+// top level for each "gear": 3 5 / 39 50 / 123 150
+#define PWM1_LEVELS \
+         100, 359, 790, 588,1023, \
+          17,  21,  24,  29,  34,  39,  46,  54,  62,  71,  82,  94, 107, 122, 138, 157, 177, 199, 223, 250, 279, 311, 346, 385, 426, 471, 520, 573, 630, 692, 758, 830, 907, 990, \
+         441, 480, 522, 567, 615, 666, 720, 778, 840, 905, 974, \
+          26,  28,  30,  33,  35,  37,  40,  43,  46,  49,  52,  56,  59,  63,  67,  71,  76,  80,  85,  90,  96, 101, 107, 113, 120, 126, 133, 141, 148, 156, 165, 173, 182, 192, 202, 212, 222, 234, 245, 257, 269, 282, 296, 310, 324, 339, 355, 371, 387, 405, 422, 441, 460, 480, 501, 522, 544, 567, 590, 614, 640, 665, 692, 720, 748, 778, 808, 839, 872, 905, 939, 975,1011, \
+         429, 445, 461, 478, 495, 513, 531, 550, 570, 589, 610, 631, 653, 675, 698, 721, 745, 770, 795, 821, 848, 875, 903, 932, 962, 992,1023
+#define PWM2_LEVELS \
+         V10, V10, V10, V25, V25, \
+         V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
+         V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, \
+         V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
+         V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25
+
+#define LED_PATH1_PIN_LEVEL_MIN   1
+#define LED_PATH2_PIN_LEVEL_MIN   6
+#define LED_PATH3_PIN_LEVEL_MIN  51
+
+#define HALFSPEED_LEVEL     20
+#define QUARTERSPEED_LEVEL  10
+
+#define DEFAULT_LEVEL  50
+#define MAX_1x7135     49
+
+#define RAMP_SMOOTH_FLOOR    1
+#define RAMP_SMOOTH_CEIL   130
+
+#define RAMP_DISCRETE_FLOOR   10
+#define RAMP_DISCRETE_CEIL   130
+#define RAMP_DISCRETE_STEPS    7
+
+#define SIMPLE_UI_FLOOR   10
+#define SIMPLE_UI_CEIL   110      // about ~12W
+#define SIMPLE_UI_STEPS    5
+
+// don't blink mid-ramp
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+//***************************************
+//**       THERMAL SETTINGS            **
+//***************************************
+
+// stop panicking at 6W (not sure of this numbers yet since it depends on the host..)
+#define THERM_FASTER_LEVEL 100  // about 6W
+#define MIN_THERM_STEPDOWN 60   // similar to single amc7135 in a 3V light
+
+//***************************************
+//**       AUX LEDs and MISC           **
+//***************************************
+
+#define USE_BUTTON_LED
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// show each channel while it scroll by in the menu
+#define USE_CONFIG_COLORS
+
+// blink numbers on the main LEDs by default (but allow user to change it)
+#define DEFAULT_BLINK_CHANNEL  CM_MAIN
+
+// use aux red + aux blue for police strobe
+#define USE_POLICE_COLOR_STROBE_MODE
+#define POLICE_STROBE_USES_AUX
+#define POLICE_COLOR_STROBE_CH1        CM_AUXRED
+#define POLICE_COLOR_STROBE_CH2        CM_AUXBLU
+
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+#define PARTY_STROBE_ONTIME 1  // slow down party strobe
+#define STROBE_OFF_LEVEL 1  // keep the regulator chips on between pulses
+
+// smoother candle mode with bigger oscillations
+#define CANDLE_AMPLITUDE 30  // default 25
+
+// avr32dd20 has enough space to smooth out voltage readings
+#define USE_VOLTAGE_LOWPASS
+
+// enable long-blink as negative sign
+#define USE_LONG_BLINK_FOR_NEGATIVE_SIGN
+