aboutsummaryrefslogtreecommitdiff
path: root/hw/hank
diff options
context:
space:
mode:
Diffstat (limited to 'hw/hank')
-rw-r--r--hw/hank/emisar-2ch/fet/hwdef.h36
-rw-r--r--hw/hank/emisar-2ch/hwdef.h36
-rw-r--r--hw/hank/emisar-d18/hwdef.h4
-rw-r--r--hw/hank/emisar-d4/hwdef.h4
-rw-r--r--hw/hank/emisar-d4k-3ch/hwdef.h36
-rw-r--r--hw/hank/emisar-d4sv2/hwdef.h6
-rw-r--r--hw/hank/emisar-d4v2/hwdef.h8
-rw-r--r--hw/hank/emisar-d4v2/nofet/anduril.h2
-rw-r--r--hw/hank/noctigon-dm11/boost/hwdef.h38
-rw-r--r--hw/hank/noctigon-dm11/hwdef.h42
-rw-r--r--hw/hank/noctigon-dm11/nofet/anduril.h2
-rw-r--r--hw/hank/noctigon-k1/boost/hwdef.h38
-rw-r--r--hw/hank/noctigon-k1/hwdef.h42
-rw-r--r--hw/hank/noctigon-k1/sbt90/hwdef.h39
-rw-r--r--hw/hank/noctigon-kr4/2ch/hwdef.h4
-rw-r--r--hw/hank/noctigon-kr4/boost/hwdef.h4
-rw-r--r--hw/hank/noctigon-kr4/hwdef.h38
-rw-r--r--hw/hank/noctigon-kr4/nofet/anduril.h2
-rw-r--r--hw/hank/noctigon-m44/hwdef.h38
-rw-r--r--hw/hank/vdivider-1634.h39
20 files changed, 93 insertions, 365 deletions
diff --git a/hw/hank/emisar-2ch/fet/hwdef.h b/hw/hank/emisar-2ch/fet/hwdef.h
index 0778e10..33eef7e 100644
--- a/hw/hank/emisar-2ch/fet/hwdef.h
+++ b/hw/hank/emisar-2ch/fet/hwdef.h
@@ -32,9 +32,7 @@
* The first channel also has a direct-drive FET for turbo.
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/emisar-2ch/fet/hwdef.c
+#define HWDEF_C hank/emisar-2ch/fet/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -106,38 +104,10 @@ enum channel_modes_e {
#define SWITCH_PCMSK PCMSK0 // PCMSK1 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
#endif
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/emisar-2ch/hwdef.h b/hw/hank/emisar-2ch/hwdef.h
index e3707c7..28d1b45 100644
--- a/hw/hank/emisar-2ch/hwdef.h
+++ b/hw/hank/emisar-2ch/hwdef.h
@@ -31,9 +31,7 @@
* and one pin to control the Opamp power level.
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/emisar-2ch/hwdef.c
+#define HWDEF_C hank/emisar-2ch/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -103,38 +101,10 @@ enum channel_modes_e {
#define SWITCH_PCMSK PCMSK0 // PCMSK1 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
#endif
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/emisar-d18/hwdef.h b/hw/hank/emisar-d18/hwdef.h
index 86c97c2..a0d3cd0 100644
--- a/hw/hank/emisar-d18/hwdef.h
+++ b/hw/hank/emisar-d18/hwdef.h
@@ -12,9 +12,7 @@
* ----
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE lumintop/fw3a/hwdef.c
+#define HWDEF_C lumintop/fw3a/hwdef.c
// channel modes
// * 0. FET+N+1 stacked
diff --git a/hw/hank/emisar-d4/hwdef.h b/hw/hank/emisar-d4/hwdef.h
index 55ef72e..6257ddb 100644
--- a/hw/hank/emisar-d4/hwdef.h
+++ b/hw/hank/emisar-d4/hwdef.h
@@ -12,9 +12,7 @@
* ----
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/emisar-d4/hwdef.c
+#define HWDEF_C hank/emisar-d4/hwdef.c
// allow using aux LEDs as extra channel modes (when they exist)
//#ifdef AUXLED_PIN
diff --git a/hw/hank/emisar-d4k-3ch/hwdef.h b/hw/hank/emisar-d4k-3ch/hwdef.h
index 7cfe699..81206c2 100644
--- a/hw/hank/emisar-d4k-3ch/hwdef.h
+++ b/hw/hank/emisar-d4k-3ch/hwdef.h
@@ -35,9 +35,7 @@
* So this code should support both wire layouts.
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/emisar-d4k-3ch/hwdef.c
+#define HWDEF_C hank/emisar-d4k-3ch/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -132,38 +130,10 @@ uint8_t led4_pwm, led4_dsm;
#define SWITCH_PCMSK PCMSK0 // PCMSK1 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
#endif
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/emisar-d4sv2/hwdef.h b/hw/hank/emisar-d4sv2/hwdef.h
index d1e0452..121593a 100644
--- a/hw/hank/emisar-d4sv2/hwdef.h
+++ b/hw/hank/emisar-d4sv2/hwdef.h
@@ -30,9 +30,7 @@
* ADC12 thermal sensor
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/emisar-d4sv2/hwdef.c
+#define HWDEF_C hank/emisar-d4sv2/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -89,7 +87,7 @@ enum CHANNEL_MODES {
#define SWITCH_PCMSK PCMSK0 // PCMSK0 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
#define ADC_PRSCL 0x07 // clk/128
diff --git a/hw/hank/emisar-d4v2/hwdef.h b/hw/hank/emisar-d4v2/hwdef.h
index 9e3f755..1c10004 100644
--- a/hw/hank/emisar-d4v2/hwdef.h
+++ b/hw/hank/emisar-d4v2/hwdef.h
@@ -28,10 +28,8 @@
* ADC12 thermal sensor
*/
-#include <avr/io.h>
-
-#ifndef HWDEF_C_FILE
-#define HWDEF_C_FILE hank/emisar-d4v2/hwdef.c
+#ifndef HWDEF_C
+#define HWDEF_C hank/emisar-d4v2/hwdef.c
#endif
// allow using aux LEDs as extra channel modes
@@ -84,7 +82,7 @@ enum CHANNEL_MODES {
#define SWITCH_PCMSK PCMSK0 // PCMSK0 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
#define ADC_PRSCL 0x07 // clk/128
diff --git a/hw/hank/emisar-d4v2/nofet/anduril.h b/hw/hank/emisar-d4v2/nofet/anduril.h
index b5f9304..e05fb2e 100644
--- a/hw/hank/emisar-d4v2/nofet/anduril.h
+++ b/hw/hank/emisar-d4v2/nofet/anduril.h
@@ -4,7 +4,7 @@
#pragma once
// switch to 1-channel support functions
-#define HWDEF_C_FILE hank/emisar-d4v2/nofet/hwdef.c
+#define HWDEF_C hank/emisar-d4v2/nofet/hwdef.c
#include "hank/emisar-d4v2/anduril.h"
diff --git a/hw/hank/noctigon-dm11/boost/hwdef.h b/hw/hank/noctigon-dm11/boost/hwdef.h
index 5ac2daf..789eac9 100644
--- a/hw/hank/noctigon-dm11/boost/hwdef.h
+++ b/hw/hank/noctigon-dm11/boost/hwdef.h
@@ -36,9 +36,7 @@
* not to change brightness.
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/noctigon-dm11/boost/hwdef.c
+#define HWDEF_C hank/noctigon-dm11/boost/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -101,37 +99,9 @@ uint8_t ch1_pwm, ch1_dsm;
#define SWITCH_PCMSK PCMSK0 // PCMSK0 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
-
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
+
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/noctigon-dm11/hwdef.h b/hw/hank/noctigon-dm11/hwdef.h
index cd21eae..3e3d426 100644
--- a/hw/hank/noctigon-dm11/hwdef.h
+++ b/hw/hank/noctigon-dm11/hwdef.h
@@ -37,10 +37,8 @@
* Some models also have a direct-drive FET for turbo.
*/
-#include <avr/io.h>
-
-#ifndef HWDEF_C_FILE
-#define HWDEF_C_FILE hank/noctigon-kr4/hwdef.c
+#ifndef HWDEF_C
+#define HWDEF_C hank/noctigon-kr4/hwdef.c
#endif
// allow using aux LEDs as extra channel modes
@@ -95,38 +93,10 @@ enum CHANNEL_MODES {
#define SWITCH_PCMSK PCMSK0 // PCMSK0 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
-
-
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
+
+
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/noctigon-dm11/nofet/anduril.h b/hw/hank/noctigon-dm11/nofet/anduril.h
index 12336f1..c13f4ab 100644
--- a/hw/hank/noctigon-dm11/nofet/anduril.h
+++ b/hw/hank/noctigon-dm11/nofet/anduril.h
@@ -4,7 +4,7 @@
#pragma once
// same support functions as a KR4
-#define HWDEF_C_FILE hank/noctigon-kr4/nofet/hwdef.c
+#define HWDEF_C hank/noctigon-kr4/nofet/hwdef.c
#include "hank/noctigon-dm11/anduril.h"
// turn off the DD FET
diff --git a/hw/hank/noctigon-k1/boost/hwdef.h b/hw/hank/noctigon-k1/boost/hwdef.h
index 951932a..db1584c 100644
--- a/hw/hank/noctigon-k1/boost/hwdef.h
+++ b/hw/hank/noctigon-k1/boost/hwdef.h
@@ -34,9 +34,7 @@
* not to change brightness.
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/noctigon-dm11/boost/hwdef.c
+#define HWDEF_C hank/noctigon-dm11/boost/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -99,37 +97,9 @@ uint8_t ch1_pwm, ch1_dsm;
#define SWITCH_PCMSK PCMSK0 // PCMSK0 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
-
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
+
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/noctigon-k1/hwdef.h b/hw/hank/noctigon-k1/hwdef.h
index 9a68401..0d20871 100644
--- a/hw/hank/noctigon-k1/hwdef.h
+++ b/hw/hank/noctigon-k1/hwdef.h
@@ -36,10 +36,8 @@
* not to change brightness.
*/
-#include <avr/io.h>
-
-#ifndef HWDEF_C_FILE
-#define HWDEF_C_FILE hank/noctigon-k1/hwdef.c
+#ifndef HWDEF_C
+#define HWDEF_C hank/noctigon-k1/hwdef.c
#endif
// allow using aux LEDs as extra channel modes
@@ -88,38 +86,10 @@ enum CHANNEL_MODES {
#define SWITCH_PCMSK PCMSK0 // PCMSK0 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
-
-
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
+
+
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/noctigon-k1/sbt90/hwdef.h b/hw/hank/noctigon-k1/sbt90/hwdef.h
index 8186b49..e2d04a9 100644
--- a/hw/hank/noctigon-k1/sbt90/hwdef.h
+++ b/hw/hank/noctigon-k1/sbt90/hwdef.h
@@ -37,9 +37,7 @@
* Also has a direct-drive FET for turbo.
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/noctigon-kr4/hwdef.c
+#define HWDEF_C hank/noctigon-kr4/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -93,38 +91,9 @@ enum CHANNEL_MODES {
#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8]
#define SWITCH_PORT PINB // PINA or PINB or PINC
#define SWITCH_PUE PUEB // pullup group B
-#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8]
-
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// TODO: calibrate this
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#define SWITCH_VECT PCINT1_vect // ISR for PCINT[11:8]
+
+#include "hank/vdivider-1634.h"
#define TEMP_CHANNEL 0b00001111
diff --git a/hw/hank/noctigon-kr4/2ch/hwdef.h b/hw/hank/noctigon-kr4/2ch/hwdef.h
index b23c7cc..28a686d 100644
--- a/hw/hank/noctigon-kr4/2ch/hwdef.h
+++ b/hw/hank/noctigon-kr4/2ch/hwdef.h
@@ -30,8 +30,6 @@
* ADC12 thermal sensor
*/
-#include <avr/io.h>
-
// move the switch to a different pin
#define SWITCH_PIN PB2 // pin 17
#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt
@@ -39,7 +37,7 @@
#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8]
#define SWITCH_PORT PINB // PINA or PINB or PINC
#define SWITCH_PUE PUEB // pullup group B
-#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8]
+#define SWITCH_VECT PCINT1_vect // ISR for PCINT[11:8]
// the rest of the config is the same as the generic Emisar 2ch build
#include "hank/emisar-2ch/hwdef.h"
diff --git a/hw/hank/noctigon-kr4/boost/hwdef.h b/hw/hank/noctigon-kr4/boost/hwdef.h
index f17d263..b923b30 100644
--- a/hw/hank/noctigon-kr4/boost/hwdef.h
+++ b/hw/hank/noctigon-kr4/boost/hwdef.h
@@ -46,12 +46,12 @@
#undef SWITCH_PCMSK
#undef SWITCH_PORT
#undef SWITCH_PUE
-#undef PCINT_vect
+#undef SWITCH_VECT
#define SWITCH_PIN PB2 // pin 17
#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt
#define SWITCH_PCIE PCIE1 // PCIE1 is for PCINT[11:8]
#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8]
#define SWITCH_PORT PINB // PINA or PINB or PINC
#define SWITCH_PUE PUEB // pullup group B
-#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8]
+#define SWITCH_VECT PCINT1_vect // ISR for PCINT[11:8]
diff --git a/hw/hank/noctigon-kr4/hwdef.h b/hw/hank/noctigon-kr4/hwdef.h
index 586f848..49e71fa 100644
--- a/hw/hank/noctigon-kr4/hwdef.h
+++ b/hw/hank/noctigon-kr4/hwdef.h
@@ -35,10 +35,8 @@
* Some models also have a direct-drive FET for turbo.
*/
-#include <avr/io.h>
-
-#ifndef HWDEF_C_FILE
-#define HWDEF_C_FILE hank/noctigon-kr4/hwdef.c
+#ifndef HWDEF_C
+#define HWDEF_C hank/noctigon-kr4/hwdef.c
#endif
// allow using aux LEDs as extra channel modes
@@ -93,41 +91,13 @@ enum CHANNEL_MODES {
#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8]
#define SWITCH_PORT PINB // PINA or PINB or PINC
#define SWITCH_PUE PUEB // pullup group B
-#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8]
+#define SWITCH_VECT PCINT1_vect // ISR for PCINT[11:8]
// the button tends to short out the voltage divider,
// so ignore voltage while the button is being held
//#define NO_LVP_WHILE_BUTTON_PRESSED
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/noctigon-kr4/nofet/anduril.h b/hw/hank/noctigon-kr4/nofet/anduril.h
index 4522cde..ad3f012 100644
--- a/hw/hank/noctigon-kr4/nofet/anduril.h
+++ b/hw/hank/noctigon-kr4/nofet/anduril.h
@@ -5,7 +5,7 @@
// (and Noctigon KR1)
// (and Emisar D4v2 E21A, a.k.a. "D4v2.5")
-#define HWDEF_C_FILE hank/noctigon-kr4/nofet/hwdef.c
+#define HWDEF_C hank/noctigon-kr4/nofet/hwdef.c
#include "hank/noctigon-kr4/anduril.h"
// brightness w/ SST-20 4000K LEDs:
diff --git a/hw/hank/noctigon-m44/hwdef.h b/hw/hank/noctigon-m44/hwdef.h
index af942d9..a397212 100644
--- a/hw/hank/noctigon-m44/hwdef.h
+++ b/hw/hank/noctigon-m44/hwdef.h
@@ -28,9 +28,7 @@
* ADC12 thermal sensor
*/
-#include <avr/io.h>
-
-#define HWDEF_C_FILE hank/noctigon-m44/hwdef.c
+#define HWDEF_C hank/noctigon-m44/hwdef.c
// allow using aux LEDs as extra channel modes
#include "fsm/chan-rgbaux.h"
@@ -110,37 +108,9 @@ uint8_t ch2_pwm, ch2_dsm;
#define SWITCH_PCMSK PCMSK0 // PCMSK0 is for PCINT[7:0]
#define SWITCH_PORT PINA // PINA or PINB or PINC
#define SWITCH_PUE PUEA // pullup group A
-#define PCINT_vect PCINT0_vect // ISR for PCINT[7:0]
-
-#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
-#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
-// pin to ADC mappings are in DS table 19-4
-#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
-// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
-#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
-// DS tables 19-3, 19-4
-// Bit 7 6 5 4 3 2 1 0
-// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
-// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
-// divided by ...
-// REFS[1:0] = 1, 0 for internal 1.1V reference
-// other bits reserved
-#define ADMUX_VOLTAGE_DIVIDER 0b10000110
-#define ADC_PRSCL 0x07 // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V
-// calibrate the voltage readout here
-// estimated / calculated values are:
-// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
-// D1, R1, R2 = 0, 330, 100
-#ifndef ADC_44
-//#define ADC_44 981 // raw value at 4.40V
-#define ADC_44 967 // manually tweaked so 4.16V will blink out 4.2
-#endif
-#ifndef ADC_22
-//#define ADC_22 489 // raw value at 2.20V
-#define ADC_22 482 // manually tweaked so 4.16V will blink out 4.2
-#endif
+#define SWITCH_VECT PCINT0_vect // ISR for PCINT[7:0]
+
+#include "hank/vdivider-1634.h"
// this light has aux LEDs under the optic
#define AUXLED_R_PIN PA5 // pin 2
diff --git a/hw/hank/vdivider-1634.h b/hw/hank/vdivider-1634.h
new file mode 100644
index 0000000..171267d
--- /dev/null
+++ b/hw/hank/vdivider-1634.h
@@ -0,0 +1,39 @@
+// attiny1634 voltage divider common defs
+// Copyright (C) 2020-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened
+#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6
+// pin to ADC mappings are in DS table 19-4
+#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1
+// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6
+#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D
+// DS tables 19-3, 19-4
+// Bit 7 6 5 4 3 2 1 0
+// REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0
+// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1
+// divided by ...
+// REFS[1:0] = 1, 0 for internal 1.1V reference
+// other bits reserved
+#define ADMUX_VOLTAGE_DIVIDER 0b10000110
+#undef voltage_raw2cooked
+#define voltage_raw2cooked mcu_vdivider_raw2cooked
+
+#define ADC_PRSCL 0x07 // clk/128
+
+// Raw ADC readings at 4.4V and 2.2V
+// calibrate the voltage readout here
+// estimated / calculated values are:
+// (voltage - D1) * (R2/(R2+R1) * 1024 / 1.1)
+// D1, R1, R2 = 0, 330, 100
+#ifndef ADC_44
+//#define ADC_44 (4*981) // raw value at 4.40V
+#define ADC_44 (4*967) // manually tweaked so 4.16V will blink out 4.2
+#endif
+#ifndef ADC_22
+//#define ADC_22 (4*489) // raw value at 2.20V
+#define ADC_22 (4*482) // manually tweaked so 4.16V will blink out 4.2
+#endif
+
+
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 14:52:46 +0000