diff options
Diffstat (limited to '')
| -rw-r--r-- | hw/lumintop/fw3x-lume1/hwdef.h | 15 |
1 files changed, 9 insertions, 6 deletions
diff --git a/hw/lumintop/fw3x-lume1/hwdef.h b/hw/lumintop/fw3x-lume1/hwdef.h index ca412cc..e50d8b1 100644 --- a/hw/lumintop/fw3x-lume1/hwdef.h +++ b/hw/lumintop/fw3x-lume1/hwdef.h @@ -8,9 +8,9 @@ * * Pin / Name / Function in Lume1 Rev B * 1 PA6 Regulated PWM (PWM1B) - * 2 PA5 R: red aux LED (PWM0B) + * 2 PA5 B: blue aux LED (PWM0B) * 3 PA4 G: green aux LED - * 4 PA3 B: blue aux LED + * 4 PA3 R: red aux LED * 5 PA2 e-switch (PCINT2) * 6 PA1 Jumper 1 * 7 PA0 Jumper 2 @@ -111,16 +111,19 @@ enum CHANNEL_MODES { #define ADMUX_VOLTAGE_DIVIDER 0b00000101 #define ADC_PRSCL 0x06 // clk/64 +#undef voltage_raw2cooked +#define voltage_raw2cooked mcu_vdivider_raw2cooked + // Raw ADC readings at 4.4V and 2.2V // calibrate the voltage readout here // estimated / calculated values are: // [(Vbatt)*(R2/(R2+R1)) / 2.5V] * 1023 // R1 = R2 = 100kR #ifndef ADC_44 -#define ADC_44 900 +#define ADC_44 (4*900) #endif #ifndef ADC_22 -#define ADC_22 450 +#define ADC_22 (4*450) #endif // Default ADMUX_THERM for Temperature is: 0b10001110 in arch/mcu.h @@ -139,9 +142,9 @@ enum CHANNEL_MODES { #define EXTERN_TEMP_FORMULA(m) (((m)-205)/4.09) // this driver allows for aux LEDs under the optic -#define AUXLED_R_PIN PA5 // pin 2 +#define AUXLED_R_PIN PA3 // pin 2 #define AUXLED_G_PIN PA4 // pin 3 -#define AUXLED_B_PIN PA3 // pin 4 +#define AUXLED_B_PIN PA5 // pin 4 #define AUXLED_RGB_PORT PORTA // PORTA or PORTB or PORTC #define AUXLED_RGB_DDR DDRA // DDRA or DDRB or DDRC #define AUXLED_RGB_PUE PUEA // PUEA or PUEB or PUEC |