1 files changed, 0 insertions, 105 deletions
diff --git a/hw/sofirn/blf-lt1/cfg.h b/hw/sofirn/blf-lt1/cfg.h
deleted file mode 100644
index e60c9f7..0000000
--- a/hw/sofirn/blf-lt1/cfg.h
+++ /dev/null
@@ -1,105 +0,0 @@
-// BLF Lantern config options for Anduril
-// Copyright (C) 2018-2023 Selene ToyKeeper
-// SPDX-License-Identifier: GPL-3.0-or-later
-#pragma once
-
-#define MODEL_NUMBER "0621"
-#include "sofirn/blf-lt1/hwdef.h"
-// ATTINY: 85
-
-// the button lights up
-#define USE_INDICATOR_LED
-// the button is visible while main LEDs are on
-#define USE_INDICATOR_LED_WHILE_RAMPING
-// off mode: low (1)
-// lockout: blinking (3)
-#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 1)
-
-// channel modes...
-// CM_CH1, CM_CH2, CM_BOTH, CM_BLEND, CM_AUTO
-#define DEFAULT_CHANNEL_MODE  CM_AUTO
-//#define DEFAULT_BLINK_CHANNEL  CM_BOTH  // takes too much space
-
-// how much to increase total brightness at middle tint
-// (0 = 100% brightness, 64 = 200% brightness)
-//#define TINT_RAMPING_CORRECTION 26  // prototype, 140%
-//#define TINT_RAMPING_CORRECTION 10  // production model, 115%
-#define TINT_RAMPING_CORRECTION 0  // none
-
-#define RAMP_SIZE 150
-// delta-sigma modulated PWM (0b0HHHHHHHHLLLLLLL = 0, 8xHigh, 7xLow bits)
-// (max is (255 << 7), because it's 8-bit PWM plus 7 bits of DSM)
-// level_calc.py 3.333 1 150 7135 32 0.2 600 --pwm 32640
-#define PWM1_LEVELS  32,35,38,41,45,50,55,61,67,74,82,91,100,110,121,133,146,160,175,192,209,227,247,268,291,314,340,366,395,424,456,489,524,560,599,639,681,726,772,820,871,924,979,1036,1096,1158,1222,1289,1359,1431,1506,1584,1664,1747,1834,1923,2015,2111,2209,2311,2416,2524,2636,2751,2870,2992,3118,3247,3380,3518,3659,3803,3952,4105,4262,4423,4589,4759,4933,5111,5294,5482,5674,5871,6073,6279,6491,6707,6928,7155,7386,7623,7865,8113,8365,8624,8888,9157,9432,9713,10000,10292,10591,10895,11206,11523,11846,12175,12511,12853,13202,13557,13919,14287,14663,15045,15434,15830,16233,16644,17061,17486,17919,18358,18805,19260,19723,20193,20671,21156,21650,22152,22662,23180,23706,24241,24784,25335,25895,26464,27041,27627,28222,28826,29439,30060,30691,31332,31981,32640
-
-#define DEFAULT_LEVEL 75
-#define MAX_1x7135 75
-#define HALFSPEED_LEVEL 44
-#define QUARTERSPEED_LEVEL 34
-#undef USE_DYNAMIC_UNDERCLOCKING  // makes huge bumps in the ramp
-
-#define USE_SMOOTH_STEPS
-//#define USE_SET_LEVEL_GRADUALLY
-
-// the default of 26 looks a bit flat, so increase it
-#define CANDLE_AMPLITUDE 40
-
-// override default ramp style
-#undef RAMP_STYLE
-#define RAMP_STYLE  1  // 0 = smooth, 1 = stepped
-// set floor and ceiling as far apart as possible
-// because this lantern isn't overpowered
-#define RAMP_SMOOTH_FLOOR    1
-#define RAMP_SMOOTH_CEIL     150
-#define RAMP_DISCRETE_FLOOR  1
-#define RAMP_DISCRETE_CEIL   150
-#define RAMP_DISCRETE_STEPS  7
-
-// LT1 can handle heat well, so don't limit simple mode
-#define SIMPLE_UI_FLOOR  10
-#define SIMPLE_UI_CEIL   150
-#define SIMPLE_UI_STEPS  5
-
-// Allow 3C in Simple UI for switching between smooth and stepped ramping
-#define USE_SIMPLE_UI_RAMPING_TOGGLE
-#define USE_EXTENDED_SIMPLE_UI
-
-// also at Sofirn's request, enable 2 click turbo (Anduril 1 style)
-#define DEFAULT_2C_STYLE  1
-
-
-// the sensor (attiny85) is nowhere near the emitters
-// so thermal regulation can't work
-#ifdef USE_THERMAL_REGULATION
-#undef USE_THERMAL_REGULATION
-#endif
-
-// don't blink while ramping
-#ifdef BLINK_AT_RAMP_FLOOR
-#undef BLINK_AT_RAMP_FLOOR
-#endif
-#ifdef BLINK_AT_RAMP_MIDDLE
-#undef BLINK_AT_RAMP_MIDDLE
-#endif
-#ifdef BLINK_AT_RAMP_CEIL
-#undef BLINK_AT_RAMP_CEIL
-#endif
-
-// too big, turn off extra features
-//#undef USE_STEPPED_TINT_RAMPING
-#undef USE_MOMENTARY_MODE
-#undef USE_TACTICAL_MODE
-#undef USE_SOS_MODE
-//#undef USE_SIMPLE_UI
-//#undef USE_BEACON_MODE
-//#undef USE_RAMP_SPEED_CONFIG
-#undef USE_RAMP_AFTER_MOON_CONFIG
-#undef USE_2C_STYLE_CONFIG
-#undef USE_VOLTAGE_CORRECTION
-//#undef USE_CHANNEL_PER_STROBE
-// party strobe, tac strobe, lightning, candle, bike
-#define DEFAULT_STROBE_CHANNELS  CM_BOTH,CM_BOTH,CM_AUTO,CM_AUTO,CM_AUTO
-
-// for consistency with other models
-#define USE_SOFT_FACTORY_RESET
-