2 files changed, 91 insertions, 0 deletions
diff --git a/hw/sofirn/blf-q8/cfg.h b/hw/sofirn/blf-q8/cfg.h
new file mode 100644
index 0000000..29dbcb7
--- /dev/null
+++ b/hw/sofirn/blf-q8/cfg.h
@@ -0,0 +1,71 @@
+// BLF Q8 config options for Anduril
+// Copyright (C) 2018-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define MODEL_NUMBER "0611"
+#include "hwdef-blf-q8.h"
+
+#define RAMP_SIZE 150
+
+// the button lights up
+#define USE_INDICATOR_LED
+// the button is visible while main LEDs are on
+#define USE_INDICATOR_LED_WHILE_RAMPING
+// off mode: high (2)
+// lockout: blinking (3)
+#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 2)
+
+// copied from Emisar D4 ramp
+// ../../bin/level_calc.py 1 65 7135 1 0.8 150
+// ... mixed with this:
+// ../../bin/level_calc.py 2 150 7135 4 0.33 150 FET 1 10 1500
+#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,7,8,9,10,12,13,14,15,17,19,20,22,24,26,29,31,34,36,39,42,45,48,51,55,59,62,66,70,75,79,84,89,93,99,104,110,115,121,127,134,140,147,154,161,168,176,184,192,200,209,217,226,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,5,7,8,9,11,12,14,15,17,19,20,22,24,25,27,29,31,33,35,37,39,41,43,45,48,50,52,55,57,59,62,64,67,70,72,75,78,81,84,87,90,93,96,99,102,105,109,112,115,119,122,126,129,133,137,141,144,148,152,156,160,165,169,173,177,182,186,191,195,200,205,209,214,219,224,229,234,239,244,250,255
+
+#define MAX_1x7135 65
+#define DEFAULT_LEVEL 65
+#define HALFSPEED_LEVEL 14
+#define QUARTERSPEED_LEVEL 5
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 120
+// 10 28 46 [65] 83 101 120
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// at Sofirn's request, use max (150) for the Simple UI ceiling
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL 150
+#define SIMPLE_UI_STEPS 5
+
+// also at Sofirn's request, enable 2 click turbo (Anduril 1 style)
+#define DEFAULT_2C_STYLE 1
+
+// enable SOS in the blinkies group
+#define USE_SOS_MODE
+#define USE_SOS_MODE_IN_BLINKY_GROUP
+
+// Allow 3C in Simple UI for switching between smooth and stepped ramping
+#define USE_SIMPLE_UI_RAMPING_TOGGLE
+#define USE_EXTENDED_SIMPLE_UI
+
+// stop panicking at ~75% power or ~3000 lm, this light has high thermal mass
+#define THERM_FASTER_LEVEL (RAMP_SIZE*9/10)  // throttle back faster when high
+
+// don't blink mid-ramp
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+#define USE_SMOOTH_STEPS
+
+// too big, remove stuff to make room
+#undef USE_SOS_MODE
+//#undef USE_RAMP_AFTER_MOON_CONFIG
+//#undef USE_RAMP_SPEED_CONFIG
+//#undef USE_VOLTAGE_CORRECTION
+//#undef USE_2C_STYLE_CONFIG
+//#undef USE_TACTICAL_STROBE_MODE
+#undef USE_TACTICAL_MODE
diff --git a/hw/sofirn/blf-q8/hwdef.h b/hw/sofirn/blf-q8/hwdef.h
new file mode 100644
index 0000000..cdf311d
--- /dev/null
+++ b/hw/sofirn/blf-q8/hwdef.h
@@ -0,0 +1,20 @@
+// BLF Q8 driver layout
+// Copyright (C) 2018-2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+// Q8 driver is the same as a D4, basically
+
+// ... except the Q8 has a lighted button
+#ifndef AUXLED_PIN
+#define AUXLED_PIN   PB4    // pin 3
+#endif
+
+// ... and slightly different calibration
+#ifndef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 7  // add 0.35V
+#endif
+
+// Q8 driver is the same as a D4, basically
+#include "hwdef-emisar-d4.h"
+