aboutsummaryrefslogtreecommitdiff
path: root/hw/wurkkos/ts25
diff options
context:
space:
mode:
Diffstat (limited to 'hw/wurkkos/ts25')
-rw-r--r--hw/wurkkos/ts25/cfg.h87
-rw-r--r--hw/wurkkos/ts25/hwdef.c62
-rw-r--r--hw/wurkkos/ts25/hwdef.h144
3 files changed, 293 insertions, 0 deletions
diff --git a/hw/wurkkos/ts25/cfg.h b/hw/wurkkos/ts25/cfg.h
new file mode 100644
index 0000000..852e91b
--- /dev/null
+++ b/hw/wurkkos/ts25/cfg.h
@@ -0,0 +1,87 @@
+// Wurkkos TS25, modelled after the TS10 but with RGB Aux
+// Copyright (C) 2022-2023 (FIXME)
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define MODEL_NUMBER "0715"
+#include "hwdef-wurkkos-ts25.h"
+#include "wurkkos-cfg.h"
+// ATTINY: 1616
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+// don't turn on the aux LEDs while main LEDs are on
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+// voltage readings were a little high with the Q8 value
+#undef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 5 // add 0.25V, not 0.35V
+
+#define RAMP_SIZE 150
+
+#if 0 // 2022 version
+// level 1 by hand, for the rest
+// level_calc.py 7.01 2 149 7135 3 0.5 125 FET 1 10 1200 --pwm dyn:63:2048:255
+#define PWM1_LEVELS 1,3,3,4,5,6,7,8,9,10,12,13,14,16,17,19,20,22,24,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,64,67,70,72,75,77,80,82,85,87,89,91,93,95,96,98,99,100,100,101,100,100,99,97,95,93,90,86,82,87,91,96,100,106,111,116,122,128,134,141,147,155,162,169,177,186,194,203,213,222,232,243,254,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,4,6,7,9,11,12,14,16,18,20,22,24,27,29,31,34,37,39,42,45,48,51,54,57,61,64,68,72,75,79,83,88,92,97,101,106,111,116,121,126,132,138,144,150,156,162,169,176,183,190,197,205,213,221,229,237,246,255
+#define PWM_TOPS 2047,2047,1198,1322,1584,1676,1701,1691,1662,1622,1774,1703,1631,1692,1613,1639,1558,1564,1559,1478,1464,1444,1420,1392,1361,1329,1331,1293,1256,1246,1207,1192,1152,1133,1094,1074,1035,1013,991,954,932,897,875,842,820,790,760,731,704,678,646,622,593,566,534,510,478,452,423,393,364,338,310,280,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+#define MAX_1x7135 90
+#define HALFSPEED_LEVEL 2
+#define QUARTERSPEED_LEVEL 2
+#endif
+
+// 7135 at 75/150
+// level_calc.py 5.7895 2 150 7135 1 0.1 130 FET 1 10 3000 --pwm dyn:74:4096:255:3
+// (with some manual tweaks)
+#define PWM1_LEVELS 1,1,2,3,3,4,5,6,7,8,9,11,12,13,15,16,18,19,21,23,26,27,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,71,74,76,78,80,82,85,87,90,93,96,100,103,107,112,116,122,127,133,140,147,154,163,171,182,192,203,215,228,241,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
+// non-zero part of FET channel calculated with:
+// level_calc.py 3 1 75 7135 1 200 3000
+// (FIXME? there's a visible bump when the FET kicks in, even with just 1/255)
+#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,2,3,4,6,7,8,10,11,13,14,16,17,19,21,22,24,26,28,30,32,34,37,39,41,44,46,48,51,54,56,59,62,65,68,71,74,77,81,84,87,91,94,98,102,106,110,114,118,122,126,130,135,139,144,148,153,158,163,168,173,178,184,189,195,200,206,212,218,224,230,236,242,248,255
+#define PWM_TOPS 4095,2701,3200,3586,2518,2778,2834,2795,2705,2587,2455,2582,2412,2247,2256,2091,2062,1907,1860,1802,1737,1605,1542,1477,1412,1347,1284,1222,1162,1105,1050,997,946,898,853,810,768,730,693,658,625,594,564,536,503,485,462,439,418,398,384,366,353,340,327,319,307,298,292,284,280,273,269,266,263,260,258,256,256,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
+
+#define MAX_1x7135 75
+#define DEFAULT_LEVEL 50
+#define MIN_THERM_STEPDOWN 60
+#define HALFSPEED_LEVEL 20
+#define QUARTERSPEED_LEVEL 5
+
+#define RAMP_SMOOTH_FLOOR 1
+#define RAMP_SMOOTH_CEIL 150
+// 20 38 56 [75] 93 111 130
+#define RAMP_DISCRETE_FLOOR 20
+#define RAMP_DISCRETE_CEIL 130
+#define RAMP_DISCRETE_STEPS 7
+
+// at Wurkkos's request, reduce the Simple UI ceiling a little bit
+// 25 50 [75] 100 125
+#define SIMPLE_UI_FLOOR 25
+#define SIMPLE_UI_CEIL 125
+#define SIMPLE_UI_STEPS 5
+
+// stop panicking at ~50% power
+#define THERM_FASTER_LEVEL 120 // throttle back faster when high
+
+// show each channel while it scroll by in the menu
+#define USE_CONFIG_COLORS
+
+// blink numbers on the main LEDs by default
+// (so battcheck will be visible while charging)
+#define DEFAULT_BLINK_CHANNEL CM_MAIN
+// blink numbers on the aux LEDs by default
+//#define DEFAULT_BLINK_CHANNEL CM_AUXWHT
+
+// use aux red + aux blue for police strobe
+#define USE_POLICE_COLOR_STROBE_MODE
+#define POLICE_STROBE_USES_AUX
+#define POLICE_COLOR_STROBE_CH1 CM_AUXRED
+#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU
+
+// don't blink mid-ramp
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
diff --git a/hw/wurkkos/ts25/hwdef.c b/hw/wurkkos/ts25/hwdef.c
new file mode 100644
index 0000000..26c9b0d
--- /dev/null
+++ b/hw/wurkkos/ts25/hwdef.c
@@ -0,0 +1,62 @@
+// Wurkkos TS25 PWM helper functions
+// Copyright (C) 2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+
+#pragma once
+
+#include "chan-rgbaux.c"
+
+void set_level_zero();
+
+void set_level_main(uint8_t level);
+bool gradual_tick_main(uint8_t gt);
+
+
+Channel channels[] = {
+ { // channel 1 only
+ .set_level = set_level_main,
+ .gradual_tick = gradual_tick_main
+ },
+ RGB_AUX_CHANNELS
+};
+
+
+void set_level_zero() {
+ CH1_PWM = 0;
+ CH2_PWM = 0;
+ PWM_CNT = 0; // reset phase
+}
+
+// single set of LEDs with 2 stacked power channels, DDFET+1 or DDFET+linear
+void set_level_main(uint8_t level) {
+ PWM_DATATYPE ch1_pwm = PWM_GET(pwm1_levels, level);
+ PWM_DATATYPE ch2_pwm = PWM_GET(pwm2_levels, level);
+ // pulse frequency modulation, a.k.a. dynamic PWM
+ uint16_t top = PWM_GET16(pwm_tops, level);
+
+ CH1_PWM = ch1_pwm;
+ CH2_PWM = ch2_pwm;
+ // wait to sync the counter and avoid flashes
+ // (unnecessary w/ buffered registers)
+ //while(actual_level && (PWM_CNT > (top - 32))) {}
+ PWM_TOP = top;
+ // force reset phase when turning on from zero
+ // (because otherwise the initial response is inconsistent)
+ if (! actual_level) PWM_CNT = 0;
+}
+
+bool gradual_tick_main(uint8_t gt) {
+ PWM_DATATYPE pwm1 = PWM_GET(pwm1_levels, gt);
+ PWM_DATATYPE pwm2 = PWM_GET(pwm2_levels, gt);
+
+ GRADUAL_ADJUST_STACKED(pwm1, CH1_PWM, PWM_TOP_INIT);
+ GRADUAL_ADJUST_SIMPLE (pwm2, CH2_PWM);
+
+ if ( (pwm1 == CH1_PWM)
+ && (pwm2 == CH2_PWM)
+ ) {
+ return true; // done
+ }
+ return false; // not done yet
+}
+
diff --git a/hw/wurkkos/ts25/hwdef.h b/hw/wurkkos/ts25/hwdef.h
new file mode 100644
index 0000000..5eed219
--- /dev/null
+++ b/hw/wurkkos/ts25/hwdef.h
@@ -0,0 +1,144 @@
+// Wurkkos TS25 driver layout
+// Copyright (C) 2022-2023 (FIXME)
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+/*
+ * Driver pinout:
+ * eSwitch: PA5
+ * PWM FET: PB0 (TCA0 WO0)
+ * PWM 1x7135: PB1 (TCA0 WO1)
+ * Voltage: VCC
+ * Aux Red: PC2
+ * Aux Green: PC3
+ * Aux Blue: PC1
+ */
+
+#define ATTINY 1616
+#include <avr/io.h>
+
+#define HWDEF_C_FILE hwdef-wurkkos-ts25.c
+
+// allow using aux LEDs as extra channel modes
+#include "chan-rgbaux.h"
+
+// channel modes:
+// * 0. FET+7135 stacked
+// * 1+. aux RGB
+#define NUM_CHANNEL_MODES (1 + NUM_RGB_AUX_CHANNEL_MODES)
+enum CHANNEL_MODES {
+ CM_MAIN = 0,
+ RGB_AUX_ENUMS
+};
+
+#define DEFAULT_CHANNEL_MODE CM_MAIN
+
+// right-most bit first, modes are in fedcba9876543210 order
+#define CHANNEL_MODES_ENABLED 0b0000000000000001
+
+
+#define PWM_CHANNELS 2 // old, remove this
+
+#define PWM_BITS 16 // dynamic 16-bit, but never goes over 255
+#define PWM_GET PWM_GET8
+#define PWM_DATATYPE uint16_t // is used for PWM_TOPS (which goes way over 255)
+#define PWM_DATATYPE2 uint16_t // only needs 32-bit if ramp values go over 255
+#define PWM1_DATATYPE uint8_t // 1x7135 ramp
+#define PWM2_DATATYPE uint8_t // DD FET ramp
+
+// PWM parameters of both channels are tied together because they share a counter
+#define PWM_TOP TCA0.SINGLE.PERBUF // holds the TOP value for for variable-resolution PWM
+#define PWM_TOP_INIT 255 // highest value used in top half of ramp
+// not necessary when double-buffered "BUF" registers are used
+#define PWM_CNT TCA0.SINGLE.CNT // for resetting phase after each TOP adjustment
+
+// 1x7135 channel
+#define CH1_PIN PB1
+#define CH1_PWM TCA0.SINGLE.CMP1BUF // CMP1 is the output compare register for PB1
+
+// DD FET channel
+#define CH2_PIN PB0
+#define CH2_PWM TCA0.SINGLE.CMP0BUF // CMP0 is the output compare register for PB0
+
+// e-switch
+#define SWITCH_PIN PIN5_bp
+//#define SWITCH_PCINT PCINT0
+#define SWITCH_PORT VPORTA.IN
+#define SWITCH_ISC_REG PORTA.PIN2CTRL
+#define SWITCH_VECT PORTA_PORT_vect
+#define SWITCH_INTFLG VPORTA.INTFLAGS
+//#define PCINT_vect PCINT0_vect
+
+// average drop across diode on this hardware
+#ifndef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 7 // add 0.35V
+#endif
+
+// this driver allows for aux LEDs under the optic
+#define AUXLED_R_PIN PIN2_bp // pin 2
+#define AUXLED_G_PIN PIN3_bp // pin 3
+#define AUXLED_B_PIN PIN1_bp // pin 1
+#define AUXLED_RGB_PORT PORTC // PORTA or PORTB or PORTC
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+
+
+inline void hwdef_setup() {
+
+ // set up the system clock to run at 10 MHz instead of the default 3.33 MHz
+ _PROTECTED_WRITE( CLKCTRL.MCLKCTRLB,
+ CLKCTRL_PDIV_2X_gc | CLKCTRL_PEN_bm );
+
+ //VPORTA.DIR = ...;
+ // Outputs: PWMs
+ VPORTB.DIR = PIN0_bm
+ | PIN1_bm;
+ // RGB aux LEDs
+ VPORTC.DIR = PIN1_bm
+ | PIN2_bm
+ | PIN3_bm;
+
+ // enable pullups on the unused pins to reduce power
+ PORTA.PIN0CTRL = PORT_PULLUPEN_bm;
+ PORTA.PIN1CTRL = PORT_PULLUPEN_bm;
+ PORTA.PIN2CTRL = PORT_PULLUPEN_bm;
+ PORTA.PIN3CTRL = PORT_PULLUPEN_bm;
+ PORTA.PIN4CTRL = PORT_PULLUPEN_bm;
+ PORTA.PIN5CTRL = PORT_PULLUPEN_bm | PORT_ISC_BOTHEDGES_gc; // eSwitch
+ PORTA.PIN6CTRL = PORT_PULLUPEN_bm;
+ PORTA.PIN7CTRL = PORT_PULLUPEN_bm;
+
+ //PORTB.PIN0CTRL = PORT_PULLUPEN_bm; // FET channel
+ //PORTB.PIN1CTRL = PORT_PULLUPEN_bm; // 7135 channel
+ PORTB.PIN2CTRL = PORT_PULLUPEN_bm;
+ PORTB.PIN3CTRL = PORT_PULLUPEN_bm;
+ PORTB.PIN4CTRL = PORT_PULLUPEN_bm;
+ PORTB.PIN5CTRL = PORT_PULLUPEN_bm;
+
+ PORTC.PIN0CTRL = PORT_PULLUPEN_bm;
+ //PORTC.PIN1CTRL = PORT_PULLUPEN_bm; // RGB Aux
+ //PORTC.PIN2CTRL = PORT_PULLUPEN_bm; // RGB Aux
+ //PORTC.PIN3CTRL = PORT_PULLUPEN_bm; // RGB Aux
+
+ // set up the PWM
+ // https://ww1.microchip.com/downloads/en/DeviceDoc/ATtiny1614-16-17-DataSheet-DS40002204A.pdf
+ // PB0 is TCA0:WO0, use TCA_SINGLE_CMP0EN_bm
+ // PB1 is TCA0:WO1, use TCA_SINGLE_CMP1EN_bm
+ // PB2 is TCA0:WO2, use TCA_SINGLE_CMP2EN_bm
+ // For Fast (Single Slope) PWM use TCA_SINGLE_WGMODE_SINGLESLOPE_gc
+ // For Phase Correct (Dual Slope) PWM use TCA_SINGLE_WGMODE_DSBOTTOM_gc
+ // See the manual for other pins, clocks, configs, portmux, etc
+ TCA0.SINGLE.CTRLB = TCA_SINGLE_CMP0EN_bm
+ | TCA_SINGLE_CMP1EN_bm
+ | TCA_SINGLE_WGMODE_DSBOTTOM_gc;
+ TCA0.SINGLE.CTRLA = TCA_SINGLE_CLKSEL_DIV1_gc
+ | TCA_SINGLE_ENABLE_bm;
+
+ PWM_TOP = PWM_TOP_INIT;
+
+}
+
+
+#define LAYOUT_DEFINED
+
If you find this content useful please consider a small donation via bitcoin: bitcoin:1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2?amount=0.001&message=Donation Scraping git contents via cgit is very resource intensive. The continued hosting of these git repositories is entirely financed by your bitcoin contributions. For donations of a least 1 mBTC you include your IP address in the message of your bitcoin donation. This will remove this message in the future for requests from your IP, which will significantly reduce token usage. In any case, any contributions to bitcoin address 1mxKyQsHHugqRxPKgwaA7wUwJEGCNthn2 are very welcome. Thanks in advance for you contribution to a self-sustaining ecosystem.