diff options
Diffstat (limited to 'hw/wurkkos')
| -rw-r--r-- | hw/wurkkos/fc13/README.md | 10 | ||||
| -rw-r--r-- | hw/wurkkos/ts10/rgbaux-lowfet/README.md | 12 | ||||
| -rw-r--r-- | hw/wurkkos/ts10/rgbaux-lowfet/anduril.h | 16 | ||||
| -rw-r--r-- | hw/wurkkos/ts10/rgbaux-lowfet/model | 1 | ||||
| -rw-r--r-- | hw/wurkkos/ts10/rgbaux/anduril.h | 3 | ||||
| -rw-r--r-- | hw/wurkkos/ts11/README.md | 8 | ||||
| -rw-r--r-- | hw/wurkkos/ts25/README.md | 20 |
7 files changed, 70 insertions, 0 deletions
diff --git a/hw/wurkkos/fc13/README.md b/hw/wurkkos/fc13/README.md new file mode 100644 index 0000000..ab9b87f --- /dev/null +++ b/hw/wurkkos/fc13/README.md @@ -0,0 +1,10 @@ +# Wurkkos FC13 + +Single LED 18650 torch with FET+1 driver and RGB button. Includes a built-in +charger / powerbank too, separate from the main torch circuit. + +The Wurkkos SP30S Pro also uses this firmware. + +Either torch may ship with the `0715` (wurkkos-ts25) firmware installed, but +the RGB button does not work fully until upgrading to this FC13 firmware. + diff --git a/hw/wurkkos/ts10/rgbaux-lowfet/README.md b/hw/wurkkos/ts10/rgbaux-lowfet/README.md new file mode 100644 index 0000000..2173723 --- /dev/null +++ b/hw/wurkkos/ts10/rgbaux-lowfet/README.md @@ -0,0 +1,12 @@ +# Wurkkos TS10 w/ RGB aux + reduced-power FET + +Starting in mid-2024, some TS10 models were built with LEDs with lower Vf, and +they destroy themselves when operated at full power from the direct-drive FET. +This branch runs at half power instead, to avoid hardware damage. + +Regardless, sustained turbo is not recommended on any TS10 models, because they +are overpowered for their size and LED type. + +- https://budgetlightforum.com/t/psa-anyone-with-a-new-ts10-do-not-flash-it-with-tks-ts10-rgbaux-firmware-or-turbo-will-fry-its-leds/225124 +- https://www.reddit.com/r/flashlight/comments/1emyyq9/psa_dont_flash_wurkkosts10rgbauxhex_to_your_new/ + diff --git a/hw/wurkkos/ts10/rgbaux-lowfet/anduril.h b/hw/wurkkos/ts10/rgbaux-lowfet/anduril.h new file mode 100644 index 0000000..5d012a5 --- /dev/null +++ b/hw/wurkkos/ts10/rgbaux-lowfet/anduril.h @@ -0,0 +1,16 @@ +// Wurkkos TS10 (RGB aux version with reduced FET output) config options for Anduril +// Copyright (C) 2024 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later +#pragma once + +// most things are the same as TS10-rgbaux +#include "wurkkos/ts10/rgbaux/anduril.h" + +#undef PWM1_LEVELS +#undef PWM2_LEVELS +#undef PWM_TOPS + +#define PWM1_LEVELS 1, 1, 2, 2, 3, 3, 4, 5, 6, 6, 8, 9, 9, 10, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 19, 20, 21, 22, 23, 23, 24, 25, 26, 26, 27, 27, 28, 28, 29, 29, 30, 30, 31, 31, 32, 32, 33, 33, 34, 35, 36, 37, 38, 40, 41, 43, 45, 47, 50, 53, 56, 60, 63, 67, 71, 75, 79, 84, 89, 94, 99,104,110,116,122,129,136,143,150,158,166,174,183,192,202,211,222,232,243,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +// FET half power: +#define PWM2_LEVELS 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 14, 15, 17, 19, 20, 22, 24, 26, 27, 29, 31, 33, 35, 37, 39, 42, 44, 46, 48, 51, 53, 55, 58, 60, 63, 65, 68, 70, 73, 75, 78, 81, 84, 86, 89, 92, 95, 98,101,103,106,109,112,116,119,122,125,128 +#define PWM_TOPS 4095,2893,3917,2806,3252,2703,2684,2660,2640,2370,3000,2900,2630,2549,2246,2193,2030,1961,1889,1716,1642,1569,1497,1428,1290,1232,1176,1122,1070,976,932,890,849,779,745,685,656,605,579,536,514,476,457,424,407,379,364,340,327,314,302,291,280,276,266,262,257,253,253,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 diff --git a/hw/wurkkos/ts10/rgbaux-lowfet/model b/hw/wurkkos/ts10/rgbaux-lowfet/model new file mode 100644 index 0000000..ef15105 --- /dev/null +++ b/hw/wurkkos/ts10/rgbaux-lowfet/model @@ -0,0 +1 @@ +0712 diff --git a/hw/wurkkos/ts10/rgbaux/anduril.h b/hw/wurkkos/ts10/rgbaux/anduril.h index a9d4f90..df0935a 100644 --- a/hw/wurkkos/ts10/rgbaux/anduril.h +++ b/hw/wurkkos/ts10/rgbaux/anduril.h @@ -31,7 +31,10 @@ // level_calc.py 5.7895 2 150 7135 0 0.1 125.25 FET 1 10 1200 --pwm dyn:61:4096:255:2.5 --clock 5:11:2.0 // (with heavy manual tweaks up to ~15/150) #define PWM1_LEVELS 1, 1, 2, 2, 3, 3, 4, 5, 6, 6, 8, 9, 9, 10, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 19, 20, 21, 22, 23, 23, 24, 25, 26, 26, 27, 27, 28, 28, 29, 29, 30, 30, 31, 31, 32, 32, 33, 33, 34, 35, 36, 37, 38, 40, 41, 43, 45, 47, 50, 53, 56, 60, 63, 67, 71, 75, 79, 84, 89, 94, 99,104,110,116,122,129,136,143,150,158,166,174,183,192,202,211,222,232,243,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0 +// FET full power: #define PWM2_LEVELS 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 5, 7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 29, 31, 34, 37, 39, 42, 45, 48, 51, 54, 58, 61, 65, 68, 72, 76, 80, 84, 88, 93, 97,102,107,112,117,122,127,133,139,145,151,157,163,170,177,183,191,198,205,213,221,229,238,246,255 +// FET limited to 200 / 255: +//#define PWM2_LEVELS 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 5, 6, 7, 9, 10, 12, 14, 15, 17, 18, 20, 22, 24, 26, 29, 30, 32, 35, 37, 40, 42, 45, 47, 50, 53, 56, 59, 62, 65, 69, 72, 76, 80, 83, 87, 91, 95, 99,104,109,113,118,123,127,133,138,143,149,155,160,167,173,179,186,192,200 #define PWM_TOPS 4095,2893,3917,2806,3252,2703,2684,2660,2640,2370,3000,2900,2630,2549,2246,2193,2030,1961,1889,1716,1642,1569,1497,1428,1290,1232,1176,1122,1070,976,932,890,849,779,745,685,656,605,579,536,514,476,457,424,407,379,364,340,327,314,302,291,280,276,266,262,257,253,253,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 #define MAX_1x7135 90 #define MIN_THERM_STEPDOWN 60 diff --git a/hw/wurkkos/ts11/README.md b/hw/wurkkos/ts11/README.md new file mode 100644 index 0000000..e53e038 --- /dev/null +++ b/hw/wurkkos/ts11/README.md @@ -0,0 +1,8 @@ +# Wurkkos TS11 + +Single LED 18350 / 18650 torch with FET+1 driver, RGB button, and RGB front +aux. Includes a built-in charger too, separate from the main torch circuit. + +May ship with the `0715` (wurkkos-ts25) firmware installed, but the RGB button +does not work fully until upgrading to this TS11 firmware. + diff --git a/hw/wurkkos/ts25/README.md b/hw/wurkkos/ts25/README.md new file mode 100644 index 0000000..b3c33af --- /dev/null +++ b/hw/wurkkos/ts25/README.md @@ -0,0 +1,20 @@ +# Wurkkos TS25 + +A quad LED 21700 light with FET+1 driver and RGB front aux. A charge port is +built in too, but operates independently and is not visible to the main +firmware. + +Some other Wurkkos models may also ship with this firmware, and should be +upgraded to use a more specific build: + + - FC13: use wurkkos-fc13 + - TS11: use wurkkos-ts11 + - SP30S Pro: use wurkkos-fc13 + +These builds have different aux LED behavior. The difference is whether the +RGB aux is on the front, the side (button), or both. + + - Front: TS25 + - Side: FC13 + - Both: TS11 + |