diff options
Diffstat (limited to '')
| -rw-r--r-- | hwdef-Emisar_D4Sv2-tintramp.h | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/hwdef-Emisar_D4Sv2-tintramp.h b/hwdef-Emisar_D4Sv2-tintramp.h index 1b24238..2b36ed4 100644 --- a/hwdef-Emisar_D4Sv2-tintramp.h +++ b/hwdef-Emisar_D4Sv2-tintramp.h @@ -40,11 +40,12 @@ #define ATTINY 1634 #include <avr/io.h> -#define PWM_CHANNELS 2 // 1 for main LEDs, 1 for 2nd LEDs +#define PWM_CHANNELS 1 // 1 virtual channel (1 for main LEDs + 1 for 2nd LEDs) #define PWM_BITS 12 // 0 to 4095 at 1 kHz, not 0 to 255 at 16 kHz #define PWM_TOP 4095 -// TODO: dynamic PWM with tint ramping -//#define USE_DYN_PWM // dynamic frequency and speed +// dynamic PWM with tint ramping +#define USE_DYN_PWM // dynamic frequency and speed +#define PWM_DATATYPE2 uint16_t // doesn't need 32-bit math #define SWITCH_PIN PA7 // pin 20 #define SWITCH_PCINT PCINT7 // pin 20 pin change interrupt @@ -53,15 +54,20 @@ #define SWITCH_PORT PINA // PINA or PINB or PINC #define PCINT_vect PCINT0_vect // ISR for PCINT[7:0] +// usually PWM1_LVL would be a hardware register, but we need to abstract +// it out to a soft brightness value, in order to handle tint ramping +// (this allows smooth thermal regulation to work, and makes things +// otherwise simpler and easier) +uint16_t PWM1_LVL; #define PWM1_PIN PB3 // pin 16, Opamp reference -#define PWM1_LVL OCR1A // OCR1A is the output compare register for PB3 +#define TINT1_LVL OCR1A // OCR1A is the output compare register for PB3 #define PWM1_CNT TCNT1 // for dynamic PWM, reset phase #define PWM2_PIN PA6 // pin 1, 2nd LED Opamp reference -#define PWM2_LVL OCR1B // OCR1B is the output compare register for PA6 +#define TINT2_LVL OCR1B // OCR1B is the output compare register for PA6 -#define PWM3_PIN PC0 // pin 15, DD FET PWM -#define PWM3_LVL OCR0A // OCR0A is the output compare register for PC0 +//#define PWM3_PIN PC0 // pin 15, DD FET PWM +//#define PWM3_LVL OCR0A // OCR0A is the output compare register for PC0 // PWM parameters of both channels are tied together because they share a counter #define PWM1_TOP ICR1 // holds the TOP value for for variable-resolution PWM @@ -120,7 +126,7 @@ // ... so just hardcode it in each hwdef file instead inline void hwdef_setup() { // enable output ports - DDRC = (1 << PWM3_PIN); + //DDRC = (1 << PWM3_PIN); DDRB = (1 << PWM1_PIN); DDRA = (1 << PWM2_PIN) | (1 << AUXLED_R_PIN) |