diff options
Diffstat (limited to '')
| -rw-r--r-- | hwdef-BLF_GT.h | 4 | ||||
| -rw-r--r-- | hwdef-Emisar_D1Sv2.h | 32 | ||||
| -rw-r--r-- | hwdef-Mateminco_MF01S.h | 4 |
3 files changed, 22 insertions, 18 deletions
diff --git a/hwdef-BLF_GT.h b/hwdef-BLF_GT.h index 01dbdbd..dd8d80a 100644 --- a/hwdef-BLF_GT.h +++ b/hwdef-BLF_GT.h @@ -34,7 +34,9 @@ #ifndef VOLTAGE_PIN #define VOLTAGE_PIN PB2 // pin 7, voltage ADC #define VOLTAGE_CHANNEL 0x01 // MUX 01 corresponds with PB2 -#define VOLTAGE_ADC_DIDR ADC1D // Digital input disable bit corresponding with PB2 +#define VOLTAGE_ADC ADC1D // Digital input disable bit corresponding with PB2 +// inherited from tk-attiny.h +//#define VOLTAGE_ADC_DIDR DIDR0 // DIDR for ADC1 // 1.1V reference, left-adjust, ADC1/PB2 //#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | (1 << ADLAR) | VOLTAGE_CHANNEL) // 1.1V reference, no left-adjust, ADC1/PB2 diff --git a/hwdef-Emisar_D1Sv2.h b/hwdef-Emisar_D1Sv2.h index 5912ea8..856643b 100644 --- a/hwdef-Emisar_D1Sv2.h +++ b/hwdef-Emisar_D1Sv2.h @@ -4,11 +4,11 @@ /* Emisar D1Sv2 driver layout (attiny1634) * * Pin / Name / Function - * 1 PA6 red aux LED (PWM1B) - * 2 PA5 green aux LED (PWM0B) - * 3 PA4 blue aux LED - * 4 PA3 battery voltage (ADC0) - * 5 PA2 (none) + * 1 PA6 (none) (PWM1B) (reserved for DD drivers) + * 2 PA5 R: red aux LED (PWM0B) + * 3 PA4 G: green aux LED + * 4 PA3 B: blue aux LED + * 5 PA2 (none) (reserved for L: button LED (on some models)) * 6 PA1 (none) * 7 PA0 (none) * 8 GND GND @@ -21,7 +21,7 @@ * 15 PC0 (none) PWM0A * 16 PB3 main LED PWM (PWM1A) * 17 PB2 MISO - * 18 PB1 MOSI + * 18 PB1 MOSI / battery voltage (ADC6) * 19 PB0 Opamp power * 20 PA7 e-switch (PCINT7) * ADC12 thermal sensor @@ -54,22 +54,22 @@ #define LED_ENABLE_PIN PB0 // pin 19, Opamp power #define LED_ENABLE_PORT PORTB // control port for PB0 -//#define PWM2_PIN PB0 // pin 19, Opamp power -// FIXME: -//#define PWM2_LVL OCR1B // OCR1B is the output compare register for PB1 #define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened -#define VOLTAGE_PIN PA3 // Pin 4 / PA3 / ADC0 -#define VOLTAGE_ADC_DIDR ADC0D // digital input disable pin for PA3 +#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6 +// pin to ADC mappings are in DS table 19-4 +#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1 +// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6 +#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D // DS tables 19-3, 19-4 // Bit 7 6 5 4 3 2 1 0 // REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0 -// MUX[3:0] = 0, 0, 0, 0 for ADC0 / PA3 +// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1 // divided by ... // REFS[1:0] = 1, 0 for internal 1.1V reference // other bits reserved -#define ADMUX_VOLTAGE_DIVIDER 0b10000000 +#define ADMUX_VOLTAGE_DIVIDER 0b10000110 #define ADC_PRSCL 0x06 // clk/64 // Raw ADC readings at 4.4V and 2.2V @@ -87,9 +87,9 @@ #define TEMP_CHANNEL 0b00001111 // this light has aux LEDs under the optic -#define AUXLED_R_PIN PA6 // pin 1 -#define AUXLED_G_PIN PA5 // pin 2 -#define AUXLED_B_PIN PA4 // pin 3 +#define AUXLED_R_PIN PA5 // pin 2 +#define AUXLED_G_PIN PA4 // pin 3 +#define AUXLED_B_PIN PA3 // pin 4 #define AUXLED_RGB_PORT PORTA // PORTA or PORTB or PORTC #define AUXLED_RGB_DDR DDRA // DDRA or DDRB or DDRC #define AUXLED_RGB_PUE PUEA // PUEA or PUEB or PUEC diff --git a/hwdef-Mateminco_MF01S.h b/hwdef-Mateminco_MF01S.h index ab1c5bf..ad6194c 100644 --- a/hwdef-Mateminco_MF01S.h +++ b/hwdef-Mateminco_MF01S.h @@ -34,7 +34,9 @@ #ifndef VOLTAGE_PIN #define VOLTAGE_PIN PB2 // pin 7, voltage ADC #define VOLTAGE_CHANNEL 0x01 // MUX 01 corresponds with PB2 -#define VOLTAGE_ADC_DIDR ADC1D // Digital input disable bit corresponding with PB2 +#define VOLTAGE_ADC ADC1D // Digital input disable bit corresponding with PB2 +// inherited from tk-attiny.h +//#define VOLTAGE_ADC_DIDR DIDR0 // DIDR for ADC1 // 1.1V reference, left-adjust, ADC1/PB2 //#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | (1 << ADLAR) | VOLTAGE_CHANNEL) // 1.1V reference, no left-adjust, ADC1/PB2 |