diff options
Diffstat (limited to '')
| -rw-r--r-- | hwdef-Mateminco_MT35-Mini.h | 47 | ||||
| -rw-r--r-- | hwdef-thefreeman-lin16dac.h | 2 |
2 files changed, 48 insertions, 1 deletions
diff --git a/hwdef-Mateminco_MT35-Mini.h b/hwdef-Mateminco_MT35-Mini.h new file mode 100644 index 0000000..344f658 --- /dev/null +++ b/hwdef-Mateminco_MT35-Mini.h @@ -0,0 +1,47 @@ +#ifndef HWDEF_MT35_MINI_H +#define HWDEF_MT35_MINI_H + +/* Mateminco MT35-Mini / Astrolux FT03 + * ---- + * Reset -|1 8|- VCC + * eswitch -|2 7|- Aux LED + * 1x7135 -|3 6|- NC + * GND -|4 5|- FET + * ---- + */ + +#define PWM_CHANNELS 2 + +#ifndef SWITCH_PIN +#define SWITCH_PIN PB3 // pin 2 +#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt +#endif + +#ifndef PWM1_PIN +#define PWM1_PIN PB4 // pin 3, 1x7135 PWM +#define PWM1_LVL OCR1B // OCR1B is the output compare register for PB0 +#endif + +#ifndef PWM2_PIN +#define PWM2_PIN PB0 // pin 5, FET PWM +#define PWM2_LVL OCR0A // OCR0A is the output compare register for PB4 +#endif + +#define ADC_PRSCL 0x07 // clk/128 + +// average drop across diode on this hardware +#ifndef VOLTAGE_FUDGE_FACTOR +#define VOLTAGE_FUDGE_FACTOR 7 // add 0.35V +#endif + +// lighted button +#ifndef AUXLED_PIN +#define AUXLED_PIN PB2 // pin 7 +#endif + +#define FAST 0xA3 // fast PWM both channels +#define PHASE 0xA1 // phase-correct PWM both channels + +#define LAYOUT_DEFINED + +#endif diff --git a/hwdef-thefreeman-lin16dac.h b/hwdef-thefreeman-lin16dac.h index 0999c4c..adb7886 100644 --- a/hwdef-thefreeman-lin16dac.h +++ b/hwdef-thefreeman-lin16dac.h @@ -47,7 +47,7 @@ Read voltage from VCC pin, has PFET so no drop // For turning on and off the op-amp #define LED2_ENABLE_PIN PIN7_bp #define LED2_ENABLE_PORT PORTA_OUT - +#define LED2_ENABLE_DELAY 80 // how many ms to delay turning on the lights after enabling the channel // average drop across diode on this hardware #ifndef VOLTAGE_FUDGE_FACTOR |