diff options
Diffstat (limited to '')
| -rw-r--r-- | hwdef-Emisar_D4Sv2.h | 2 | ||||
| -rw-r--r-- | hwdef-Mateminco_MF01-Mini.h | 51 |
2 files changed, 52 insertions, 1 deletions
diff --git a/hwdef-Emisar_D4Sv2.h b/hwdef-Emisar_D4Sv2.h index 8341e21..da3a0ca 100644 --- a/hwdef-Emisar_D4Sv2.h +++ b/hwdef-Emisar_D4Sv2.h @@ -1,7 +1,7 @@ #ifndef HWDEF_EMISAR_D4SV2_H #define HWDEF_EMISAR_D4SV2_H -/* Emisar D4v2 driver layout (attiny1634) +/* Emisar D4Sv2 driver layout (attiny1634) * (same layout as D4v2, except it's a FET+3+1 instead of FET+1) * * Pin / Name / Function diff --git a/hwdef-Mateminco_MF01-Mini.h b/hwdef-Mateminco_MF01-Mini.h new file mode 100644 index 0000000..6c420d7 --- /dev/null +++ b/hwdef-Mateminco_MF01-Mini.h @@ -0,0 +1,51 @@ +#ifndef HWDEF_MF01_MINI_H +#define HWDEF_MF01_MINI_H + +/* MF01-Mini driver layout + * ---- + * Reset -|1 8|- VCC + * eswitch -|2 7|- aux LEDs + * FET PWM -|3 6|- PWM (7x7135) + * GND -|4 5|- PWM (1x7135) + * ---- + */ + +#define PWM_CHANNELS 3 + +#ifndef AUXLED_PIN +#define AUXLED_PIN PB2 // pin 7 +#endif + +#ifndef SWITCH_PIN +#define SWITCH_PIN PB3 // pin 2 +#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt +#endif + +#ifndef PWM1_PIN +#define PWM1_PIN PB0 // pin 5, 1x7135 PWM +#define PWM1_LVL OCR0A // OCR0A is the output compare register for PB0 +#endif +#ifndef PWM2_PIN +#define PWM2_PIN PB1 // pin 6, 7x7135 PWM +#define PWM2_LVL OCR0B // OCR0B is the output compare register for PB1 +#endif +#ifndef PWM3_PIN +#define PWM3_PIN PB4 // pin 3, FET PWM +#define PWM3_LVL OCR1B // OCR1B is the output compare register for PB4 +#endif + +#define ADC_PRSCL 0x06 // clk/64 + +// average drop across diode on this hardware +#ifndef VOLTAGE_FUDGE_FACTOR +#define VOLTAGE_FUDGE_FACTOR 5 // add 0.25V +#endif + +#define TEMP_CHANNEL 0b00001111 + +#define FAST 0xA3 // fast PWM both channels +#define PHASE 0xA1 // phase-correct PWM both channels + +#define LAYOUT_DEFINED + +#endif |