diff options
Diffstat (limited to '')
| -rw-r--r-- | hwdef-noctigon-kr4-nofet.c | 47 | ||||
| -rw-r--r-- | hwdef-noctigon-kr4.h | 6 |
2 files changed, 49 insertions, 4 deletions
diff --git a/hwdef-noctigon-kr4-nofet.c b/hwdef-noctigon-kr4-nofet.c new file mode 100644 index 0000000..ec984df --- /dev/null +++ b/hwdef-noctigon-kr4-nofet.c @@ -0,0 +1,47 @@ +// Noctigon KR4 (no DD FET) PWM helper functions +// Copyright (C) 2020-2023 Selene ToyKeeper +// SPDX-License-Identifier: GPL-3.0-or-later + +#pragma once + +#include "chan-rgbaux.c" + +// single set of LEDs with linear power channel +void set_level_main(uint8_t level) { + if (level == 0) { + CH1_PWM = 0; + CH2_PWM = 0; + PWM_CNT = 0; // reset phase + CH1_ENABLE_PORT &= ~(1 << CH1_ENABLE_PIN); // disable opamp + return; + } + + CH1_ENABLE_PORT |= (1 << CH1_ENABLE_PIN); // enable opamp + + level --; // PWM array index = level - 1 + PWM_DATATYPE ch1_pwm = PWM_GET(pwm1_levels, level); + // pulse frequency modulation, a.k.a. dynamic PWM + uint16_t top = PWM_GET16(pwm_tops, level); + + CH1_PWM = ch1_pwm; + CH2_PWM = 0; + // wait to sync the counter and avoid flashes + while(actual_level && (PWM_CNT > (top - 32))) {} + PWM_TOP = top; + // force reset phase when turning on from zero + // (because otherwise the initial response is inconsistent) + if (! actual_level) PWM_CNT = 0; +} + +bool gradual_tick_main(uint8_t gt) { + PWM_DATATYPE pwm1 = PWM_GET(pwm1_levels, gt); + + GRADUAL_ADJUST_SIMPLE(pwm1, CH1_PWM); + + if ( (pwm1 == CH1_PWM) + ) { + return true; // done + } + return false; // not done yet +} + diff --git a/hwdef-noctigon-kr4.h b/hwdef-noctigon-kr4.h index b20effc..d6c33ff 100644 --- a/hwdef-noctigon-kr4.h +++ b/hwdef-noctigon-kr4.h @@ -37,7 +37,9 @@ #define ATTINY 1634 #include <avr/io.h> +#ifndef HWDEF_C_FILE #define HWDEF_C_FILE hwdef-noctigon-kr4.c +#endif // allow using aux LEDs as extra channel modes #include "chan-rgbaux.h" @@ -92,10 +94,6 @@ #define CH1_PWM OCR1A // OCR1A is the output compare register for PB3 #define CH1_ENABLE_PIN PB0 // pin 19, Opamp power #define CH1_ENABLE_PORT PORTB // control port for PB0 -// TODO: remove these -#define PWM1_PHASE_RESET_OFF // force reset while shutting off -#define PWM1_PHASE_RESET_ON // force reset while turning on -#define PWM1_PHASE_SYNC // manual sync while changing level // DD FET channel #define CH2_PIN PA6 // pin 1, DD FET PWM |