1 files changed, 0 insertions, 60 deletions
diff --git a/hwdef-BLF_GT.h b/hwdef-BLF_GT.h
deleted file mode 100644
index 51b391d..0000000
--- a/hwdef-BLF_GT.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef HWDEF_BLF_GT_H
-#define HWDEF_BLF_GT_H
-
-/* BLF GT driver layout
- *           ----
- *   Reset -|1  8|- VCC (unused)
- * eswitch -|2  7|- Voltage divider
- * AUX LED -|3  6|- Current control (buck level)
- *     GND -|4  5|- PWM (buck output on/off)
- *           ----
- */
-
-#define PWM_CHANNELS 2
-
-#ifndef AUXLED_PIN
-#define AUXLED_PIN   PB4    // pin 3
-#endif
-
-#ifndef SWITCH_PIN
-#define SWITCH_PIN   PB3    // pin 2
-#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
-#endif
-
-#ifndef PWM1_PIN
-#define PWM1_PIN PB0        // pin 5, 1x7135 PWM
-#define PWM1_LVL OCR0A      // OCR0A is the output compare register for PB0
-#endif
-#ifndef PWM2_PIN
-#define PWM2_PIN PB1        // pin 6, FET PWM
-#define PWM2_LVL OCR0B      // OCR0B is the output compare register for PB1
-#endif
-
-#define USE_VOLTAGE_DIVIDER // use a voltage divider on pin 7, not VCC
-#ifndef VOLTAGE_PIN
-#define VOLTAGE_PIN PB2     // pin 7, voltage ADC
-#define VOLTAGE_CHANNEL 0x01 // MUX 01 corresponds with PB2
-#define VOLTAGE_ADC ADC1D  // Digital input disable bit corresponding with PB2
-// inherited from tk-attiny.h
-//#define VOLTAGE_ADC_DIDR DIDR0  // DIDR for ADC1
-// 1.1V reference, left-adjust, ADC1/PB2
-//#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | (1 << ADLAR) | VOLTAGE_CHANNEL)
-// 1.1V reference, no left-adjust, ADC1/PB2
-#define ADMUX_VOLTAGE_DIVIDER ((1 << V_REF) | VOLTAGE_CHANNEL)
-#endif
-#define ADC_PRSCL   0x07    // clk/128
-
-// Raw ADC readings at 4.4V and 2.2V (in-between, we assume values form a straight line)
-#ifndef ADC_44
-#define ADC_44 (184*4)
-#endif
-#ifndef ADC_22
-#define ADC_22 (92*4)
-#endif
-
-#define FAST 0xA3           // fast PWM both channels
-#define PHASE 0xA1          // phase-correct PWM both channels
-
-#define LAYOUT_DEFINED
-
-#endif