1 files changed, 51 insertions, 0 deletions
diff --git a/hwdef-Mateminco_MF01-Mini.h b/hwdef-Mateminco_MF01-Mini.h
new file mode 100644
index 0000000..6c420d7
--- /dev/null
+++ b/hwdef-Mateminco_MF01-Mini.h
@@ -0,0 +1,51 @@
+#ifndef HWDEF_MF01_MINI_H
+#define HWDEF_MF01_MINI_H
+
+/* MF01-Mini driver layout
+ *           ----
+ *   Reset -|1  8|- VCC
+ * eswitch -|2  7|- aux LEDs
+ * FET PWM -|3  6|- PWM (7x7135)
+ *     GND -|4  5|- PWM (1x7135)
+ *           ----
+ */
+
+#define PWM_CHANNELS 3
+
+#ifndef AUXLED_PIN
+#define AUXLED_PIN   PB2    // pin 7
+#endif
+
+#ifndef SWITCH_PIN
+#define SWITCH_PIN   PB3    // pin 2
+#define SWITCH_PCINT PCINT3 // pin 2 pin change interrupt
+#endif
+
+#ifndef PWM1_PIN
+#define PWM1_PIN PB0        // pin 5, 1x7135 PWM
+#define PWM1_LVL OCR0A      // OCR0A is the output compare register for PB0
+#endif
+#ifndef PWM2_PIN
+#define PWM2_PIN PB1        // pin 6, 7x7135 PWM
+#define PWM2_LVL OCR0B      // OCR0B is the output compare register for PB1
+#endif
+#ifndef PWM3_PIN
+#define PWM3_PIN PB4        // pin 3, FET PWM
+#define PWM3_LVL OCR1B      // OCR1B is the output compare register for PB4
+#endif
+
+#define ADC_PRSCL   0x06    // clk/64
+
+// average drop across diode on this hardware
+#ifndef VOLTAGE_FUDGE_FACTOR
+#define VOLTAGE_FUDGE_FACTOR 5  // add 0.25V
+#endif
+
+#define TEMP_CHANNEL 0b00001111
+
+#define FAST 0xA3           // fast PWM both channels
+#define PHASE 0xA1          // phase-correct PWM both channels
+
+#define LAYOUT_DEFINED
+
+#endif