diff options
Diffstat (limited to '')
| -rw-r--r-- | spaghetti-monster/anduril/anduril-manual.txt | 20 |
1 files changed, 16 insertions, 4 deletions
diff --git a/spaghetti-monster/anduril/anduril-manual.txt b/spaghetti-monster/anduril/anduril-manual.txt index 96640f6..3684b50 100644 --- a/spaghetti-monster/anduril/anduril-manual.txt +++ b/spaghetti-monster/anduril/anduril-manual.txt @@ -223,11 +223,23 @@ Momentary Mode Click 5 times from Off to enter Momentary mode. This locks the flashlight into a single-mode interface where the LEDs are only on when -the button is held down. It is intended for Morse code and other -signalling tasks. +the button is held down. It is intended for Morse code, light painting, +and other tasks where the light should be on only for a short time and +probably in a pattern. -Brightness is the last-ramped level, so adjust that before entering -momentary mode. +Momentary mode does either a steady brightness level or a strobe. To +select which one, go to the mode you want to use, adjust the brightness +and speed and other settings, then turn the light off. Then click 5 +times to enter momentary mode. + +Supported momentary modes are steady (normal ramping mode) and strobes +(everything in the "strobe" mode group). + +In steady mode, brightness is the last-ramped level, so adjust that +before entering momentary mode. + +In momentary strobe mode, the settings are copied from the last-used +strobe mode, such as party strobe, tactical strobe, or lightning. To exit this mode, physically disconnect power by unscrewing the tailcap or battery tube. |