diff options
Diffstat (limited to 'spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h')
| -rw-r--r-- | spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h | 63 |
1 files changed, 31 insertions, 32 deletions
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h b/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h index f3a6cdd..c808cd5 100644 --- a/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h +++ b/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h @@ -1,19 +1,12 @@ -// Noctigon K9.3 config options for Anduril -#define MODEL_NUMBER "0261" -#include "hwdef-Noctigon_K9.3.h" +// Emisar D4S V2 tint-ramping config options for Anduril (based on Noctigon K9.3) +#define MODEL_NUMBER "0135" +#include "hwdef-Emisar_D4Sv2-tintramp.h" #include "hank-cfg.h" // ATTINY: 1634 -// this model requires some special code -#define OVERRIDES_FILE cfg-noctigon-k9.3.c -#define OVERRIDE_SET_LEVEL -#define OVERRIDE_GRADUAL_TICK -inline void set_level_override(uint8_t level); - // this light has three aux LED channels: R, G, B #define USE_AUX_RGB_LEDS // the aux LEDs are front-facing, so turn them off while main LEDs are on -//#define USE_AUX_RGB_LEDS_WHILE_ON // it also has an independent LED in the button #define USE_BUTTON_LED // TODO: the whole "indicator LED" thing needs to be refactored into @@ -25,24 +18,22 @@ inline void set_level_override(uint8_t level); // has two channels of independent LEDs #define USE_TINT_RAMPING -// ... but it doesn't make sense to ramp between; only toggle -#define TINT_RAMP_TOGGLE_ONLY +// how much to increase total brightness at middle tint +// (0 = 100% brightness, 64 = 200% brightness) +#define TINT_RAMPING_CORRECTION 0 // none, linear regulator doesn't need it // main LEDs -// max regulated: ~1750 lm -// FET: ~8000 lm +// output: unknown, 2000 lm? +// FET: absent / unused? // 2nd LEDs -// max regulated: ~1500 lm -// maxreg at 120: level_calc.py cube 2 150 7135 0 2.5 1740 FET 1 10 3190 +// output: unknown, 2000 lm? #define RAMP_LENGTH 150 -// main LEDs -#define PWM1_LEVELS 0,0,1,1,2,2,3,3,4,4,5,6,7,8,9,10,11,13,14,15,17,19,20,22,24,26,28,30,33,35,38,40,43,46,49,52,55,59,62,66,70,74,78,82,86,91,96,100,105,111,116,121,127,133,139,145,151,158,165,172,179,186,193,201,209,217,225,234,243,251,261,270,280,289,299,310,320,331,342,353,364,376,388,400,412,425,438,451,464,478,492,506,521,536,551,566,582,597,614,630,647,664,681,699,717,735,754,772,792,811,831,851,871,892,913,935,956,978,1001,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,1023,0 -#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,22,51,79,109,138,168,198,229,260,292,324,357,390,423,457,492,527,562,598,634,671,708,746,784,822,861,901,941,982,1023 -// 2nd LEDs -#define PWM3_LEVELS 0,0,1,1,2,2,3,3,4,4,5,5,6,7,8,9,10,11,12,13,15,16,17,18,20,21,23,24,26,27,29,31,33,35,37,39,41,43,45,48,50,53,55,58,61,63,66,69,72,75,79,82,85,89,92,96,100,104,108,112,116,120,125,129,134,138,143,148,153,158,163,169,174,180,185,191,197,203,209,215,222,228,235,242,248,255,263,270,277,285,292,300,308,316,324,333,341,350,359,368,377,386,395,405,414,424,434,444,454,465,475,486,497,508,519,531,542,554,566,578,590,603,615,628,641,654,667,680,694,708,722,736,750,765,779,794,809,825,840,856,872,888,904,920,937,954,971,988,1005,1023 -#define DEFAULT_LEVEL 46 -#define MAX_1x7135 120 -#define MAX_Nx7135 MAX_1x7135 +// level_calc.py 5.01 1 150 7135 1 0.2 2000 --pwm dyn:80:16383:255 +// abstract ramp (power is split between both sets of LEDs) +#define PWM1_LEVELS 1,1,1,2,2,2,3,4,4,5,6,6,7,8,9,10,12,13,14,16,17,19,21,23,25,27,29,31,33,36,38,41,44,47,50,53,56,59,62,66,69,73,76,80,83,87,90,94,98,101,104,108,111,114,117,120,122,125,127,129,130,131,132,132,132,131,130,128,125,122,118,113,108,101,93,84,75,63,51,37,22,23,24,26,27,28,29,30,32,33,34,36,37,39,40,42,44,46,47,49,51,53,55,57,60,62,64,66,69,71,74,77,80,82,85,88,91,95,98,101,105,108,112,116,120,123,128,132,136,140,145,149,154,159,164,169,174,180,185,191,197,203,209,215,221,228,234,241,248,255 +#define PWM_TOPS 16383,13682,10747,15453,11909,8095,12781,14776,12231,13453,14029,11886,12249,12339,12249,12032,12939,12468,11964,12288,11697,11793,11770,11661,11489,11268,11012,10729,10425,10411,10063,9968,9833,9668,9479,9273,9054,8825,8590,8482,8233,8097,7843,7691,7439,7278,7033,6869,6702,6470,6245,6085,5872,5668,5470,5280,5056,4882,4678,4485,4268,4064,3872,3664,3468,3260,3066,2863,2652,2457,2257,2054,1866,1659,1453,1248,1060,847,651,448,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255 +#define DEFAULT_LEVEL 70 +#define MAX_1x7135 150 #define HALFSPEED_LEVEL 10 #define QUARTERSPEED_LEVEL 2 @@ -50,9 +41,9 @@ inline void set_level_override(uint8_t level); //#define DEFAULT_MANUAL_MEMORY DEFAULT_LEVEL //#define DEFAULT_MANUAL_MEMORY_TIMER 10 -#define RAMP_SMOOTH_FLOOR 3 // level 1 is unreliable (?) -#define RAMP_SMOOTH_CEIL 120 -// 10, 28, [46], 65, 83, 101, [120] +#define RAMP_SMOOTH_FLOOR 10 // level 1 is unreliable (?) +#define RAMP_SMOOTH_CEIL 130 +// 10, 30, 50, [70], 90, 110, [130] #define RAMP_DISCRETE_FLOOR 10 #define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL #define RAMP_DISCRETE_STEPS 7 @@ -62,21 +53,29 @@ inline void set_level_override(uint8_t level); #define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL #define SIMPLE_UI_STEPS 5 -// stop panicking at ~25% power or ~1000 lm -#define THERM_FASTER_LEVEL 100 -#define MIN_THERM_STEPDOWN DEFAULT_LEVEL -//#define THERM_NEXT_WARNING_THRESHOLD 16 // accumulate less error before adjusting -//#define THERM_RESPONSE_MAGNITUDE 128 // bigger adjustments +// stop panicking at ~1500 lm +#define THERM_FASTER_LEVEL 140 +#define MIN_THERM_STEPDOWN 80 // use the brightest setting for strobe #define STROBE_BRIGHTNESS MAX_LEVEL // slow down party strobe; this driver can't pulse for 1ms or less #define PARTY_STROBE_ONTIME 2 +// the default of 26 looks a bit flat, so increase it +#define CANDLE_AMPLITUDE 40 + +// the power regulator is a bit slow, so push it harder for a quick response from off +#define DEFAULT_JUMP_START_LEVEL 21 +#define BLINK_BRIGHTNESS DEFAULT_LEVEL #define BLINK_ONCE_TIME 12 // longer blink, since main LEDs are slow #define THERM_CAL_OFFSET 5 +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + // for consistency with KR4 (not otherwise necessary though) #define USE_SOFT_FACTORY_RESET |