1 files changed, 84 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h b/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h
new file mode 100644
index 0000000..c170645
--- /dev/null
+++ b/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h
@@ -0,0 +1,84 @@
+// Emisar D4S V2 tint-ramping config options for Anduril (based on Noctigon K9.3)
+#define MODEL_NUMBER "0135"
+#include "hwdef-Emisar_D4Sv2-tintramp.h"
+#include "hank-cfg.h"
+// ATTINY: 1634
+
+// this light has three aux LED channels: R, G, B
+#define USE_AUX_RGB_LEDS
+// the aux LEDs are front-facing, so turn them off while main LEDs are on
+// it also has an independent LED in the button
+#define USE_BUTTON_LED
+// TODO: the whole "indicator LED" thing needs to be refactored into
+//       "aux LED(s)" and "button LED(s)" since they work a bit differently
+// enabling this option breaks the button LED on D4v2.5
+#ifdef USE_INDICATOR_LED_WHILE_RAMPING
+#undef USE_INDICATOR_LED_WHILE_RAMPING
+#endif
+
+// has two channels of independent LEDs
+#define USE_TINT_RAMPING
+// how much to increase total brightness at middle tint
+// (0 = 100% brightness, 64 = 200% brightness)
+#define TINT_RAMPING_CORRECTION 0  // none, linear regulator doesn't need it
+
+// main LEDs
+//   output: unknown, 2000 lm?
+//   FET: absent / unused?
+// 2nd LEDs
+//   output: unknown, 2000 lm?
+#define RAMP_LENGTH 150
+// level_calc.py 5.01 1 150 7135 1 0.2 2000 --pwm dyn:74:16383:511
+// abstract ramp (power is split between both sets of LEDs)
+#define PWM1_LEVELS 1,1,1,2,2,2,3,4,4,5,6,6,7,8,9,10,12,13,14,16,17,19,20,22,24,26,28,30,32,35,37,40,42,45,47,50,53,56,59,62,65,68,71,74,77,80,83,86,89,91,94,96,98,100,102,104,105,106,107,107,107,106,105,103,101,98,94,90,84,78,71,63,54,44,33,35,37,38,40,42,44,46,48,50,53,55,57,60,63,65,68,71,74,77,80,83,87,90,94,98,102,106,110,114,118,123,128,132,137,142,148,153,159,164,170,176,183,189,196,202,209,216,224,231,239,247,255,263,272,281,290,299,309,318,328,339,349,360,371,382,394,406,418,430,443,456,469,483,497,511
+#define PWM_TOPS 16383,13673,10738,15435,11908,8123,12779,14756,12240,13447,14013,11907,12263,12351,12261,12048,12926,12464,11972,12278,11704,11789,11180,11134,11013,10837,10620,10371,10100,10113,9793,9718,9376,9248,8898,8738,8560,8369,8168,7961,7749,7535,7321,7107,6895,6686,6480,6278,6080,5823,5639,5403,5178,4965,4763,4570,4346,4134,3936,3714,3507,3283,3074,2853,2648,2433,2211,2006,1776,1564,1351,1137,924,714,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511
+#define DEFAULT_LEVEL 70
+#define MAX_1x7135 150
+#define HALFSPEED_LEVEL 10
+#define QUARTERSPEED_LEVEL 2
+
+#define USE_MANUAL_MEMORY_TIMER_FOR_TINT
+//#define DEFAULT_MANUAL_MEMORY        DEFAULT_LEVEL
+//#define DEFAULT_MANUAL_MEMORY_TIMER  10
+
+#define RAMP_SMOOTH_FLOOR 10  // level 1 is unreliable (?)
+#define RAMP_SMOOTH_CEIL  130
+// 10, 30, 50, [70], 90, 110, [130]
+#define RAMP_DISCRETE_FLOOR 10
+#define RAMP_DISCRETE_CEIL  RAMP_SMOOTH_CEIL
+#define RAMP_DISCRETE_STEPS 7
+
+// safe limit highest regulated power (no FET or turbo)
+#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
+#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
+#define SIMPLE_UI_STEPS 5
+
+// stop panicking at ~1500 lm
+#define THERM_FASTER_LEVEL 140
+#define MIN_THERM_STEPDOWN 75  // should be above highest dyn_pwm level
+
+// use the brightest setting for strobe
+#define STROBE_BRIGHTNESS MAX_LEVEL
+// slow down party strobe; this driver can't pulse for 1ms or less
+#define PARTY_STROBE_ONTIME 2
+
+// the default of 26 looks a bit flat, so increase it
+#define CANDLE_AMPLITUDE 40
+
+// the power regulator is a bit slow, so push it harder for a quick response from off
+#define DEFAULT_JUMP_START_LEVEL 21
+#define BLINK_BRIGHTNESS DEFAULT_LEVEL
+#define BLINK_ONCE_TIME 12  // longer blink, since main LEDs are slow
+
+#define THERM_CAL_OFFSET 5
+
+#ifdef BLINK_AT_RAMP_MIDDLE
+#undef BLINK_AT_RAMP_MIDDLE
+#endif
+
+// for consistency with KR4 (not otherwise necessary though)
+#define USE_SOFT_FACTORY_RESET
+
+
+// work around bizarre bug: lockout mode fails when set to solid color blinking
+#define USE_K93_LOCKOUT_KLUDGE