diff options
Diffstat (limited to 'spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h')
| -rw-r--r-- | spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h b/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h new file mode 100644 index 0000000..c170645 --- /dev/null +++ b/spaghetti-monster/anduril/cfg-emisar-d4sv2-tintramp.h @@ -0,0 +1,84 @@ +// Emisar D4S V2 tint-ramping config options for Anduril (based on Noctigon K9.3) +#define MODEL_NUMBER "0135" +#include "hwdef-Emisar_D4Sv2-tintramp.h" +#include "hank-cfg.h" +// ATTINY: 1634 + +// this light has three aux LED channels: R, G, B +#define USE_AUX_RGB_LEDS +// the aux LEDs are front-facing, so turn them off while main LEDs are on +// it also has an independent LED in the button +#define USE_BUTTON_LED +// TODO: the whole "indicator LED" thing needs to be refactored into +// "aux LED(s)" and "button LED(s)" since they work a bit differently +// enabling this option breaks the button LED on D4v2.5 +#ifdef USE_INDICATOR_LED_WHILE_RAMPING +#undef USE_INDICATOR_LED_WHILE_RAMPING +#endif + +// has two channels of independent LEDs +#define USE_TINT_RAMPING +// how much to increase total brightness at middle tint +// (0 = 100% brightness, 64 = 200% brightness) +#define TINT_RAMPING_CORRECTION 0 // none, linear regulator doesn't need it + +// main LEDs +// output: unknown, 2000 lm? +// FET: absent / unused? +// 2nd LEDs +// output: unknown, 2000 lm? +#define RAMP_LENGTH 150 +// level_calc.py 5.01 1 150 7135 1 0.2 2000 --pwm dyn:74:16383:511 +// abstract ramp (power is split between both sets of LEDs) +#define PWM1_LEVELS 1,1,1,2,2,2,3,4,4,5,6,6,7,8,9,10,12,13,14,16,17,19,20,22,24,26,28,30,32,35,37,40,42,45,47,50,53,56,59,62,65,68,71,74,77,80,83,86,89,91,94,96,98,100,102,104,105,106,107,107,107,106,105,103,101,98,94,90,84,78,71,63,54,44,33,35,37,38,40,42,44,46,48,50,53,55,57,60,63,65,68,71,74,77,80,83,87,90,94,98,102,106,110,114,118,123,128,132,137,142,148,153,159,164,170,176,183,189,196,202,209,216,224,231,239,247,255,263,272,281,290,299,309,318,328,339,349,360,371,382,394,406,418,430,443,456,469,483,497,511 +#define PWM_TOPS 16383,13673,10738,15435,11908,8123,12779,14756,12240,13447,14013,11907,12263,12351,12261,12048,12926,12464,11972,12278,11704,11789,11180,11134,11013,10837,10620,10371,10100,10113,9793,9718,9376,9248,8898,8738,8560,8369,8168,7961,7749,7535,7321,7107,6895,6686,6480,6278,6080,5823,5639,5403,5178,4965,4763,4570,4346,4134,3936,3714,3507,3283,3074,2853,2648,2433,2211,2006,1776,1564,1351,1137,924,714,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511,511 +#define DEFAULT_LEVEL 70 +#define MAX_1x7135 150 +#define HALFSPEED_LEVEL 10 +#define QUARTERSPEED_LEVEL 2 + +#define USE_MANUAL_MEMORY_TIMER_FOR_TINT +//#define DEFAULT_MANUAL_MEMORY DEFAULT_LEVEL +//#define DEFAULT_MANUAL_MEMORY_TIMER 10 + +#define RAMP_SMOOTH_FLOOR 10 // level 1 is unreliable (?) +#define RAMP_SMOOTH_CEIL 130 +// 10, 30, 50, [70], 90, 110, [130] +#define RAMP_DISCRETE_FLOOR 10 +#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL +#define RAMP_DISCRETE_STEPS 7 + +// safe limit highest regulated power (no FET or turbo) +#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR +#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL +#define SIMPLE_UI_STEPS 5 + +// stop panicking at ~1500 lm +#define THERM_FASTER_LEVEL 140 +#define MIN_THERM_STEPDOWN 75 // should be above highest dyn_pwm level + +// use the brightest setting for strobe +#define STROBE_BRIGHTNESS MAX_LEVEL +// slow down party strobe; this driver can't pulse for 1ms or less +#define PARTY_STROBE_ONTIME 2 + +// the default of 26 looks a bit flat, so increase it +#define CANDLE_AMPLITUDE 40 + +// the power regulator is a bit slow, so push it harder for a quick response from off +#define DEFAULT_JUMP_START_LEVEL 21 +#define BLINK_BRIGHTNESS DEFAULT_LEVEL +#define BLINK_ONCE_TIME 12 // longer blink, since main LEDs are slow + +#define THERM_CAL_OFFSET 5 + +#ifdef BLINK_AT_RAMP_MIDDLE +#undef BLINK_AT_RAMP_MIDDLE +#endif + +// for consistency with KR4 (not otherwise necessary though) +#define USE_SOFT_FACTORY_RESET + + +// work around bizarre bug: lockout mode fails when set to solid color blinking +#define USE_K93_LOCKOUT_KLUDGE |